• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.4
• /
• pp.586-591
• /
• 2002

Bruxism can be generally regarded as a diurnal clenching or nocturnal teeth grinding or a combination of both. Clenching of the teeth is forceful closure of the opposing dentition in a static relationship of the mandible to the maxilla, whereas grinding of the dentition is forceful closure of the opposing dentition in a dynamic maxillo-mandibular relationship as the mandibular arch moves through various excursive positions. The causes of bruxism are not yet discovered clearly, but most consistently mentioned cause is psychological stress. Bruxism can be also associated with sleep disorders, medication, and disturbances of the central nervous system. There is no permanent treatment method of bruxism, so the objectives for management of bruxism are reduction of psychological stress and treatment of signs and symptoms of bruxism by occlusal adjustment, occlusal splint, systemic medication and physical therapy. These cases report present three cases of children with bruxism. The bruxism was reduced in these patients wearing occlusal splint.

• Composites Research
• /
• v.31 no.4
• /
• pp.139-144
• /
• 2018

Long Fiber-reinforced composites have advantages of excellent production efficiency and formability of complex shapes compared to conventional continuous fiber reinforced composite materials. However, if we need to make complicated composite shapes or to assemble parts made of different materials, a variety of joining methods are needed. In general, long fiber prepreg sheet (LFPS) contains mold release agent to facilitate demolding after thermoforming. Therefore, mechanical fastening is required in addition to the adhesive bonding to get proper joining strength. In this study, we proposed a stainless steel insert for co-cure bonding which cures LFPS and bonds the stainless steel insert through thermoforming process. The wing of the insert which is spread during the thermoforming process induces adhesion and mechanical wedging effect and serves as a hook to resist the pulling force. The burn-out method was used to confirm the unfolded state of the stainless steel insert wings inserted into the composite material. The static pull-out test was performed to quantitatively evaluate the joining strength. From these experimental results, the condition which guarantees the most appropriate joining strength was derived.

• Journal of KIISE:Databases
• /
• v.35 no.5
• /
• pp.447-458
• /
• 2008

In this paper, we address an efficient processing scheme for k-nearest neighbor queries to retrieve k static objects in road network databases. Existing methods cannot expect a query processing speed-up by index structures in road network databases, since it is impossible to build an index by the network distance, which cannot meet the triangular inequality requirement, essential for index creation, but only possible in a totally ordered set. Thus, these previous methods suffer from a serious performance degradation in query processing. Another method using pre-computed network distances also suffers from a serious storage overhead to maintain a huge amount of pre-computed network distances. To solve these performance and storage problems at the same time, this paper proposes a novel approach that creates an index for moving objects by approximating their network distances and efficiently processes k-nearest neighbor queries by means of the approximate index. For this approach, we proposed a systematic way of mapping each moving object on a road network into the corresponding absolute position in the m-dimensional space. To meet the triangular inequality this paper proposes a new notion of average network distance, and uses FastMap to map moving objects to their corresponding points in the m-dimensional space. After then, we present an approximate indexing algorithm to build an R*-tree, a multidimensional index, on the m-dimensional points of moving objects. The proposed scheme presents a query processing algorithm capable of efficiently evaluating k-nearest neighbor queries by finding k-nearest points (i.e., k-nearest moving objects) from the m-dimensional index. Finally, a variety of extensive experiments verifies the performance enhancement of the proposed approach by performing especially for the real-life road network databases.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.773-782
• /
• 2020

The development of joint FE models for deep learning neural network (DLNN)-based hybrid FEA is presented. Material models of bolts and bearings in the front axle of tractor, showing complex behavior induced by various tightening conditions, were replaced with DLNN models. Bolts are modeled as one-dimensional Timoshenko beam elements with six degrees of freedom, and bearings as three-dimensional solid elements. Stress-strain data were extracted from all elements after finite element analysis subjected to various load conditions, and DLNN for bolts and bearing were trained with Tensorflow. The DLNN-based joint models were implemented in the ABAQUS user subroutines where stresses from the next increment are updated and the algorithmic tangent stiffness matrix is calculated. Generalization of the trained DLNN in the FE model was verified by subjecting it to a new loading condition. Finally, the DLNN-based FEA for the front axle of the tractor was conducted and the feasibility was verified by comparing with results of a static structural experiment of the actual tractor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.809-819
• /
• 2020

In this study, the twist angle and wing planform shapes were selected as design variables and optimized to secure the stability of the flying-wing type UAV. Flying-wing aircraft has no separated fuselage and tails, which has advantages in aerodynamic characteristics and stealth performance, but it is difficult to secure the flight stability. In this paper, the sweep back angle and twist angle were optimized to obtain the lateral stability, the static margin and wing planform shapes were optimized to improve the longitudinal stability of the flying-wing, then effect of the twist angle was confirmed by comparing the stability of the shape with the winglet and the shape with the twist angle. In the optimization formulation, focusing on improving stability, constraints were established, objective functions and design variables were set, then design variable sensitivity analysis was performed using the Sobol method. AVL was used for aerodynamic analysis and stability analysis, and SQP was used for optimization. The CFD analysis of the optimized shape and the simulation of the dynamic stability proved that the twist angle can be applied to the improvement of the lateral stability as well as the stealth performance in the flying-wing instead of the winglet.

• Progress in Medical Physics
• /
• v.30 no.3
• /
• pp.65-73
• /
• 2019

Purpose: We evaluated the motion-induced dosimetric effects on the field-in-field (FIF) technique for whole-breast irradiation (WBI) using actual patient organ motion data obtained from cine electronic portal imaging device (cine EPID) images during treatment. Materials and Methods: Ten breast cancer patients who received WBI after breast-conserving surgery were selected. The static FIF (SFIF) plan involved the application of two parallel opposing tangential and boost FIFs. To obtain the amplitude of the internal organ motion during treatment, cine EPID images were acquired five times for each patient. The outside contour of the breast (OCB) and chest wall (CW) contour were tracked using in-house motion analysis software. Intrafractional organ motion was analyzed. The dynamic FIF (DFIF) reflecting intrafractional organ motion incorporated into the SFIF plan was calculated and compared with the SFIF in terms of the dose homogeneity index (DHI_90/10) for the target and V₂₀ for the ipsilateral lung. Results: The average motion amplitudes along the X and Y directions were 1.84±1.09 mm and 0.69±0.50 mm for OCB and 1.88±1.07 mm and 1.66±1.49 mm for CW, respectively. The maximum motion amplitudes along the X and Y directions were 5.53 and 2.08 mm for OCB and 5.22 and 6.79 mm for CW, respectively. Significant differences in DHI_90/10 values were observed between SFIF and DFIF (0.94 vs 0.95, P<0.05) in statistical analysis. The average V₂₀ for the lung in the DFIF was slightly higher than that of the SFIF in statistical analysis (19.21 vs 19.00, P<0.05). Conclusion: Our findings indicate that the FIF technique can form a safe and effective treatment method for WBI. Regular monitoring using cine EPID images can be effective in reducing motion-induced dosimetric errors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6977-6984
• /
• 2015

It is faced with the necessity of multi roll forming process of the ball slide rail which is made by adding the separate manufacturing processes, piercing, bending, trimming, to the roll forming process of a continuous plastic deformation, to improve the quality. However, the vibration and noise of the press machine in this process leads to the quality degradation of slide rail manufactured in this process. In this study, the roll was designed considering the optimal strain rates by the roll forming program with finite element method. And to estimate the static stability of the multi process the Von-Mises stress and deformation on the press was calculated with a structural analysis program. Also, to avoid driving systems in the resonance region their natural frequencies in the 1st and 2nd mode were calculated through the modal analysis. To verify its dynamic stability improvement the magnitudes of noise and vibration in the existing and studied system were compared using a microphone and accelerometers. And the widths and surface roughnesses of the rails which had been produced in the existing and studied process were measured. Therefore, it is known that multi roll forming process is stable in the analytical and experimental study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.13-20
• /
• 2017

Unreinforced masonry buildings are vulnerable to lateral forces, such as earthquakes, owing to the nature of the building materials, yet numerous masonry buildings remain in South Korea. Since the majority of the existing masonry buildings were constructed more than 20 years ago, it is necessary to develop economical reinforcement methods for disaster reduction. In this study, external reinforcement of masonry walls using adhesive stiffeners was proposed as a reinforcement method for such age-old masonry buildings. Six specimens were fabricated with different aspect ratios (L/H = 1.0, 1.3, and 2.0) and used in static load tests to verify the reinforcement effect. The experimental results showed that the masonry walls before and after reinforcement were ruptured by rigid body rotation and slip. In addition, the maximum strength, maximum displacement, and dissipated energy of the walls were shown to increase after applying the adhesive stiffeners, thereby verifying the excellent reinforcement effect. Furthermore, an adhesive stiffener design for unreinforced masonry walls was proposed based on the increased shear strength achieved by using conventional glass fibers. The proposed design can be used as a basis for the application of adhesive stiffeners for unreinforced masonry walls.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.281-292
• /
• 2011

In this study, for examining an effect of lower limbs' muscle activity on balance capability when applying sprinter pattern among the PNF, the experiment was conducted as followed. Under the object of 24 people diagnosed by hemiplegia, they were divided into control group and experimental group and the experiment was conducted on the experimental group, three times per a week for six weeks. Experimental group received Sprinter pattern of combined PNF upper extremity and lower extremity pattern. For the lower limbs' muscle activity, effective values of Vastus medialis laterails, medial lateral hamstrings, lateral gastrocnemius' action potential were analyzed. The balance ability tests was conducted with FICSIT-4, FSST and MTD-Balance system. For the significance test of control group and experimental group for measuring time by exercise application method, two-way repeated measure ANOVA was conducted and for the significance test among the groups by each measuring time, independent t-test was conducted. Also, for examining the correlation among the measuring item, pearson correlation was used for the analysis. As the result, the application of sprinter pattern increased muscle activity of lower limbs in paretic side and improve static and dynamic balance ability effectively. Therefore, it will be necessary to develop new intervention by combining active application of the therapeutic intervention program for lower limbs' effective muscle mobilizing in paretic side with various exercising patterns.

• Herbal Formula Science
• /
• v.16 no.2
• /
• pp.1-9
• /
• 2008

Objective : The purpose of this report was to provide the information about activity and safety of Ojeok-san by analyzing domestic/international papers about Ojeok-san. Methods : Domestic/international papers related to Ojeok-san were reviewed and analyzed. These papers were then classified by year, experimental method and subject. Results : The following results were obtained in this study. 1. The studies of Ojeok-san started from 1984 and has continuously increased. The studies were mainly focused on experimental models rather than clinical studies. 2. By subject, papers related to safety were most common with 5 papers among 20 papers. Besides there were papers related to efficacy of analgesic, anti-hyperlipidemic, anti-blood stasis and treatment for uterine myoma. 3. The papers related to safety were mainly focused on the effect of Okeok-san on liver function, renal function or metal concentration of organs such as blood, brain, liver, kidney and bone. Ojeok-san proved to be safe, but more clinical studies regarding the safety are needed hereafter. 4. Papers related to analgesic, anti-pyretic, anti-phlogistic activities of Ojeok-san were in vivo studies, and other papers were about anti-hyperlipidemic activity, apoptosis inducing activity on uterine myeloma cell line and anti blood static activity on hydrocortisone acetate induced blood statis model. 5. Case reports were about anti-lipidemia, analgesic effect for mastalgia/back pain and anxiety disorder due to climacteric changes. Conclusion : Ojeok-san is being used in various ways with analgesic, anti-pyretic, anti-phlogistic, anti-hyperlipidemic, anti-tumor or anti-blood statis activity. However, mechanism study should be conducted at the molecular biology level and more clinical studies on the efficacy of Ojeok-san are needed.