• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.847-852
• /
• 2001

A thorough understanding of the transient behavior during load following and start-up is essential in the design and operation of an heat recovery steam generator(HRSG). During this period of time, material that is exposed to high temperature and experiences a large temperature variation is subject to high thermal stress. APESS(Advanced Plant Engineering & Simulation System) is a dynamic simulation software for power plant which is under being developed by Doosan Heavy Industries & Construction Co., Ltd. This paper present the introduction of APESS and the result of simulation for an heat recovery steam generator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.146-151
• /
• 1992

A two-compartment four-cell model is developed for the adiabatic autoclave slim type reactor for free radical polymerization of low density polyethylene(LDPE). The mass and energy balances give rise to a set of ordinary differential equations, and by analyzing the system it is possible to predict properly not only the reactor performance but also the properties of polymer product. The steady state multiplicity is found to exist and examined by constructing the bifurcation diagram. The effects of various operation parameters on the reactor performance and polymer properties are investigated systematically to show that the temperature distribution plays the central role for the properties of polymer product. Therefore, it is essential to establish a good control strategy for the temperature in each compartment. In this study it is shown that the reactor system can be adoptively controlled by pole-placement algorithm with conventional PID controller. To accomplish a satisfactory control, the estimator and controller are initialized during the period of start-up.

• Journal of Korean Society on Water Environment
• /
• v.28 no.6
• /
• pp.781-785
• /
• 2012

This study was carried out to treat the thermal elutriated acids of piggery wastewater using UASB process. The UASB reactor was operated at an organic loading rate (OLR) of $7.4\;kgCOD/m^3-day$ (6.5 ~ 9.0). During the start-up period, the low COD removal efficiency (20%) was caused by shock loading and instability in the reactor. It was mainly due to the high concentration amounts of ammonia nitrogen, which caused inhibitory and toxic effects to toward the anaerobic bacteria. In steady state, the UASB reactor showed a SCOD removal efficiency of 71% and a VS removal efficiency of 39%. The gas production and methane content were 1.3 L/day $(0.21\;m^3\;CH^4/kg$ COD removed) and 77%, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.384-393
• /
• 1998

A mixed powder of electrolyte and matrix support materials with a proper proportion was used for the fabrication of an electrolyte matrix sheet. The purpose of this study is to reduce the large change in MCFC cell thickness occurring in the initial start-up period when separate sheets of electrolyte and support are used. A focus was put on how small the carbonate particles could be made. The particle size of the carbonate powder was controlled by ball milling and the distribution was measured using a particle size analyser. The thickness change was reduced to 20% by this approach, which could be compared to 27% observed in a conventional cell. The thickness changes of electrolyte matrix have linear relation sizes of carbonate powders.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.95-101
• /
• 2015

Purpose: During the start-up period, the response time of a hydraulic system increases in the winter because of the increased oil viscosity caused by the cold weather. The problems of delayed tractor starting and excessive wear of the clutch disk occur for these reasons. Therefore, this study develops an analysis model using the commercial hydraulic analysis program AMESim to examine the characteristics of delays in power shuttle starting at different oil temperatures. Methods: In the experiment, a tractor was stationary on a flat surface with the engine running at a constant speed of 1,080 rpm. The forward lever was then pressed to activate the power shuttle at three different oil temperatures, and the pressure changes were measured. The pressure on the forward clutch control valve was measured by a pressure gauge installed on the hydraulic line supplied to the transmission from the main valve. An analysis model was also developed and verified with actual tests. Results: The trend of the simulated pressures of the power shuttle is similar to that of the measured pressures, and a constant modulation period was observed in both the simulation and test results. However, the difference found between the simulation and test results was the initial pressure required to overcome the initial force of the clutch spring. Conclusions: This study also examines the characteristics of the delayed startup of the power shuttle at different oil temperatures through simulations.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.612-620
• /
• 2006

This paper proposes an optimal trajectory generation method for biped robots for walking up-and-down stairs using a Real-Coded Genetic Algorithm (RCGA). The RCGA is most effective in minimizing the total consumption energy of a multi-dof biped robot. Each joint angle trajectory is defined as a 4-th order polynomial of which the coefficients are chromosomes or design variables to approximate the walking gait. Constraints are divided into equalities and inequalities. First, equality constraints consist of initial conditions and repeatability conditions with respect to each joint angle and angular velocity at the start and end of a stride period. Next, inequality constraints include collision prevention conditions of a swing leg, singular prevention conditions, and stability conditions. The effectiveness of the proposed optimal trajectory is shown in computer simulations with a 6-dof biped robot model that consists of seven links in the sagittal plane. The optimal trajectory is more efficient than that generated by the Modified Gravity-Compensated Inverted Pendulum Mode (MGCIPM). And various trajectories generated by the proposed GA method are analyzed from the viewpoint of the consumption energy: walking on even ground, ascending stairs, and descending stairs.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.36 no.3
• /
• pp.91-105
• /
• 2011

In this paper, we analyze a logistic system involving a supplier who produces and delivers multiple types of items and a buyer who receives and sells the products to end customers. The buyer controls the inventory level by replenishing each product item up to a given order-up-to-level to cope with stochastic demand of end customers. In response to the buyer's order, the supplier produces or outsources the ordered item and delivers them at the start of each period. For the system described above, a mathematical model for a single type of item was developed from the buyer's perspective. Based on the model, an efficient method to find the cycle length and safety factor which correspond to a local minimum solution is proposed. This single product model was extended to cover a multiple item situation. From the model, algorithms to decide the base cycle length and order interval of each item were proposed. The results of the computational experiment show that the algorithms were able to determine the global optimum solution for all tested cases within a reasonable amount of time.

• Journal of Korean Academy of Nursing
• /
• v.52 no.2
• /
• pp.214-227
• /
• 2022

Purpose: This study was aimed at investigating the incidence and risk factors of dyslipidemia in menopausal women using a Korean community-based longitudinal study. Methods: The subjects were 245 postmenopausal women without dyslipidemia who had participated in the Ansan-Ansung cohort study from 2001~2002 (baseline) to 2015~2016 (seventh follow-up visit). The dyslipidemia incidence was measured as incidence proportion (%) and incidence rate per 100 person-years. The predictors of developing dyslipidemia were analyzed with Cox's proportional hazard model. Results: The incidence of new dyslipidemia during the follow-up period was 78.4% (192 patients), and 11.9 per 100 person-years. Mean duration from menopause to developing dyslipidemia was 5.3 years in new dyslipidemia cases. The triglyceride/high density lipoprotein (TG/HDL-C) ratio at baseline (hazard ratio = 2.20; 95% confidence interval = 1.39~3.48) was independently associated with developing dyslipidemia. Conclusion: Dyslipidemia occurs frequently in postmenopausal women, principally within five years after menopause. Therefore, steps must be taken to prevent dyslipidemia immediately after menopause, particularly in women with a high TG/HDL-C ratio at the start of menopause.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.93-110
• /
• 2022

The purpose of this study is to explore business investment and operation of O2O (Online-To-Offline) combined service. The study will analyze the necessary factors for growing the business by dividing the O2O service by industry. The Online-to-Offline is a method of inducing purchases of products and services by connecting between online and offline This research methodology organized the four stages of the analysis process. The analysis of all stages was performed with association rules in big data techniques. It is divided into the start-up period, growth period, maturity period, and decline period, and analysis is conducted on the business investment, expenditure cost, business operation, and conflict factors. As the research result, the first analysis has shown commonality with government subsidies, bank loans, and personal funds in all industries. The second analysis showed a lot of expenditure on labor costs of internal employees, marketing/sales, facility facilities, equipment, and equipment purchase costs. The third analysis showed difficulty in raising the investment resources necessary for business operations in all industries. The last analysis showed conflicts in the industry, businesses license, legal systems, and small business owners in all industries. This study contributed to the abundance and diversity of research methodologies in management information systems using association rules. In addition, the description of organizational development theory was updated while explaining the business investment and operation of O2O combined services. In practical implication, the O2O services include environmental factors that cause convergence between industries. Accordingly, this is required for new O2O services through new laws and systems and reorganization of existing laws and regulations.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.687-694
• /
• 2005

Lab-scale experiments have been carried out to investigate the effect of F/R ratio of ASBR (Anaerobic Sequencing Batch Reactor) process on the removal of the organic matters in ammonia stripped swine wastewater. Three ASBR inoculated with sludge mixed with granular sludge of UASB (Upflow Anaerobic Sludge Blanket) and anaerobic digested sludge of municipal wastewater treatment plant were operated. Ammonia stripped swine wastewater was used as influent. Prior to conducting the experiments with varied conditions, the effect of increasing organic loading rate from 2.34 to $5.79gTCOD_{Cr}/L$-day at a fixed F/R ratio of 0.1 on the organic removal efficiency has been studied during start-up period. As the result of the experiment, under the condition of varied organic loadings, less than $4.14gTCOD_{Cr}/L$-day, the removed efficiency $TCOD_{Cr}$ of the ASBR process is 83% resulted from the mean value of effluent $TCOD_{Cr}$, 9,125 mg/L during the start-up period. Then ASBRs were operated with F/R ratio of 0.024, 0.303 and 0.91 respectively. Organic loading rate was increased from 4.56 to $15.43gTCOD_{Cr}/L$-day to investigate the effects of F/R ratio and organic loading rate on the organic removal efficiency. As the result of the experiment, less than $6.23gTCOD_{Cr}/L$/L-day, F/R ratio haven't an effect on the organic removal efficiency and the mean removal efficiency of TSS, $TCOD_{Cr}$ and $SCOD_{Cr}$ was about 80%, 86% and 78% at the all of F/R ratio. But as organic loading rate was increased from 8.54 to $12.04gTCOD_{Cr}/L$-day at the F/R ratio of 0.024, the removal efficiency of $SCOD_{Cr}$ decreased from 71% to 63%. The range of decreased removal efficiency of $SCOD_{Cr}$ at the F/R ratio of 0.024 was much more higher than at the F/R ratio of 0.303, 0.91. Thus, as organic loading rate was increased, ASBRs were operated with high F/R ratio to obtain high removal efficiency.