• Journal of the Korean Wood Science and Technology
• /
• v.9 no.2
• /
• pp.31-35
• /
• 1981

This study was carried out to investigate the properties of hardboard made from fire killed larch tree and also effects of standing period after killed by fire. The results are as follows; 1. There were no effects on hardboard properties among the standing period differences after killed by fire within about 2 years. 2. Specific gravities, moisture contents, water absorptions of the boards from dead trees have no differences compared with those of sound wood. 3. Bending strengths of the boards from dead trees we re decreased in the range of 24-28% of the boards from sound wood.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.714-720
• /
• 2015

Since physical and mechanical properties of wood are affected by environmental factors such as soil and climate change, this study investigated relationships between wood quality factors and stand characteristics of Castanopsis cuspidata var. sieboldii forest in the southern region of Korea, including Jeollanam-do Province and Je-ju island. The obtained results found very close relationships between physical and mechanical properties of wood and stand characteristics. The air-dried density and strength performance of woods showed a negative correlation with the diameter at breast height (DBH) while they were positively related to altitude and drainage of the forest site. And wood properties showed variations depending on the region. These results brought a conclusion that wood of Castanopsis cuspidata var. sieboldii in the southern region could be useful forest resources for timber production.

• 보존과학연구
• /
• s.26
• /
• pp.141-164
• /
• 2005

Most of the stone cultural properties is exposed to the weathering factor(rain, windetc.), so the shelter is constructed for reduction of its direct effect. But the shelter is indicated some problems that inharmoniousness of the surroundings, in section disturbance for insufficiency of light, the loss about the value of cultural properties and so on. So we have investigated on environmental condition (temperature, relative humidity, wind etc.) at the Standing Stone Buddhist Triad in Bae-ri, Gyeongju and Rock-carved Triad Buddha in Seosan because check the effect of the shelter. As the result, the Standing Stone Buddhist Triad in Bae-ri, Gyeongju is located a pine wood and a lot of bamboo grow naturally in nearing. Environmental difference on inside and outside of the shelter is not found because opened on all sides. But there is so dim for the direction of the sunlight that can't see the Standing Stone Buddhist. The base rock of Rock-carved Triad Buddha in Seosan well develop with crack and break, and the vegetation(trees, moss, lichen etc.) grow naturally in surroundings. Environmental difference on inside and outside of the shelter is found because closed on all sides and opened the front gate only inspection time. Inside of the shelter was too calm(air-velocity not detected) and humid(over 75%RH). Also the surface is occurred the dew(at 2-4 pm) and the efflorescence for effect of the water(rain, dew etc.). Besides the head of the central Buddhist is so dangerous for crack.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.622-628
• /
• 2017

In order to develop value-added utilization technology of domestic oaks the processing yield rate from the standing tree to the flooring material for the Quercus variabilis and Quercus mongolica were investigated. Also, to reduce drying time, improved drying schedule was applied and the physical properties were measured. The drying time was 173 hours in total, and the final moisture content was 5.39% (Quercus variabilis) and 4.17% (Quercus mongolica). The color difference of oak lumber before and after drying showed a significant change as ${\Delta}E$ value from 7 to 11. The shrinkage rates of Quercus variabilis and Quercus mongolica during drying were 8.1% and 8.5% in the tangential direction and 5.0% and 6.2% in the radial direction, respectively. The lumber manufacturing yield rate of sawn lumber was 30 to 40% and that of the final product was 8 to 15%. It is expected that the processing characteristics of the Quercus species investigated in this research could contribute to formulate an efficient production plan of domestic hardwoods that are still under utilization.