• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.81-90
• /
• 2004

유한상태기의 상태할당은 이로부터 구현되는 순차회로의 속도, 면적, 테스팅 및 소비전력에 큰 영향을 미친다. 본 논문에서는 상태변수 그룹들 사이에 상호 의존성(dependency)을 최소화하여 테스팅 및 전력소모를 개선하기 위한 m-블록 분할을 이용한 새로운 상태할당 기술을 소개한다. m-블록 분할 알고리즘에 의해 상태도로부터 상태들을 그룹으로 나누어 상태변수의 상호의존성을 줄이고, 상태천이 확률에 의해 결정된 무게인자에 따라 상태간 상태변수의 변화를 최소로하는 코드를 할당하여 상태천이시 스위칭 횟수를 줄인다. 상태변수 의존성을 줄임으로써 순차회로 사이클이 줄어들어서 부분스캔 및 테스트 생성이 용이하게 되고, 상태변수간의 스위칭 횟수를 줄임으로써 소비전력이 줄어들게 든다. 즉, 본 상태할당 기술은 서로 상반 관계에 있는 테스팅과 저전력 문제를 동시에 해결할 수 있는 새로운 기술이다. 벤치마크 회로에 대한 실험결과 기존의 방법보다 고장점검도 및 소비전력이 현저히 개선되었음을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.77-81
• /
• 2020

Resistive RAM (ReRAM)은 전이금속 산화물의 저항변화 특성을 이용하는 차세대 비휘발 메모리로 전이금속산화물 내의 산소공공의 재분포를 통한 저항변화 특성을 이용한다. 따라서 저항변화 특성을 위해 전이금속산화물 내에는 일정량 이상의 산소공공이 요구되며 이를 위해서는 박막 형성 공정에서 산화 수를 조절할 수 있는 공정이 필요하다. 본 연구에서는 직접패턴이 가능한 photochemical metal organic deposition (PMOD) 공정을 사용하여 UV 노출에 의해 photochemical metal organic precursor의 ligand가 분해되는 과정에서 전기장을 인가하여 박막내의 산화 수를 조절하는 실험을 진행하였다. Electric field assisted PMOD (EFAPMOD) 법을 이용하여 FeOx 박막의 산화 수 조절이 가능함을 x-ray photoelectron spectroscopy (XPS) 분석과 I-V 측정을 통하여 확인하였으며, EFAPMOD 공정 중 인가하는 전압의 크기를 조절하여 박막의 산화 수를 조절할 수 있음을 확인하였다. 따라서 EFAPMOD 공정 중 인가전압의 크기를 이용하여 저항변화 특성에 적합한 적정한 산화수를 가지는 금속산화물 박막을 얻고 그 저항변화 특성을 조정할 수 있음을 확인하였다.

• Journal of Electrochemical Science and Technology
• /
• 제15권3호
• /
• pp.405-413
• /
• 2024

Several techniques for determining the reverse peak current from a cyclic voltammogram (CV) for a reversible system are described in the literature: CV itself as a baseline with long switching potential (E_λ) that serves as a baseline for other CVs, Nicholson equation that uses CV parameters to calculation reverse peak current and linear extrapolation of the current obtained at the switching potential. All methods either present experimental difficulties or large errors in the peak current determination. The paper demonstrates, both theoretically and experimentally, that trapezoidal cyclic voltammetry (TCV) can be used as a baseline to determine anodic peak current (i_ap) with high accuracy and with a switching potential shorter than that used by CV, as long as E_λ is at least 130 mV away from the cathodic peak. Beyond this value of switching potential the electroactive specie is completely depleted from the electrode surface. Using TCV with E_λ = 0.34 V and a switching time (t_λ) of 240 s as a baseline, the determination of the reverse peak current presents a deviation from the expected value of less than 1% for most of the CVs studied (except cases when E_λ is close to the direct potential peak). This result presents better accuracy than the Nicholson equation and the linear extrapolation of the current measured at the switching potential, in addition to presenting a smaller error than that obtained in the acquisition of the experimental current. Furthermore, determining the reverse peak current by extrapolating the linear fit of i_ap vs. ${\sqrt[1/]{t_{\lambda}}}$ to infinite time gave a reasonable approximation to the expected value. Experiments with aqueous potassium hexacyanoferrate (II) and ferrocene in acetonitrile confirmed the theoretical predictions.

• 한국정밀공학회지
• /
• 제6권2호
• /
• pp.30-39
• /
• 1989

Variable structure control (VSC) systems control the state vectors using sliding regime (SR) constructed switching logic, switching plane and control law. Saturation function switching logic is used to improve the drawback which occurs in traditional sign function switching logic. Switching plane with time-varying parameter is proposed to improve the drawback which occurs in switching plane with constant parameter and it is suggested the control law which has time-varying parameter. The stability of VSC system controlled by proposed time-varying SR is discussed, and the good control behavior was shown through computer simulation using proposed SR.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.21-26
• /
• 2018

In this paper, the switching characteristics of the active clamp type flyback converter, which is deemed suitable for the miniaturization of the external power supply for home appliance, were analyzed and the process of reducing the switching loss was explained. The active clamp type flyback converter operating in the DCM has confirmed that the surge voltage of the main switch does not occur and the turn-off / on loss of the switch do not occur in principle. Also, in the case of the switch for synchronous rectifier, it was showed that the switch current showed half-wave rectified sinusoidal characteristic, and the switching loss was reduced. The switching characteristics of the experimental results gathered from 120 W class prototype were compared with the theoretical waveform in the steady-state and it was confirmed that the power conversion efficiency of the active clamp type flyback converter was maintained high due to the reduction of the switching loss.

• Journal of Communications and Networks
• /
• 제17권2호
• /
• pp.126-132
• /
• 2015

In mobile computing research area, it is highly desirable to understand the characteristics of user movement so that the user friendly location aware services could be rendered effectively. Location based social networks (LBSNs) have flourished recently and are of great potential for movement behavior exploration and datadriven application design. While there have been some efforts on user check-in movement behavior in LBSNs, they lack comprehensive analysis of social influence on them. To this end, the social-spatial influence and social-temporal influence are analyzed synthetically in this paper based on the related information exposed in LBSNs. The check-in movement behaviors of users are found to be affected by their social friendships both from spatial and temporal dimensions. Furthermore, a probabilistic model of user mobile behavior is proposed, incorporating the comprehensive social influence model with extent personal preference model. The experimental results validate that our proposed model can improve prediction accuracy compared to the state-of-the-art social historical model considering temporal information (SHM+T), which mainly studies the temporal cyclic patterns and uses them to model user mobility, while being with affordable complexity.

• Earthquakes and Structures
• /
• 제16권3호
• /
• pp.349-358
• /
• 2019

Long span cable-stayed bridges are extremely vulnerable to dynamic excitations such as which caused by traffic load, wind and earthquake. Studies on cable-stayed bridge vibration control have been keenly interested by researchers and engineers in design new bridges and assessing in-service bridges. In this paper, a novel Hybrid-Tuned Mass Damper (H-TMD) is proposed and a hybrid control model named Mixed Logic Dynamic (MLD) is employed to build the bridge-H-TMD system to mitigate the vibrations. Firstly, the fundamental theory and modeling process of MLD model is introduced. After that, a new state switching design of the H-TMD and state space equations for different states are proposed to control the bridge vibrations. As the state switching designation presented, the H-TMDs can applied active force to bridge only if the structural responses are beyond the limited thresholds, otherwise, the vibrations can be reduced by passive components of dampers without active control forces provided. A new MLD model including both passive and active control states is built based on the MLD model theory and the state switching design of H-TMD. Then, the case study is presented to demonstrate the proposed methodology. In the case study, the control scheme with H-TMDs is applied for a long span cable-stayed bridge, and the MLD model is established and simulated with earthquake excitation. The simulation results reveal that the suggested method has a well damping effect and the established system can be switched between different control states as design excellently. Finally, the energy consumptions of H-TMD schemes are compared with that of Active Tuned Mass Damper (ATMD) schemes under variable seismic wave excitations. The compared results show that the proposed H-TMD can save energy than ATMD.

• 한국재료학회지
• /
• 제25권9호
• /
• pp.429-434
• /
• 2015

Resistance switching memory cells were fabricated using atomically dispersed Pt-$SiO_2$ thin film prepared via RF co-sputtering. The memory cell can switch between a low-resistance-state and a high-resistance-state reversibly and reproducibly through applying alternate voltage polarities. Percolated conducting paths are the origin of the low-resistance-state, while trapping electrons in the negative U-center in the Pt-$SiO_2$ interface cause the high-resistance-state. Intermediate resistance-states are obtained through controlling the compliance current, which can be applied to multi-level operation for high memory density. It is found that the resistance value is related to the capacitance of the memory cell: a 265-fold increase in resistance induces a 2.68-fold increase in capacitance. The exponential growth model of the conducting paths can explain the quantitative relationship of resistance-capacitance. The model states that the conducting path generated in the early stage requires a larger area than that generated in the last stage, which results in a larger decrease in the capacitance.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1332-1342
• /
• 2014

This paper proposes a novel test circuit for SiC transistors. On-state resistance under practical application conditions is an important characteristic for the device reliability and conduction efficiency of SiC transistors. In order to measure the on-state resistance in practical applications, high voltage is needed, and high current is also necessary to ignite performance for the devices. A soft-switching circuit based on synchronous buck topology is developed in this paper. To provide high-voltage and high-current stresses for the devices without additional spikes and oscillations, a resonant circuit has been introduced. Using the novel circuit technology, soft-switching can be successfully realized for all the switches. Furthermore, in order to achieve accurate measurement of on-state resistance under switching operations, an active clamp circuit is employed. Operation principle and design analysis of the circuit are discussed. The dynamic measurement method is illustrated in detail. Simulation and experiments were carried out to verify the feasibility of the circuit. A special test circuit has been developed and built. Experimental results confirm that the proposed circuit gives a good insight of the devices performance in real applications.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1058-1069
• /
• 2013

This paper proposes and designs a new output filter called an LCFL filter for application to three phase three wire shunt active power filters (SAPF). This LCFL filter is derived from a traditional LCL filter by replacing its capacitor with a C-type filter, and then constructing an L-C-type Filter-L (LCFL) topology. The LCFL filter can provide better switching ripple attenuation capability than traditional passive damped LCL filters. The LC branch series resonant frequency of the LCFL filter is set at the switching frequency, which can bypass most of the switching harmonic current generated by a SAPF converter. As a result, the power losses in the damping resistor of the LCFL filter can be reduced when compared to traditional passive damped LCL filters. The principle and parameter design of the LCFL filter are presented in this paper, as well as a comparison to traditional passive damped LCL filters. Simulation and experimental results are presented to validate the theoretical analyses and effectiveness of the LCFL filter.