• 대한한의학원전학회지
• /
• 제30권3호
• /
• pp.109-131
• /
• 2017

Objectives : The purpose of this paper is to study the origin, mechanism, category of Chest bind with static blood(血結胸), the relation to the syndrome of Heat entering the blood chamber(熱入血室證), and the comparison with Chest bind(結胸). Methods : Sikuquanshu(四庫全書), a comprehensive range of medical books, and Shanghanlun(傷寒論) annotation books were searched by 'Chest bind with static blood' keyword and analyzed. Results & Conclusions : 1. The syndrome of Chest bind with static blood is first brought up by ZhuGong(朱肱) and it can be derived from the syndrome of Heat entering the blood chamber or can be shown in upper middle lower energizer Stagnated Blood Syndrome(上中下焦蓄血證, SBC). Ever since the publication of Shanghanquanshengji(傷寒全生集), its category was expanded and prescriptions for the SBC were used. 2. In comparison, the cause of Chest bind with static blood is associated with blood heat(血熱), largely connected with blood, mental illness appeared, lesions are usually chest and sides, and the cause of Chest bind is associated with intermingled water heat (水熱) or phlegm heat(痰熱), not connected with blood, mental illness not appeared, lesions are from the beneath the heart to lower abdomen. 3. The syndrome of Chest bind with static blood derived from the syndrome of Heat entering the blood chamber can appear along side with the Liver Meridian associated with blood chamber or appear in chest, the syndrome appeared in upper energizer SBC can be shown in the chest due to gravity, the one appeared in middle energizer SBC can be shown in the chest due to the same level, the one appeared in lower energizer SBC can be shown in the chest due to the constitutional predisposition of YangQi(陽氣) uprise.

• 한국산업보건학회지
• /
• 제33권2호
• /
• pp.145-155
• /
• 2023

Objectives: A fit test panel is needed to identify the fit performance of a respirator and its face seal. This is a criterion for selecting subjects that can represent the facial characteristics of users. Although anthropometry data has been developed for people in United States and China it is not yet present in Korea. This study aimed to develop a Korean fit test panel and test headform. Methods: For the 7th and 8th waves of the Size Korea anthropometry data, facial measurements of 11,429 people aged 15 to 69 years were used for analysis. PCA and bivariate panel were classified using the ISO16976-2:2022(E) anthropometrics analysis method. Based on this result, a static headform was developemed and a fit test chamber was constructed. Results: Of the 11,429 Korean people used for principal component analysis, 11,300 were included in the ellipse, marking an acceptance rate of 98.87% on PCA panel. The face types were classified into five types. Among them, a large, medium, and small static headform were printed using a 3D printer. In addition, 10,985 people (96.12%) were included in the bivariate panel based on face length and face width. The y-axis (face length) boundary was 97.87 to 134.59 mm, and the x-axis (face width) boundary was 120.75 to 158.23 mm. Conclusions: Compared to the ISO analysis, the Korean principal component was narrower in the width item (PC1) and longer in the length item (PC2). For the future, it is necessary to conduct a fit test using the developed headform and chamber device to confirm the usefulness of this Korean test panel. Therefore, this study is considered valuable as basic research for Korean test panels.

• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.23-40
• /
• 2014

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD's walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near the coating-substrate boundary. Therefore, a micro-scale stress-strain analysis of the multilayered blood chamber was conducted with FE (finite element) code. The multi-scale model included a macro-model of the LVAD's blood chamber and a micro-model of the TiN coating. The theories of non-linear elasticity and elasto-plasticity were applied. The formulated problems were solved with a finite element method. The micro-scale problem was solved for a representative volume element (RVE). This micro-model accounted for the residual stress, a material model of the TiN coating, the stress results under loading pressures, the thickness of the TiN coating and the wave parameters of the TiN surface. The numerical results (displacements and strains) were experimentally validated using digital image correlation (DIC) during static blood pressure deformations. The maximum strain and stress were determined at static pressure steps in a macro-scale FE simulation. The strain and stress were also computed at the same loading conditions in a micro-scale FE simulation.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.195-201
• /
• 1997

Static and non-static flame methods were used to measure the laminar burning velocity of methane, ethane and natural gas. The flame slot angle and velocity of unburned gas mixture were determined by Schlieren method and LDV, respectively, for static flame. The diameter of nozzle was selected as 11 mm. The experimental results containing the stretch effect showed that the maximum burning velocities were 41.5 for natural gas, 40.8 for methane and 43.4 cm/sec for ethane on equivalence ratio of 1.1. Constant volume combustion chamber was also used for non-static flame. The propagation process of flame front was visualized by high speed camera during constant pressure. The maximum burning velocity of natural gas was determined as 42.1 cm/sec on equivalence ratio of 1.15.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1084-1087
• /
• 2017

액체로켓에서 엔진의 시동은 산화제와 연료를 연소기에 매우 짧은 시간의 차를 두고 주입하여야 하며, 이때 주입시간의 간격, 점화기 작동 지연 등은 방대한 량의 추진제 혼합물에 에너지를 인가함으로서 대형 폭발로 이어질 수 있는 상황이 된다. 그러므로 각 추진제의 천이특성과 연소기 또는 가스발생기의 유입 시점을 측정하는 것은 매우 중요하며, 상대적으로 느린 응답 특성을 갖는 정압으로는 유입 시점을 관측하기에는 어려움이 많으므로 추진제 유로를 따라 동압을 측정하여 보다 정확한 유입시점을 찾을 수 있었다.

• 분석과학
• /
• 제24권4호
• /
• pp.290-297
• /
• 2011

현재 자동차 실내공기질을 평가하는 방법이 ISO, 중국, 일본에서 개발 중에 있으며, 우리나라에서도 관리기준이 2010년 7월 1일 이후 생산한 신규제작자동차부터 적용되고 있다. 자동차 실내공기질을 관리하기 위해서는 자동차 실내의 내장부품으로부터 방출되는 휘발성 유기화합물을 평가하는 것이 중요하다. 이 연구에서는 모듈단위부품인 도어트림 모듈의 구성부품인 도어트림 암레스트를 ISO 12219-5방법에 따라 완제품을 평가 하였으며, ISO 12219-3방법으로 절단부품과 도어트림 구성소재를 평가하였다. Tenax TA가 충진된 스테인리스 튜브를 이용하여 VOC를 채취하여 TD-GC/MS를 이용하여 분석하였다. 두 시험방법을 비교한 결과 도어트림 암레스트로부터 방출되는 물질의 비율이 차이가 있음을 확인하였고, 도어트림 암레스트의 소재를 평가한 결과 PP substrate과 adhesive가 도어트림 암레스트에서 주요 방출원인 소재로 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1354-1359
• /
• 2007

This paper discusses the acoustic performance of simple expansion chamber using computational fluid dynamics(CFD). The CFD model consists of an axisymmetric grid with a single period sinusoid of acceptable amplitude and duration imposed at the inlet boundary condition. The time history of the static pressure is recorded at two points, one in the inlet pipe and one point in outlet pipe. The time history of the static pressure is converted to the frequency domain using Fourier Transform and the transmission loss (TL) of the muffler is obtained from the ratio of the static pressure at the inlet and outlet pipe. The transmission loss of CFD result is compared with that of the computational acoustic analysis using the boundary element method (BEM). There are some differences in two results due to the pressure drop according to the inlet and outlet pipe length. Therefore, the effects of the pressure drop to the transmission loss have to be considered.

• 한국항공우주학회지
• /
• 제38권7호
• /
• pp.655-663
• /
• 2010

DUP(direct underside pressurization)는 위그선이 이륙하기 위하여 수면 위를 항주할때 낮은 속도에서 이륙할 수 있도록 양력을 증가시키는 역할을 한다. 이러한 DUP가 위그선의 안정성과 공기역학적인 힘에 미치는 영향에 관하여 3차원 수치해석을 수행하였다. 해석에 사용된 위그선인 "Aircat"은 동체의 중심에 프로펠러가 있고 동체하부에 공기부양실이 있으며 Lippisch형의 날개와 큰 T자형의 수평꼬리날개를 가지고 있다. 저속에서 대부분의 양력은 프로펠러에 의해 가속된 공기가 동체의 가운데 통로를 통하여 공기부양실로 들어가 정체됨으로써 발생한다. 그러나 DUP에 의해 가속된 공기는 동압의 증가로 인하여 항력을 증가 시킬 뿐만 아니라 안정성에 영향을 주게 된다.

• 한국토양비료학회지
• /
• 제28권2호
• /
• pp.183-190
• /
• 1995

논포장에서 배출되는 메탄가스를 측정하기 위하여 간이폐쇄정태 chamber법을 이용하여 대표적인 시료를 채취할 수 있도록 chamber내 시료채취 높이, 시료채취시 시간간격, 하루중 시료 채취시간을 검토하였다. 1. 대표적인 시료채취를 위한 chamber내 높이는 65cm이었고 chamber 하반부에서 시료가 균일하게 섞이도록 DC fan을 추가로 설치할 필요성이 인정되었다. 2. 시간경과에 따른 chamber내 메탄농도의 변화 및 기온의 변화에서 보면 시료채취를 개시하여 30분이내에 시료를 채취하는 것이 바람직하였다. DC fan으로 chamber내부의 공기가 섞이도록 하는 것은 대표적인 시료를 얻기 위한 것 뿐 아니라 chamber내열평형을 이루어 시료(試料) 채취기간중(採取期間中) 식물(植物)의 생리적(生理的) 활성(活性)에 최소한(最小限)의 변화를 주는 방법으로 판단되었다. 3. 하루중 대표적인 메탄 배출량을 나타내는 오전 9시~12시에 시료를 채취하여 분석하되 부득이한 경우에는 또 하나의 평균적인 배출량을 나타내는 오후 6시~8시의 시료를 채취하여 분석하여도 가능할 것으로 판단되었다. 4. 수도주간(水稻株間)진 토양(土壤)에서 메탄 배출을 측정하는데 사용하는 소형의 chamber는 토양을 교란할 수 있으므로 설치한 후 최소한 6시간이 경과되어야 chamber내 메탄농도가 주위의 메탄 농도로 회복되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.414-416
• /
• 2009

In order to build a transient simulation program for a high thrust liquid rocket engine(LRE), a static performance simulation program for components were made. The components were the thrust chamber (combustion chamber and supersonic nozzle), centrifugal pump (impeller and volute casing), impulse turbine, and flow control devices (control valve and orifice). Simplified mathematical models based on classical thermodynamic and inviscid theories were used to remove complexity and enhance the utility of the program. We examined the results of each program qualitatively for validate each component modeling.