• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.12
• /
• pp.1718-1734
• /
• 2009

The aim of this review is to address some characteristics that influence meat quality. Genetic groups, nutrition, finishing systems and gender are the major factors that change carcass characteristics, chemical composition and fatty acid profile. Genetic groups that have zebu genes in their composition show higher hot carcass dressing than genetic groups without zebu genes. Genetic groups that have European breeds in their composition have higher marbling scores. On the other hand, genetic groups that have zebu breeds show low marbling scores. Bulls finished in feedlots present higher final weight than steers, cull cows and heifers. Fat thickness is one of the principal parameters that are affected by different gender. Cull cows (4.72 mm) and heifers (4.00 mm) present higher values than bulls (1.75 mm) and steers (2.81 mm). The major effects observed by different systems of termination are fat thickness and marbling. Crude protein presents variation due to nutrition. Nutrition influences variation of fatty acid profile. Genetic groups also influence fatty acid profile. Genetic groups that have zebu genes in their composition show high percentage of PUFA. The major class of fatty acids that is changed with nutrition is PUFA. The better ratios of PUFA/SFA and n-6/n-3 are found in Longissimus muscle of animals finished in pasture systems.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• Journal of Korean Academy of Nursing
• /
• v.12 no.2
• /
• pp.1-26
• /
• 1982

The main purpose of this study was to test the effect of the structured information on the sleep amount of the patients undergoing open heart surgery. This study has specifically addressed to the Following two basic research questions: (1) Would the structed in formation influence in the reduction of sleep disturbance related to anxiety and Physical stress before and after the operation? and (2) that would be the effects of the structured information on the level of preoperative state anxiety, the hormonal change, and the degree of behavioral change in the patients undergoing an open heart surgery? A Quasi-experimental research was designed to answer these questions with one experimental group and one control group. Subjects in both groups were matched as closely as possible to avoid the effect of the differences inherent to the group characteristics, Baseline data were also. collected on both groups for 7 days prior to the experiment and found that subjects in both groups had comparable sleep patterns, trait anxiety, hormonal levels and behavioral level. A structured information as an experimental input was given to the subjects in the experimental group only. Data were collected and compared between the experimental group and the control group on the sleep amount of the consecutive pre and post operative days, on preoperative state anxiety level, and on hormonal and behavioral changes. To test the effectiveness of the structured information, two main hypotheses and three sub-hypotheses were formulated as follows; Main hypothesis 1: Experimental group which received structured information will have more sleep amount than control group without structured information in the night before the open heart surgery. Main hypothesis 2: Experimental group with structured information will have more sleep, amount than control group without structured information during the week following the open heart surgery Sub-hypothesis 1: Experimental group with structured information will be lower in the level of State anxiety than control group without structured information in the night before the open heart surgery. Sub-hypothesis 2 : Experimental group with structured information will have lower hormonal level than control group without stuctured information on the 5th day after the open heart surgery Sub-hypothesis 3: Experimental group with structured information will be lower in the behavioral change level than control group without structured information during the week after the open heart surgery. The research was conducted in a national university hospital in Seoul, Korea. The 53 Subjects who participated in the study were systematically divided into experimental group and control group which was decided by random sampling method. Among 53 subjects, 26 were placed in the experimental group and 27 in the control group. Instruments; (1) Structed information: Structured information as an independent variable was constructed by the researcher on the basis of Roy's adaptation model consisting of physiologic needs, self-concept, role function and interdependence needs as related to the sleep and of operational procedures. (2) Sleep amount measure: Sleep amount as main dependent variable was measured by trained nurses through observation on the basis of the established criteria, such as closed or open eyes, regular or irregular respiration, body movement, posture, responses to the light and question, facial expressions and self report after sleep. (3) State anxiety measure: State Anxiety as a sub-dependent variable was measured by Spi-elberger's STAI Anxiety scale, (4) Hormornal change measure: Hormone as a sub-dependent variable was measured by the cortisol level in plasma. (5) Behavior change measure: Behavior as a sub-dependent variable was measured by the Behavior and Mood Rating Scale by Wyatt. The data were collected over a period of four months, from June to October 1981, after the pretest period of two months. For the analysis of the data and test for the hypotheses, the t-test with mean differences and analysis of covariance was used. The result of the test for instruments show as follows: (1) STAI measurement for trait and state anxiety as analyzed by Cronbachs alpha coefficient analysis for item analysis and reliability showed the reliability level at r= .90 r= .91 respectively. (2) Behavior and Mood Rating Scale measurement was analyzed by means of Principal Component Analysis technique. Seven factors retained were anger, anxiety, hyperactivity, depression, bizarre behavior, suspicious behavior and emotional withdrawal. Cumulative percentage of each factor was 71.3%. The result of the test for hypotheses show as follows; (1) Main hypothesis, was not supported. The experimental group has 282 minutes of sleep as compared to the 255 minutes of sleep by the control group. Thus the sleep amount was higher in experimental group than in control group, however, the difference was not statistically significant at .05 level. (2) Main hypothesis 2 was not supported. The mean sleep amount of the experimental group and control group were 297 minutes and 278 minutes respectively Therefore, the experimental group had more sleep amount as compared to the control group, however, the difference was not statistically significant at .05 level. Thus, the main hypothesis 2 was not supported. (3) Sub-hypothesis 1 was not supported. The mean state anxiety of the experimental group and control group were 42.3, 43.9 in scores. Thus, the experimental group had slightly lower state anxiety level than control group, howe-ver, the difference was not statistically significant at .05 level. (4) Sub-hypothesis 2 was not supported. . The mean hormonal level of the experimental group and control group were 338 ㎍ and 440 ㎍ respectively. Thus, the experimental group showed decreased hormonal level than the control group, however, the difference was not statistically significant at .05 level. (5) Sub-hypothesis 3 was supported. The mean behavioral level of the experimental group and control group were 29.60 and 32.00 respectively in score. Thus, the experimental group showed lower behavioral change level than the control group. The difference was statistically significant at .05 level. In summary, the structured information did not influence the sleep amount, state anxiety or hormonal level of the subjects undergoing an open heart surgery at a statistically significant level, however, it showed a definite trends in their relationships, not least to mention its significant effect shown on behavioral change level. It can further be speculated that a great degree of individual differences in the variables such as sleep amount, state anxiety and fluctuation in hormonal level may partly be responsible for the statistical insensitivity to the experimentation.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.41
• /
• pp.88-101
• /
• 2007

Recently, the condensation of walls often occurring in domestic high-rise apartment buildings is an important problem. The main purpose of this study is to develop the prediction method for the surface condensation on curtain wall in high-rise apartment buildings. Therefore, in this study, we first analyzed exterior climate factors through the analysis of the Seoul climate data and predicted the change of indoor temperature by using Apache program to find the cause of the condensation state and to prevent condensation. Also, according to this result, exterior climate factors and interior factors, which caused the condensation, was examined. The thermal performance of the curtain wall and the range of potential condensation were analyzed to focus on high-rise apartment buildings through computer simulation programs. The results are as $follows;^1$) The frame edge of curtain wall has a higher U-value than in the center by $30%^2$) Because of stack effect, the rooms on the higher floor have a lower external ventilation rate resulting to a higher relative humidity3) Installing a ventilation system($20m^3$/h. person) makes it possible to have a higher external ventilation rate, resulting to a lower relative humidity.

• Transactions of Materials Processing
• /
• v.1 no.1
• /
• pp.66-74
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created in extrusion or drawing processes. The process factors which affect the generation of defects are semi-angle of die, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the possibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of round holes with process conditions such as semi-angle of die, reduction ratio of cross-sectional area and friction factor at the non-steady state of axisymmetrical extrusion process when the round hole is already existed inside the original billet. Also, the effects of process factors are investigated to prevent the possible defects.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.7
• /
• pp.295-302
• /
• 2021

In the context of economic growth, the banking system has greatly contributed to a substantial rise in living conditions, connecting savings and investment, and economic growth. Since economic reform in 1986, Vietnam's banking system has increasingly expanded in quality and quantity of banks including state-owned, private-owned, and foreign banks. The aim of this study is to evaluate the main factors affecting employee's performance in the banking system in the case of an emerging economy of Vietnam. Using the pilot study by investigating three experts in a few banks in order to correct the questionnaires, and a mega sample data of 170 observations conducted from bank's staffs, and managers in Hanoi capital of Vietnam, empirical results demonstrate that the independent variables included in the model can explain 67% of the change of the dependent variable of employee's performance, and the rest (31%) can be explained by other reasons. Further, motivation (MO), and working ability (WA) have a positive and insignificant impact on employee's performance, reflecting that motivation, and working ability have insignificantly affected employee's performance. In contrast, four factors, namely, welfare, working environment, cooperation, and education have a positive and significant impact on employee's performance in the case of Hanoi, Vietnam.

• Geomechanics and Engineering
• /
• v.28 no.2
• /
• pp.181-195
• /
• 2022

Roughness and joint inclination angle are the important factors that affect the strength and deformation characteristics of jointed rock mass. In this paper, 3D printer has been employed to make molds firstly, and casting the jointed specimens with different joint roughness coefficient (JRC), and different joint inclination angle (α). Conventional triaxial compression tests were carried out on the jointed specimens, and the influence of JRC on the strength and deformation parameters was analyzed. At the same time, acoustic emission (AE) testing system has been adopted to reveal the AE characteristic of the jointed specimens in the process of triaxial compression. Finally, the morphological of the joint surface was observed by digital three-dimensional video microscopy system, and the relationship between the peak strength and JRC under different confining pressures has been discussed. The results indicate that the existence of joint results in a significant reduction in the strength of the joint specimen, JRC also has great influence on the morphology, quantity and spatial distribution characteristics of cracks. With the increase of JRC, the triaxial compressive strength increase, and the specimen will change from brittle failure to ductile failure.

• Knowledge Management Research
• /
• v.17 no.3
• /
• pp.93-116
• /
• 2016

Knowledge, as a source of firm's competitive edges, has been drawing attention, while numerous enterprises are investing huge amount of assets to foster the right environments for executing knowledge management (KM). As a practical way of such KM, knowledge management systems (KMS) support the creation, diffusion, and utilization of knowledge, which are the tools for practicing such management style. Recently, the customer centers which make the closest contact with the customers are being concerned about the establishment of KMS. Considering the characteristics of real-time problem solving in customer centers during the consultation with the customers, the importance of KMS is paramount to the centers. This study analyzes major factors influencing the success and utilization of the customer center KMS's reestablishment, as an exploratory case study of the reestablishment of KMS in the customer center of K insurance company. First, the characteristic differences between the customer center's KMS and the traditional KMS are discussed, and the triangulation technique is applied to secure objectivity of this case study's findings. Major results of the case study state that, for the success of KMS and improvement of utilization, the followings should be considered preferentially: excellent system quality (accessibility, user convenience, easy searching, speed/menus); high information quality (accuracy, usefulness, timeliness, task-relevance, diversity, degree of specification); appropriate operation strategy and process for the utilization of system (education, training opportunity, appropriate personnel, speed and procedure of approval, compensation/evaluation); and change management via the support from the CEO's level (concern and participation of CEO, will to propel the project, investment, advertisement, etc.). This study provides practical suggestions with respect to factors which should be more carefully dealt with, since still many customer centers have hard time establishing and operating KMS due to lack of previous studies.

• 재활복지
• /
• v.18 no.4
• /
• pp.221-235
• /
• 2014

Recently, the frequency of stroke disease is increased due to the rapid aging population, and is contributed to the major occurrence factors of the posteriori acquired disability. This study is about an postural change device for the control of supine posture which is an assisted equipment using in daily rehabilitation process for overcoming the disability by the aftereffects of the stoke disease. In this paper, the existing domestic and Japan postural appliances is examined and its comparison and categorization is performed according to its functions and purposes. Here, in order to control the supine posture state, the design method for advanced multi functional system is proposed, which is devised to have an unified mattress control operations of combining the bedsore prevention tube with the supine posture tilting tube. And also, in addition of an smart function, it is designed to enable to perform an RF functions such as the monitoring of the present device state, the alteration of the basic position and the control of alternative floating and supine posture. This system control hardware consists of three main parts : the sensor detection part, the motor driving /control part, and the system control part for bluetooth communication. In results, we confirmed that the system designed by this research is possible to make it practical as an advanced smart postural change device combined by IoT technology in the application field of the recent IT technology.

• Korean Journal of Oriental Medicine
• /
• v.5 no.1
• /
• pp.133-139
• /
• 1999

Korean Oriental Medicine has experienced a dramatic status change since the 19th century. Korean Oriental Medicine had been the only authentic medicine, but lost its status and fell as an illegal medicine through the Japanese rule, and recently revived successfully. The dramatic change of Korean Oriental Medicine needs an explanation. This paper explored the cause of the dramatic change and found the following things. First, the medical policy of the State directly influenced to the status of Korean Oriental Medicine. During the Japanese rule, the medical policy for Korean Oriental Medicine was very oppressive. After Liberation, a kind of noninterference policy was carried out. The change of the medical policy gave direct influence to the status of Korean Oriental Medicine. Second, the needs for medical service have been expanded. At the same time, the concern for tradition has been increased. And the supply of Korean Oriental Medicine has also increased by the establishments of Korean Oriental Medicine departments. Third, the internal growth of Korean Oriental Medicine brought to elevating the status of Korean Oriental Medicine. After 1945, Korean Oriental Medicine endeavored to strengthen the organization and to activate the academic society. Based on the above factors, Korean Oriental Medicine has achieved a remarkable status change during last several decades. We can not skip Korean Oriental Medical doctors' desperate efforts to enhance the status of Korean Oriental Medicine. Korean Oriental Medicine achieved the modernization. It's difficult to find similar case. It can be a model of modernization of tradition.