• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1043-1044
• /
• 2007

The line-start permanent magnet synchronous motor has a high efficiency and an advantage in constant speed operation regardless of the effect of load variation. However it is difficult to predict the performance of characteristics accurately, because of the unbalanced starting torque with the initial starting position of the rotor and the generation of a break torque. In this paper the dynamic characteristics of the line-start permanent magnet synchronous motor are described and compared with those of the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bars in the line-start permanent magnet synchronous motor. Finally this paper gives the comparison between the simulation results and the experiment results.

• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.241-247
• /
• 2011

This paper is intended to improve efficiency of two-phase BLDC motor using analytical and statistical methods, and then the stability of the starting for the designed model is investigated. The characteristics of the motor according to magnetization directions of permanent magnet are analyzed through the analytical method, and design variables that affect the efficiency are selected. Preliminary optimal design is performed using the analytical method with the design variable. The RSM (Response Surface Method) based on the FEA (Finite Element Analysis) is applied to complement errors of the analytical method. As a result, the optimal design is determined. Finally, the stability of the starting for the optimal designed model is evaluated by analyzing cogging torque, and it is verified through the FEA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.59-61
• /
• 2006

The single phase switched reluctance motor(SRM) is simpler in control circuit because the number of switching devices is fewer than the poly phase SRM. The energy density per unit volume is very big because all stator poles are excited simultaneously by a single switching power source. But it must be provided a starting device on account of not being generated the starting torque at specific rotor positions. And also it has some demerits that have a torque ripple, noise and vibration because of being excited by switching pulse power source. Therefore, to make up for these demerits, it is realized many studies for the structure design used by computer and the operating methods by power electronics technique. In this paper, we'll present the comparison of the single phase SRM with the various rotor pole face types, as like stepped rotor pole face type and general rotor pole face type. For the torque characteristics analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.865-866
• /
• 2006

Bearingless Switched Reluctance Motor(SRM) have combined characteristics of SRM and magnetic bearing. Production of radial force for rotor shaft magnetic suspension is explained with differential stator windings. Bearingless SRM is simple structurally because the permanent magnet does not exist and bearing does not take the influence at the environment because it does not exist and has strong torque, and loss of bearing by bearing current has the advantage not to exist. In this paper, a design method of bearingless SRM for suspension power and starting torque is proposed. The design model is implement by maxwell.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.849-851
• /
• 2001

This paper presents experimental method of parameter measurement and starting characteristics of 3 phase induction motor. Equivalent circuit parameters measured by DC test, the blocked rotor test, and no load test were used as the input data for computer simulation. Starting characteristics, such as starting current and torque were analyzed through computer simulation by Matlab, and the simulation results were compared with experiment using strain gauge attached on motor shaft. We conform that experimental results are very similar to that of simulation.

• 한국정보전자통신기술학회논문지
• /
• 제10권3호
• /
• pp.206-212
• /
• 2017

본 논문은 대용량 유도전동기의 기동특성을 분석하였다. 유도전동기 토크는 전류와 자속의 곱으로서 이 자속을 발생시키기 위해서는 여자전류에 해당되는 무효전력이 필요하다. 유도전동기에 필요한 무효전력을 공급하는 방법으로 역률 보상장치를 사용하여 전원측을 대신하여 공급하는 방법을 많이 사용하는데, 역률 보상장치를 사용할 경우 피상전력을 줄일 수 있어 역률을 향상시킬 수 있다. 역률을 개선하기 위한 보상장치를 설치하는 방법으로 부하마다 설치하는 경우와 전체를 일괄 보상하는 방법으로 고압 대용량의 부하로서 일정한 운전패턴을 가지고 있는 경우에는 주로 개별보상이 주로 사용된다. 일반적으로 대용량 유도전동기는 기동 보호장치를 이용하지만 이 논문은 전전압 기동시의 특성을 분석하는 가상의 상황을 가정하여 기동특성에 대한 이론과 실제의 운전특성을 측정 분석하고 역률개선 콘덴서를 이용하여 기동특성을 개선해 보았다.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.115-121
• /
• 2005

Micromachines are extremely novel artifacts with a variety of special characteristics. Utilizing their tiny dimensions ranging roughly from 10 to $10^3$ micro-meters, the micromachines can perform tasks in a revolutionary manner that would be impossible for conventional artifacts. Micromachines are in general related to various coupled physical phenomena. They are required to be evaluated and designed considering the coupled phenomena. This paper describes finite element analysis (FEA) simulation of practical behaviors for the micro actuator. Especially, electric field modeling in micro actuators has been generally restricted to in-plane two-dimensional finite element analysis because of the complexity of the micro actuator geometry. However, in this paper, the actual three-dimensional geometry of the micro actuator is considered. The starting torque obtained from the in-plane two-dimensional analytical solutions were compared with that of the actual three-dimensional FE analysis results. The starting torque is proportional to $V^2$, and that the two-dimensional analytical solutions are larger than the three- dimensional FE ones. It is found that the evaluation of micro actuator has to be considered electrical leakage phenomenon.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1045-1048
• /
• 2002

Micromachines are extremely novel artifacts with a variety of special characteristics. Utilizing their tiny dimensions ranging roughly from 10 to $1O^3$ micro-meters, the micromachines can perform tasks in a revolutionary manner that would be impossible for conventional artifacts. Micromachines are in general related to various coupled physical phenomena. They are required to be evaluated and designed considering the coupled phenomena. This paper describes finite element analysis (FEA) simulation of practical behaviors for the micro actuator. Especially, electric field modeling in micro actuators has been generally restricted to in-plane two-dimensional finite element analysis because of the complexity of the micro actuator geometry. However, in this thesis, the actual three-dimensional geometry of the micro actuator is considered. The starting torque obtained from the in-plane two-dimensional analytical solutions were compared with that of the actual three-dimensional FE analysis results. The starting torque is proportional to $V^2$, and that the two-dimensional analytical solutions are larger than the three-dimensional FE ones. It is found that the evaluation of micro actuator has to be considered electrical leakage phenomenon.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권3호
• /
• pp.131-137
• /
• 2006

This paper deals with the conductor bar design to improve starting stability of line start synchronous reluctance motor(LSSynRM). As design variables, the number and the shape of conductor bars of rotor are chosen. The starting characteristics are calculated by finite element method(FEM) and the conductor bars are designed to improve the starting torque according to the initial starting rotor position. Finally, the starting characteristic of the designed model are compared with that of the initial model.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.220-224
• /
• 2004

The present paper deals with the numerical study to analyze the self-starting performance of impulse turbine in a reciprocating air flow generated by sinusoidal motion of wave inside oscillating water column. Result was compared to that of Wells turbine, well-known wave energy conversion device, and showed that the impulse turbine has a superior self-starting ability. More detailed parametric study was performed to demonstrate the effects of moment of inertia of rotor, loading torque, tip clearance and angle of guide vane.