• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.4
• /
• pp.227-236
• /
• 1986

In this paper, an integrated voice/data packet network with window flow control is modeled by a colsed multichain queueing system, and its performance is analyzed by the mean value analysis method. Particularly, for the analysis of a packet network having various kinds of messages with different priority classes, we introduce an approach based on the mean value analysis and the concept of effective capacity. By the mathematical analysis and computer simulation, we obtain the following network statistics in the steady state: Mean buffer occupancy at each node, utilization of link throughput of a virtual channel, and mean delay time of each message. Our iterative analysis method can predict the link data status in most cases within about 10 percent of accurady, and the statistics of voice messages and external data within 5 percent as compared to simulation results.

• Journal of Communications and Networks
• /
• v.17 no.2
• /
• pp.172-183
• /
• 2015

To provide an efficient link maintenance approach, we propose a cross layer medium access control (LM-MAC) protocol for multichannel cognitive radio ad hoc networks. Link establishment and reliable transmission are two key problems for a perfect link maintenance mechanism. Since the cognitive user (CU) pairs have to reestablish their links each frame, in the proposed MAC protocol, three different access modes are designed to guarantee transmission efficiency in continuous frames. To enhance the transmission reliability, each CU will create a father spectrum list (FSL) after joining in the network. FSL is divided into three groups of sub-channels with different functions to compensate the packet loss caused by the primary users' appearance and the deep fading. Meanwhile, since the transmitter and the receiver will share the same FSL, periodical cooperative sensing is adopted to further optimize the former problem. Finally, compared with the existing opportunistic multichannel (OMC)-MAC protocol, the proposed LM-MAC protocol achieves better system performance in terms of saturation throughput, continuity and access delay.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.259-267
• /
• 2016

In Wireless Sensor Network, various routing protocols were employed by our Research and Development community to improve the energy efficiency of a network as well as to control the traffic by considering the terms, i.e. Packet delivery rate, the average end-to-end delay, network routing load, average throughput, and total energy consumption. While maintaining network connectivity for a long-term duration, it's necessary that routing protocol must perform in an efficient way. As we discussed Optimized Link State Routing protocol between all of them, we find out that this protocol performs well in the large and dense networks, but with the decrease in network size then scalability of the network decreases. Whenever a link breakage is encountered, OLSR is not able to periodically update its routing table which may create a redundancy problem. To resolve this issue in the OLSR problem of redundancy and predict link breakage, an enhanced protocol, i.e. S-OLSR (More Scalable OLSR) protocol has been proposed. At the end, a comparison among different existing protocols, i.e. DSR, AODV, OLSR with the proposed protocol, i.e. S-OLSR is drawn by using the NS-2 simulator.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.363-372
• /
• 2005

This paper presents an improved sensorless vector control system for high performance induction motor drives fed by a matrix converter with non-linearity compensation. The nonlinear voltage distortion that is caused by commutation delay and on-state voltage drop in switching devices is corrected by a new matrix converter model. A Reduced Order Extended Luenberger Observer (ROELO) is employed to bring better response in the whole speed operation range and a method to select the observer gain is presented. Experimental results are shown to illustrate the performance of the proposed system.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.953-960
• /
• 2002

Rel-time application programs have constraints which need to be met between media-data. It is client-leading synchronization that is absorbing variable transmission delay time and that is synchronizing by feedback control and palyout control. It is the important factor for playback rate and QoS if the buffer level is normal or not. This paper, The method of maintenance buffer normal state transmits in multimedia server by appling feedback of filtering function. And synchronization method is processing adaptive playout time for smooth presentation without cut-off while media frame is skip. When audio frame which is master media is in upper threshold buffer level we decrease play out time gradually, low threshold buffer level increase it slowly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.168-171
• /
• 2002

In this study. a solid-state laser system adopting a sequential discharge method in which three flashlamps are turned on sequently was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on three flashlamps sequently with the aid of a PIC one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from a to lamp and the real-time control is possible with an external keyboard, enabling various pulse shapes. In addition, longer pulses can be more widely used for industrial processing and lots of medical purposes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.10
• /
• pp.1347-1353
• /
• 2014

This paper researches a modeling and experiment of 50kW diesel generator in grid-connected mode. The output of diesel generator can be calculated by the phase difference between voltage and current as well as the diesel generator parameter such as mutual impedance, field current and rotor angle. Considering the different d-q frame impedance, the output of diesel generator is analyzed for equation and verified by simulation. The diesel generator modeled by considering the time delay for actuator, diesel engine and exciter. The controller of diesel generator is divided into governor and exciter. The governor consists of speed controller and active power controller, where speed controller maintains frequency as 60Hz and active power tracks active power reference. On the other hand, the exciter consists of voltage controller and reactive power controller, where voltage controller controls $380V_{LL}$ and reactive power is controlled as zero. When the active power reference is changed as 0.1pu in the grid connected mode, the active power takes 10 seconds to reach the steady state and the reactive power is maintains as zero. The 50kW diesel generator is tested and experiment results are well matched with the simulation results.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1447-1453
• /
• 2014

This paper proposes the new method based on the availability of three points measurement and convexity of photovoltaic (PV) curve characteristic at the maximum power point (MPP). In general, the MPP tracking (MPPT) function is the important part of all PV systems due to their power-voltage (P-V) characteristics related with weather conditions. Then, the analog-to-digital converter (ADC) and low pass filter (LPF) are required to measure the voltage and current for MPPT by the digital controller, which is used to implement the PV power conditioning system (PCS). The measurement and quantization error due to rounding or truncation in ADC and the delay of LPF might degrade the reliability of MPPT. To overcome this limitation, the proposed method is proposed while improving the performances in both steady-state and dynamic responses based on the detailed investigation of its properties for availability and convexity. The performances of proposed method are evaluated with the several case studies by the PSCAD/EMTDC$^{(R)}$ simulation. Then, the experimental results are given to verify its feasibility in real-time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.310-323
• /
• 2004

In this paper, we extend the multiple time scale control framework to window-based congestion control, in particular, TCP This is performed by interfacing TCP with a large tine scale control nodule which adjusts the aggressiveness of bandwidth consumption behavior exhibited by TCP as a function of "large time scale" network state. i.e., conformation that exceeds the horizon of the feedback loop as determined by RTT Our contribution is threefold. First, we define a modular extension of TCP-a function call with a simple interface-that applies to various flavors of TCP-e.g., Tahoe, Reno, Vegas and show that it significantly improves performance. Second, we show that multiple time scale TCP endows the underlying feedback control with preactivity by bridging the uncertainty gap associated with reactive controls which is exacerbated by the high delay-bandwidth product in broadband wide area networks. Third, we investigate the influence of three traffic control dimensions-tracking ability, connection duration, and fairness-on performance. Performance evaluation of multiple time scale TCP is facilitated by a simulation bench-mark environment which is based on physical modeling of self-similar traffic.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.384-387
• /
• 2003

In this paper, we have designed the integrated wire and wireless P2P framework using mobile agents to share efficiently resources as media file. Most of the P2P applications are used on the wire network. We propose the integrated wire and wireless P2P framework. Proposed P2P platform is based on JXTA of Sun Microsystems. But JXTA is pure peer-to-peer network model, so it sends message other peers as broadcast style to request resources. In this way, there are some problems as massage overload, bandwidth loss, etc. In order to solve this problem, we propose a hybrid peer-to-peer network model using mobile agent. Proposed scheme also solve existing hybrid pEp model's flaws which have the delay and low rate due to concentrated server. In proposed scheme, mobile agents that have autonomy and mobility are used to search the location of resources. Besides, mobile agents could solve the loss problem of the search result. To improve P2P QoS(Quality of Service), we could monitor peer's state information using PIP(Peer Information Protocol) of JXTA.