• 천문학회보
• /
• 제42권1호
• /
• pp.27.1-27.1
• /
• 2017

There is a rich diversity of galaxy properties and we are starting to understand some of the drivers for differences between galaxies. Much progress has been has been made in the last decade, thanks in large part to massively multiplexed surveys using single fibres, but we still lack a complete picture of how galaxies are built. I will discuss how large-scale integral field surveys can address a number of the outstanding questions in the field, starting with the current SAMI Galaxy Survey, and then looking towards the Hector instrument that will carry out integral field surveys of order 50,000-100,000 galaxies. With SAMI we can start to address how mass and environment influence galaxy structure and history, and I will discuss examples such as the environmental quenching of star formation and the distribution of angular momentum. With larger samples afforded by Hector we can go beyond simply mass and environment, to separate galaxies based on their merger or accretion history, as well as their larger-scale environment.

• 산업기술연구
• /
• 제19권
• /
• pp.217-226
• /
• 1999

A single phase to three phase power converter with cost effective and simple structure is proposed. The converter consists of rectifier and inverter. The rectifier is composed of a half wave rectifier, a dc link capacitor, and a current limiting inductor, and the inverter is of only two switches with PWM control. For negative sequence operation the inverter output voltage leads the line input by $60^{\circ}$, and for positive sequence operation the inverter output voltage leads by $60^{\circ}$. We can see that positive sequence operation shows higher output voltage, slight harmonic distortion(2%), and better performances such as high efficiency and high power factor. A mathematical model for system analysis is provided, and specifications for selection and control scheme both for start-up and for steady state are analyzed. comparison and operational limits of positive and negative sequence operation are performed, and simulations and experiments are executed to verify the proposed.

• 전기학회논문지P
• /
• 제63권1호
• /
• pp.7-11
• /
• 2014

Induction motor is the most widely used to obtain the driving force in the industrial site. Induction motor is generally applied to the constant speed operation. Induction motor generates a high current at startup. So analysis for both steady state operation and start-up transient is required. In most cases, an equivalent circuit is used for the characteristics analysis of the induction motor. In this study, the two programs are applied to analyze for the rated speed as well as entire speed range. We confirmed that calculation results of the two programs are similar to each other.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.225-230
• /
• 2008

Reactor starting method has the advantage of simplicity and closed transition in spite of lower starting torque per kVA. This method allows a smooth start with almost no observable disturbance on transition and is suitable for applications such as centrifugal pumps or fans. Reactive power doesn't contribute to work but needs to sustain the electromagnetic field required for the induction motor to operate. Starting power factor of induction motor is specially lower than running power factor. Power factor application is needed to compensate for the lower power factor of induction motor. This power factor compensation systems is occasionally being hit by the effects of the starting reactor connection position at the starting, stopping of high-voltage induction motor. This paper describes voltage and current stress affected by the installation position of power factor compensation application at the reactor starting method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.619-620
• /
• 2008

Reactor starting method has the advantage of simplicity and closed transition in spite of lower starting torque per kVA. This method allows a smooth start with almost no observable disturbance on transition and is suitable for applications such as centrifugal pumps or fans. Starting power factor is specially low. Power factor application is needed to compensate for the lower power factor of induction motor. This power factor compensation systems is being hit by the effects of the starting reactor connection position. This paper describes voltage and current stress affected by the installation position of power factor compensation application at the reactor starting method.

• 한국실내디자인학회논문집
• /
• 제22호
• /
• pp.69-76
• /
• 2000

Contemporary architecture in Japan is entering an entirely new phase in the second half of the 1980s. In the late 1960s, doubts began to be expressed about Modernism, which until then had been the recognized mainstream of architecture. There was much discussion, but it was only in the early '80s that an active debate was initiated concerning Post-Modernism. Today, however, matters have gone beyond this, and the situation appears particularly significant. The Japanese architecture world was hitherto understand to be fundamentally very different from its western counterparts. There are several trends in current Japanese architecture which have still come out of the Japanese tradition of life, culture, region, climate itself. At the same time, stance of contemporary Japanese architecture start from a common basis in world's design stream which can be called Post-Modernism, Deconstructivism, Neo-Modernism. This study is aimed at analysis of 'Regional Characteristics' in Contemporary Japanese Architecture.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.194-196
• /
• 2008

이 논문에서는 연료전지용 3상 전류형 능동 클램프 DC/DC 컨버터의 기동 방법을 제안하고, 정상상태에서 컨버터의 출력 전압 및 입력 전류 제어기를 설계하였다. 3상 전류형 능동 클램프 DC/DC 컨버터는 가동시 클램프 전압과 출력 전압의 차로 인해 스위치 및 변압기 전선에 큰 단락 전류가 흐르는 단점이 있다. 그러므로 가동시 입력 인덕터에 2차 권선을 감아 플라이백방식을 이용하여 출력 전압을 확립시키는 방법을 제안하였다. 정상 상태에서 출력 전압 및 입력 전류 제어를 위해 두 개의 종속 연결 PI 제어기를 설계하였다. 전압 제어 이득의 시정수가 전류 제어 이득의 시정수보다 크게 함으로써 제어기의 안정도를 향상시켰다. 시뮬레이션을 통해 기동 방법을 확인하였다. 500w급 컨버터를 제작하였고, 실험을 통해 설계한 제어기의 성능을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.409-417
• /
• 2006

Polymer nanofibers can be generated by a electrospinning process. The process involves electrically charged jet of polymer solutions evolving from a droplet. The jet stretches in vertical direction due to the difference between charged particle and constant current located at the collector, while the Coulomb and viscoelastic forces start to contribute to radial and azimuthal (torsional) stretching. In this paper, the unstable dynamics of the liquid polymer jet is examined experimentally and theoretically. A complex viscoelastic rheological model has been adopted to analyze the behavior of a charged liquid jet. The model includes complex phenomena of stress relaxation of the liquid jet resulting from the competing force components. The experimental data of the jet paths captured by high-speed videocamera also confirm the similar behavior with the predictions.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.146-155
• /
• 2009

The static frequency converter (SFC) systems are used as a method of driving large synchronous machines in many power and industrial plants. In this paper, new control algorithms of SFC systems for starting gas turbo sets are proposed for a four quadrant operation: start-up at standstill; an acceleration up to the speed of the rated voltage; field weakening to reach the rated speed; synchronization to the main alternating current (AC) source; and dynamic braking to stop safely within the rating of the synchronous machine. Experimental results show that the proposed algorithms are proper and effective.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.507-515
• /
• 2013

This paper presents an isolated bidirectional dc/dc converter based on primary parallel isolated boost converter (PPIBC). This topology is an efficient solution in low voltage high power applications due to its ability to handle high currents in the low voltage side. In this paper, the converter has been modeled using non-ideal components and operated without any additional circuitry for startup using a digital soft-start procedure. Simulated and measured loop gains have been compared for the validity of the model. On-the-fly current direction change has been achieved with a prototype interconnecting two battery banks. A second prototype has been constructed and tested for supercapacitor operation in constant power charge mode.