• Preventive Nutrition and Food Science
• /
• v.14 no.3
• /
• pp.233-239
• /
• 2009

The effects of guar gum (GG) and xanthan gum (XG) at different concentrations (0, 0.2, 0.4, and 0.6% w/w) on the rheological properties of Korean waxy rice starch (WRS) pastes were evaluated under both steady and dynamic shear conditions. The flow properties of WRS-gum mixtures were determined from the rheological parameters of the power law model. The addition of GG and XG to WRS resulted in an increase in the apparent viscosity ($\eta_{a,100}$) and consistency index (K) values obtained from power law model. The flow behavior index (n) values of the WRS-XG mixtures decreased with an increase in gum concentration while there was only a marginal difference between n values for the WRS-GG mixtures. Dynamic moduli (G', G", and $\eta^*$) values in the WRS-gum mixture systems also increased with an increase in gum concentration. WRS-XG mixtures had higher dynamic moduli and lower tan $\delta$ (ratio of G"/G') values than WRS-GG mixtures, indicating that the higher dynamic rheological properties of WRS-XG can be attributed to an increase in the viscoelasticity of the continuous phase in the starch-gum mixture systems, which was due to the higher viscoleastic properties of XG compared to GG. The dynamic ($\eta^*$) and steady shear ($\eta_a$) viscosities of the WRS-XG paste at a 0.2% gum concentration followed the Cox-Merz superposition rule.

• Korean journal of food and cookery science
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1988

The physicochemical properties and gel-forming properties of corn & red bean crude starches were investigated. The results were as follows: 1. The shape of corn crude starch granule was polygonal and the mean value of minor axis and major axis were $11.5\mu\textrm{m}$ and $14.9\mu\textrm{m}$, respectively. In the meantime, the shape of red bean crude starch granule was oval and the mean value of minor axis and major axis were $22.3\mu\textrm{m}$ and $31.4\mu\textrm{m}$. 2. Amylose content of corn and red bean refined starch were 16.52 and 43.61% respectively. 3. Blue value of corn and red bean crude starch were 0.099 and 0.842, respectively. 4. Amylose of corn had molecular weight of 107,000 and degree of polymerization of 660. Amylopectin had degree of branching of 6.9 per 100 glucose units and glucose units of 14.6 persegment of amylopectin. Amylose of red bean had molecular weight of 118,000 and amylopectin had degree of branching of 5.2. 5. Water binding capacities of corn and red bean starch were 238.5 and 284.8. 6. Both swelling powers of corn and red bean starch were increased rapidly from $70^{\circ}C$ to $90^{\circ}C$. 7, Gelatinization of corn and red bean were 75.6 and $61.8^{\circ}C$. 8. Brabender hot-paste viscosities of corn at 6% and 8% showed the similar amylogrm patterns with peak viscosity. And red bean had no peak viscosity. 9. The difference of sensory characteristics for ‘Mook’ and kidney bean & red bean starch gels was significant.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.235-240
• /
• 1991

Starch phosphates were prepared from the corn starch mixed with 2% sodium tripolyphosphate by twin-screw extruder with a feed rate of 20 kg/hr and an extrusion temperature of $130^{\circ}C$, and the effects of extrusion variables on the physicochemical properties (target parameters) of starch phosphates were investigated. Interrelations of system parameters (specific mechanical energy and extrudate moisture) and rheological properities of starch was analyzed by using the response surface analysis. Degree of substitution (DS) was increased with increasing the feed moisture, and showed the maximum value at the screw of near 250 rpm, Degree of gelatinization was proportionally increased with increasing the screw speed and decreasing the feed moisture. Apparent viscosity of the paste was increased with increasing the feed moisture, but it was not significantly affected by the screw speed. It was found by scanning electron microscopy that the starch microgranules were much more degradaded, and as consequent result, the intrinsic viscosity was decreased, whereas, water solubility index was increased. The rate of retrogradation of the gels was retarded with increasing DS and decreasing viscosity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.2
• /
• pp.109-115
• /
• 2009

The properties of surimi gel from Olive flounder Paralichthys olivaceus were evaluated with addition of various food additives and by heating under different conditions. The optimum heating conditions for get good textured surimi gel from Olive flounder was 40 minutes at $85^{\circ}C$. Optimum texture characteristics such as hardness, cohesiveness, chewiness, gumminess and gel strength of olive flounder fish paste can be acquired by washing the paste 2 times and by adding sodium chloride (2.5%), sodium polyphosphate (0.3%) and starch (4%), respectively. Furthermore, we compared gel texture characteristics and strength of manufactured Olive flounder fish surimi with commercial Alaska pollack to determine their commercial applicability. Texture characteristics and gel strength of Olive flounder surimi were higher than those of the commercial Alaska pollack surimi. In addition, both lightness and whiteness were higher in surimi gel from Olive flounder than from the commercial Alaska pollack.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.442-450
• /
• 2014

In this study, we isolated a cellulase-producing bacterium isolated from traditional Korean fermented soybean paste and investigated the effect of culture conditions on the production of cellulase. This bacterium, which was identified as Bacillus subtilis 4-1 through 16S rRNA gene sequence analysis, showed the highest cellulase activity when the cells were grown at $45^{\circ}C$ for 24 hours in the CMC medium supplemented with 1.0% of soluble starch and 0.1% yeast extract. The initial optimum pH of the medium was observed in the range of 5.0~9.0. The optimal pH and temperature for the production of cellulase from B. subtilis 4-1 were pH 9.0 and $60^{\circ}C$ respectively. In addition, the enzyme showed significant activity in the temperature range of $20{\sim}90^{\circ}C$, which indicates that B. subtilis 4-1 cellulase is an alkaline-resistance and thermo-stable enzyme. This enzyme showed higher activity with CMC as the substrate for endo-type cellulase than avicel or pNPG as the exo-type substrates for exo-type cellulase and ${\beta}$-glucosidase. These results suggest that the cellulase produced from B. subtilis 4-1 is a complex enzyme rather than a mono-enzyme.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.726-732
• /
• 2014

A traditional Korean seafood (fermented anchovy) is made from the muscle and viscera of anchovies Engraulis japonica. This study was undertaken to investigate the effect of retorting condition on the quality of canned, salt-fermented anchovy fillet using red pepper paste with vinegar. Salt-fermented anchovy fillets were prepared by fermenting anchovies with salt (15%) at $5^{\circ}C$ for 15 days, and then cold air drying the fillets for 1 hour. Each batch of dried fermented anchovy fillets (60 g) was filled with 35 g of mixed red pepper paste with vinegar (red pepper paste 64%, vinegar 2%, starch syrup 13%, sugar 14%, coke 6%, soju 0.4%, crushed garlic 0.3%, ginger 0.3%), placed in a can (RR-90), seamed using a vacuum seamer, and sterilized for either Fo 9 or 11 min in a steam system retort at $121^{\circ}C$. After sterilization, we measured the pH, total volatile basic nitrogen (TVB-N), amino-N, color value (L, a, b), texture profile, thiobarbituric acid (TBA) value, sensory evaluation, and viable bacterial count of the canned fillets. We did not detect viable bacterial counts in cans subjected to either sterilization treatment, and there was no difference in physicochemical and sensory quality between the two. In fact, most sensory evaluators reported difficulty distinguishing the products. Thus, our results show that sterilization for Fo 9 min is preferable to that for Fo 11 min in the preparation of canned salt-fermented anchovy fillet using red pepper paste with vinegar.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.719-725
• /
• 2014

This study was investigated for the purpose of obtaining basic data for application to the canning process of salt-fermented anchovy Engraulis japonica fillet using tomato paste. The salt fermented anchovy fillet was prepared by fermenting anchovy fillet with salt 15% at $5^{\circ}C$ for 15 days and then cold air drying the salt-fermented anchovy fillet for 1 h at $16{\pm}1^{\circ}C$. The dried salt-fermented anchovy fillet 85 g was filled with 60 g of tomato paste sauce (tomato paste 42%, gum guar 1.0%, salt 2.0%, starch syrup 2.0%, cooking wine 1%, water 52%) and seamed by vacuum seamer in 301-3 can, then sterilized at Fo 9 and 11 min in a steam system retort at $121^{\circ}C$, respectively. The factors such as chemical composition, pH, total volatile basic nitrogen (TVB-N), amino-N, color value (L, a, b), texture profile, thiobarbituric acid (TBA) value, sensory evaluation and viable bacterial count of the canned salt-fermented anchovy fillet were measured. Texture value of the product sterilized at Fo 11 min was higher than at Fo 9 min condition. In both sterilized cans, the viable bacterial counts were not detected. There was no remarkable difference in physicochemical between sterilization conditions. As a result of sensory evaluation, most sensory evaluation inspector judged that it was difficult to distinguish the sensory difference of both products sterilized at Fo 9 min and at 11 min. The results showed that sterilization of Fo 9 min was more desirable than that of Fo 11 min to prepare canned salt-fermented anchovy fillet using tomato paste sauce, because this condition is more economical.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.755-762
• /
• 2000

Physicochemical properties of commercial sweet potato starches manufactured by 7 different companies were investigated in comparison with corn and potato starches. Crude ash and protein content varied from 0.36 to 1.02%, and from 0.04 to 0.14% based on dry weight, respectively. The protein contents were relatively smaller than that of corn or potato starch. But whiteness of the sweet potato starches was less than that of corn or potato starch. Mean diameter of the sweet potato starch granules varied from 14.23 to $21.08\;{\mu}m$ depending on the company and all sweet potato starches showed bimodal size distributions. Pasting viscosity measured by Rapid Viscoanalyzer(RVA) also showed variations among the starches of different companies. The starch from D company in Korea had the lowest pasting temperature$(74.00^{\circ}C)$ whereas the starch from a phillippine company(P) did the highest one$(80.35^{\circ}C)$. The peak viscosity of sweet potato starches was higher than that of corn starch but lower than that of potato starch. The D company starch also showed the highest peak viscosity(2283 cp) among the starches tested. Paste breakdown by hot shearing ranged from 524 cp (S company) to 1279 cp (HL company). Textural properties of the starch gels appeared significantly different among the starches of different manufacturers. The greatest hardness of the gel was $137.90\;g_{f}$ at 1 day storage whereas the lowest value was $31.53\;g_{f}$. Except the starches from 2 companies (P and S), the sweet potato starches formed very soft and weak gels. P or S company starches formed the gels similar to potato starch. Syneresis by freeze-thawing treatments appeared less for sweet potato starch gels than that for corn starch gels, but greater than that for potato starch gel. The overall properties of the sweet potato starches varied by the manufacturing companies, and ranged between those of corn and potato starches.

• Korean Journal of Weed Science
• /
• v.32 no.3
• /
• pp.204-210
• /
• 2012

The physicochemical properties of tuber starch in water chestnut have been studied. Peak viscosity, hot paste viscosity and cooling peak viscosity were 5679, 3146 and 4262 RVU, respectively. In three transition parameters, onset temperature ($T_o$), peak temperature ($T_p$), and conclusion temperature ($T_c$) were 64.1, 68.5 and $72.3^{\circ}C$, respectively. Gelatinization enthalpy (${\Delta}H$ gel) was 4.48 J/g. A-type starch has a smaller proportion (11.4%) of short chains ($DP{\geq}12$) and a larger proportion (57.2%) of short chains ($13{\leq}DP{\geq}24$). The tuber starch of water chestnut displayed an A-type X-ray diffraction pattern showing a strong diffraction peak at $2{\Theta}$ values of $15.18^{\circ}$, $17.13^{\circ}$, and $23.1^{\circ}$, and a weak peak at $2{\Theta}$ values of $18.1^{\circ}$, $20.06^{\circ}$, and $26.69^{\circ}$. Their crystallinity was 28.6% and the mean starch granule size was 21.5 ${\mu}m$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.1
• /
• pp.29-31
• /
• 1981

The eels Anguilla japonica were reared in an indoor aquarium of $1m{\times}1m{\times}0.67m$ from June 7 to August 8, 1980. The eels used for the experiment were the smallest ones which were left over from 1974 to 1976 groups, of which the others grew out years earlier. The eels were fed pelletized feed, with the results of 1.05 to 1.678 in feed coefficient, and 0.96 to $1.46\%$ in daily growth rate. The results are well comparable to those of paste feed, which has been being used in the eel farming industry up to date and will be as well used in the future, if any innovative way will not be developed. If pelletized feed can be used without any other hazards, the cost of feed will be remarkably reduced by eliminating costly $\alpha-starch$ which is absolutely necessary for the paste feed preparation, and also by preventing scattering of feed materials which is always associated with paste-feed during feeding time.