• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1463-1469
• /
• 2020

Multimedia information, including video and voice, is highly utilized in that it is easily understood by people. For this reason, applications have been studied which store multimedia information in IoT devices and transmit information in conjunction with smartphones. The problem is that the size of information can be larger than the capacity of IoT devices due to video and image. In this paper, the multimedia content design technique, which takes into account the limitations of storage capacity, was studied when there is a limit of storage capacity. Considering that the video has a higher understanding of information than text, while the capacity is larger, the solution between information comprehension and capacity is sought. The size of static and dynamic media is a variable and the harm is solved in accordance with the linear planning method. Case studies have shown that the design techniques of this paper are useful.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.5
• /
• pp.287-296
• /
• 2020

The present study aims to improve the accuracy of the maneuvering simulations based on captive model test results. To derive the hydrodynamic coefficients in a self-propelled condition, a mathematical maneuvering model using a whole vehicle model was established. Captive model tests were carried out using the Vertical Planar Motion Mechanism (VPMM) equipment. A motor controller was used to control the constant propeller revolution rate during pure motion tests. The resistance tests, self-propulsion tests, static drift tests, and VPMM tests were performed in the towing tank of Seoul National University. When the vertical drift angle changes, the gravity load on the sensors were changed. The hydrodynamic forces were deduced by subtracting the gravity load from the measured forces. The hydrodynamic coefficients were calculated using the least-square method. The simulation of the turning circle test was compared with the free-running model test result, and the error of the turning radius was 8.3 % compared to the free-running model test.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.2
• /
• pp.53-64
• /
• 2005

Previous secure routing protocols for wireless sensor networks assume that a sink is static. In many cases, however, a sink operated by man or vehicle is moving. A mobile sink creates a lot of technical problems such as reconfiguration of routing path exposure of sink location. and selection of secure access point node, which are not considered by many previous researches. In this paper, we propose a new secure routing scheme for solving such problems using hi-directional hash chain and delegation nodes of grid structure. This scheme provides a secure routing path and prevents attacker from recognizing the location of a mobile sink in sensor networks. This new method reduces the resource requirements compared to the cashed routing schemes. Simulation results also show that the system is secure and efficient enough.

• Structural Engineering and Mechanics
• /
• v.77 no.1
• /
• pp.115-135
• /
• 2021

This paper focuses on examining the effects of span arrangements on displacement responses of plan-symmetric RC frame buildings designed using the direct displacement-based design (DDBD) method by employing non-linear analyses and the skew seismic attack. In order to show the desired performance of DDBD design approach, the force-based design approach is also used to examine the seismic performance of the selected structures. To realize this objective, 8-story buildings with different plans are selected. In addition, the dynamic behavior of the structures is evaluated by selecting 3, 7, and 12-story buildings. In order to perform non-linear analyses, OpenSees software is used for modeling buildings. Results of an experimental model are used to validate the analytical model implemented in OpenSees. The results of non-linear static and non-linear dynamic analyses indicate that changing span arrangements does not affect estimating the responses of structures designed using the DDBD approach, and the results are more or less the same. Next, in order to apply the earthquake in non-principle directions, DDBD structures, designed for one-way performance, are designed again for two-way performance. Time history analyses are performed under a set of artificial acceleration pairs, applied to structures at different angles. It is found that the mean maximum responses of earthquakes at all angles have very good agreement with the design-acceptable limits, while the response of buildings along the height direction has a relatively acceptable and uniform distribution. Meanwhile, changes in the span arrangements did not have a significant effect on displacement responses.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.572-578
• /
• 2021

The purpose of this study was to verify the impact of cognitive and emotional factors on artificial intelligence speakers on the intention of using artificial intelligence speakers. The method for this study was online surveys of people with physical disability. The recognition and necessity of artificial intelligence speakers were also identified, the perceived intimacy, joy, and intention to use them, and a multiple linear regression analysis was conducted to check the influence of each variable on the intention of the disabled to use artificial intelligence speakers. This study have shown that the perceived enjoyment of AI speakers in people with disabilities has shown a significant static effect on their intended use. However, the recognition and necessity of artificial intelligence speakers of the physically handicapped, as well as the perceived intimacy, do not have a statistically significant impact on the intention of using artificial intelligence speakers, according to the analysis. The results of this study suggest that it is necessary to strengthen the elements of enjoyment in order to improve the intention of the disabled to use artificial intelligence speakers, and it is meaningful in that it provides basic data to develop artificial intelligence products and customized services for people with disabilities.

• Computers and Concrete
• /
• v.26 no.6
• /
• pp.547-563
• /
• 2020

In this paper, the influence of axial compression ratio on the mechanical properties of new type joints of side span of rectangular concrete-filled steel tubular column-H-type steel beam is studied. Two new types of side-span joints of rectangular concrete-filled steel tubular column-H-type steel beam are designed and quasi-static tests of five new type joints with 1:2 scale reduction ratios are performed. The axial compression ratio of joint JD1 is 0.3, 0.4 and 0.5, and the axial compression ratio of joint JD2 is 0.3 and 0.5. In the joint test, different axial forces were applied to the top of the column according to different axial compression ratios, and low-cyclic reciprocating load was applied on the beam. The stress and strain distribution, beam and column deformation, limit state, failure process, failure mechanism, stiffness degradation, ductile deformation and energy dissipation capacity of the joint were measured and analyzed. The results show that: with the increase of axial compression ratio, the ultimate bearing capacity of the joint decreases slightly, the plastic deformation decreases, and the stiffness and ductility decrease. According to the energy dissipation curve of the specimen, the equivalent damping coefficient also increases with the increase of axial compression ratio in a certain range, indicating that the increase of axial compression ratio can improve the seismic performance of the joint to a certain extent. The finite element method is used to simulate the joint test, and the test results are in good agreement with the simulation results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.549-555
• /
• 2021

Open hole strength of composite laminates is often used as the design allowable strength for designing composite aircraft structures, particularly those structures subjected to impact loading. Generally, the degradation of strength due to a barely visible impact damage (BVID) is assumed as the strength of 6.0 mm hole diameter in 24.0 mm width specimen. In this study, the residual strength static tests of composite laminates containing circular holes have been performed to investigate the effects of fiber orientation structure on open hole strength. The point stress criterion using a characteristic length is used to predict the open hole strength. The finite element analysis has been used to validate the analytical method. From the test results, it is shown that the characteristic length is related to the percentage of 0°, ±45° and 90° plies of the laminate. And regression analysis has performed to determine the characteristic length and strength of no hole specimens on the arbitrary layup pattern.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.6
• /
• pp.103-114
• /
• 2019

Moving-target detection using frequency-modulated continuous-wave (FMCW) radar systems has recently attracted attention. Detection tasks are more challenging with noise resulting from signals reflected from strong static objects or small moving objects(clutter) within radar range. Robust Principal Component Analysis (RPCA) approach for FMCW radar to detect moving objects in noisy environments is employed in this paper. In detail, compensation and calibration are first applied to raw input signals. Then, RPCA via Gradient Descents (RPCA-GD) is adopted to model the low-rank noisy background. A novel update algorithm for RPCA is proposed to reduce the computation cost. Finally, moving-targets are localized using an Automatic Multiscale-based Peak Detection (AMPD) method. All processing steps are based on a sliding window approach. The proposed scheme shows impressive results in both processing time and accuracy in comparison to other RPCA-based approaches on various experimental scenarios.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.4
• /
• pp.133-142
• /
• 2020

Purpose : The purpose of this study was to investigate the effective recovery method of exercise-induced fatigue and muscle pain by comparing the effect of the use of illite hot mat product and general hot mat product on the recovery of muscle pain induced by high intensity exercise. Methods : To measure and analyze the changes in lactic acid, CRP, and ACR according to the high-intensity circuit training program, this study was conducted for the healthy adult men and women, who exercise st the K-region sports center. A total of 45 subjects were studied in 15 groups of 15 patients who received an illite hot-water mat recovery group (A group), 15 general hot-water mat recovery group (B group), and 15 control group (C group). The circuit training exercise program was conducted as a one-time exercise, and each exercise time consisted of 30 minutes of warm-up exercise, 5 minutes of main exercise, 20 minutes of clean-up exercise, and 5 minutes of strength exercise. The intensity setting was high intensity of subjective exercise intensity It carried out by setting to (14-16RPE). Results : Changes in Lactic Acid Concentration There was a significant difference in the lactic acid concentrations between the groups after the high intensity circuit training program (p <.05). The illite rest group (A) decreased 7.71 mmol / L and the control group decreased 4.03 mmol / L. Significantly decreased (p <.05). Changes in ACR Concentration. There was a significant difference in the ACR concentrations Significant differences were found in CRP and ACR during the recovery period after exercise. (p <.05), the elite rest group (A) decreased 2.47 mg / mmol, and the control group increased 1.63 mg / mmol. There was a significant difference (p <.05). Conclusion: The static rest on a heated mat after high-intensity exercise has an effect on changes in blood lactate and ACR levels.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.4
• /
• pp.509-516
• /
• 2020

An important property of glass and ceramic solid waste forms is processability. Tellurite materials with low melting temperatures and high halite solubilities have potential as solid waste forms. Crystalline TiTe3O8 was synthesized through a solid-state reaction between stoichiometric amounts of TiO2 and TeO2 powder. The resultant TiTe3O8 crystal had a three-dimensional (3D) structure consisting of TiO6 octahedra and asymmetric TeO4 seesaw moiety groups. The melting temperature of the TiTe3O8 powder was 820℃, and the constituent TeO2 began to evaporate selectively from TiTe3O8 above around 840℃. The leaching rate, as determined using the modified American Society of Testing and Materials static leach test method, of Ti in the TiTe3O8 crystal was less than the order of 10-4 g·m-2·d-1 at 90℃ for durations of 14 d over a pH range of 2-12. The chemical durability of the TiTe3O8 crystal, even under highly acidic and alkaline conditions, was comparable to that of other well-known Ti-based solid waste forms.