• 제목/요약/키워드: standard operating procedure

검색결과 121건 처리시간 0.037초

CP4 EPSPS 검출을 위한 단클론 항체 생산 (Monoclonal antibody production for CP4 EPSPS detection assays)

  • 윤아미;김일룡;최원균
    • 환경생물
    • /
    • 제39권4호
    • /
    • pp.445-451
    • /
    • 2021
  • Agrobacterium tumefaciens strain CP4 유래 5-enolpyruvylshikimate-3-phosphate synthase (EPSPS) 유전자를 포함하는 유전자변형생물체(Living modified organism, LMO)가 개발되었다. 이 같은 LMO는 국내 승인되어 사료용, 식품용, 가공용으로 이용 중이다. 간이면역 검사키트 개발을 위해서는 고효율의 단클론 항체 개발이 필수적이다. 본 연구에서는 대장균 BL21 (DE3)에서 재조합 CP4 EPSPS 단백질을 정제하였으며 SDS-PAGE와 MALDI-TOF MS 분석으로 단백질 특성을 분석하였다. 단클론 항체 제작은 (주)앱클론의 SOP 매뉴얼에 따라 진행하였다. 본 연구 결과 5개의 단클론 항체 클론(2F2, 4B9, 6C11, 10A9, 10G9)를 확보하였다. 5종의 단클론 항체의 효율과 특이도 검정을 위해서 LM 면화 추출액을 이용한 western blotting 분석을 실시하였다. 모든 단클론 항체는 CP4 EPSPS를 함유하는 MON1445와 MON88913을 특이적으로 검출하였으며 비변형 면화 및 타종의 LM 면화에서는 검출되지 않았다. 이러한 결과들을 바탕으로 CP4 EPSPS 단클론 항체는 LMO에 함유된 CP4 EPSPS 단백질을 타겟으로 항체 기반 검출법 개발에 활용될 것으로 사료된다.

Feasibility of a Clinical-Radiomics Model to Predict the Outcomes of Acute Ischemic Stroke

  • Yiran Zhou;Di Wu;Su Yan;Yan Xie;Shun Zhang;Wenzhi Lv;Yuanyuan Qin;Yufei Liu;Chengxia Liu;Jun Lu;Jia Li;Hongquan Zhu;Weiyin Vivian Liu;Huan Liu;Guiling Zhang;Wenzhen Zhu
    • Korean Journal of Radiology
    • /
    • 제23권8호
    • /
    • pp.811-820
    • /
    • 2022
  • Objective: To develop a model incorporating radiomic features and clinical factors to accurately predict acute ischemic stroke (AIS) outcomes. Materials and Methods: Data from 522 AIS patients (382 male [73.2%]; mean age ± standard deviation, 58.9 ± 11.5 years) were randomly divided into the training (n = 311) and validation cohorts (n = 211). According to the modified Rankin Scale (mRS) at 6 months after hospital discharge, prognosis was dichotomized into good (mRS ≤ 2) and poor (mRS > 2); 1310 radiomics features were extracted from diffusion-weighted imaging and apparent diffusion coefficient maps. The minimum redundancy maximum relevance algorithm and the least absolute shrinkage and selection operator logistic regression method were implemented to select the features and establish a radiomics model. Univariable and multivariable logistic regression analyses were performed to identify the clinical factors and construct a clinical model. Ultimately, a multivariable logistic regression analysis incorporating independent clinical factors and radiomics score was implemented to establish the final combined prediction model using a backward step-down selection procedure, and a clinical-radiomics nomogram was developed. The models were evaluated using calibration, receiver operating characteristic (ROC), and decision curve analyses. Results: Age, sex, stroke history, diabetes, baseline mRS, baseline National Institutes of Health Stroke Scale score, and radiomics score were independent predictors of AIS outcomes. The area under the ROC curve of the clinical-radiomics model was 0.868 (95% confidence interval, 0.825-0.910) in the training cohort and 0.890 (0.844-0.936) in the validation cohort, which was significantly larger than that of the clinical or radiomics models. The clinical radiomics nomogram was well calibrated (p > 0.05). The decision curve analysis indicated its clinical usefulness. Conclusion: The clinical-radiomics model outperformed individual clinical or radiomics models and achieved satisfactory performance in predicting AIS outcomes.

방사성오염물질 처분에 대한 고찰 (Consideration of Radioactive Contamination Materials Disposal)

  • 임현진;김태엽;이홍재;김진의;김현주
    • 핵의학기술
    • /
    • 제14권2호
    • /
    • pp.128-132
    • /
    • 2010
  • 핵의학과 종합조작실은 방사선 관리구역으로 이곳에서 발생된 방사성오염물질은 방사성폐기물로 간주하여 일반쓰레기와 별도로 관리를 해야 한다. 본 실험은 우리가 미처 인식하지 못해 일반쓰레기로 처분되었던 방사성오염물질의 오염도를 측정하고 원인을 분석하여 보다 적극적인 방사성폐기물 관리 운영의 필요성을 제시하고자 함이다. 측정대상은 방사성의약품을 표지하기 위해 사용된 생리식염수와 $^{99}Mo$/$^{99m}Tc$ generator(국산 및 외산)에서 발생한 generator cap, saline needle cap, $^{99m}Tc$-needle cap, saline vial로 하였고, gamma survey meter를 이용하여 평균값과 표준 편차(mean${\pm}$SD)로 나타냈다. 측정대상물질의 오염유무를 알기 위해 방사선 관리구역에서 반출될 수 있는 물질의 표면오염도인 최대허용표면오염도의 1/10(43.2 cpm)을 기준값으로 정하였다. 각각의 표면오염도를 측정한 결과 방사성의약품 표지를 위해 사용된 생리식염수에서는 $14,429{\pm}26,378$ cpm으로 최대 허용표면오염도의 1/10을 초과하였다. 그리고 측정된 generator중 외산에서는 generator cap: $17{\pm}28$ cpm, saline needle cap: $35{\pm}66$ cpm, $^{99m}Tc$-needle cap: $9{\pm}21$ cpm, saline vial: $13{\pm}28$ cpm으로 최대허용표면오염도의 1/10를 초과하지 않았지만 국산에서는 generator cap: $22,852{\pm}52,545$ cpm, saline needle cap: $87,367{\pm}109,711$ cpm, $^{99m}Tc$-needle cap: $9,008{\pm}10,459$ cpm, saline vial: $186,416{\pm}158,196$ cpm으로 최대 허용표면오염도의 1/10를 초과하였다. 외산 generator에서 발생한 측정대상물질은 일반폐기물로 처분하고 국산 generator와 방사성의약품을 표지하기 위해 사용된 생리식염수는 반드시 방사성폐기물로 간주하여 처분해야 한다. 따라서 일반쓰레기 뿐만 아니라 종합조작실에서 반출되는 모든 물질에 대한 자체적인 방사선측정, 기록 및 비치와 방사성폐기물에 대한 지속적인 교육을 통해 방사성 폐기물이 일반쓰레기로 처분되어 나가는 것을 예방 할 수 있을 것이다.

  • PDF

1930년대 중국 문서당안 행정개혁론의 이해 (The Records and Archives Administrative Reform in China in 1930s)

  • 이원규
    • 기록학연구
    • /
    • 제10호
    • /
    • pp.276-322
    • /
    • 2004
  • Historical interest in China in 1930s has been mostly focused on political characteristic of the National Government(國民政府) which was established by the KMT(中國國民黨) as a result of national unification. It is certain that China had a chance to construct a modern country by the establishment of the very unified revolutionary government. But, it was the time of expanding national crises that threatened the existence of the country such as the Manchurian Incident and the Chinese-Japanese War as well as the chaos of the domestic situation, too. So it has a good reason to examine the characteristic and pattern of the response of the political powers of those days. But, as shown in the recent studies, the manifestation method of political power by the revolutionary regime catches our attention through the understanding of internal operating system. Though this writing started from the fact that the Nationalist Government executed the administrative reform which aimed at "administrative efficiency" in the middle of 1930s, but it put stress on the seriousness of the problem and its solution rather than political background or results. "Committee on Administrative Efficiency(行政效率委員會)", the center of administrative reform movement which was established in 1934, examined the plan to execute the reform through legislation by the Executive Council(行政院) on the basis of the results of relevant studies. They claimed that the construction of a modern country should be performed by not political revolution anymore but by gradual improvement and daily reform, and that the operation of the government should become modern, scientific and efficient. There were many fields of administrative reform subjects, but especially, the field of records and archives adminstration(文書檔案行政) was studied intensively from the initial stage because that subject had already been discussed intensively. They recognized that records and archives were the basic tool of work performance and general activity but an inefficient field in spite of many input staff members, and most of all, archival reform bring about less conflicts than the fields of finance, organization and personnel. When it comes to the field of records adminstration, the key subjects that records should be written simply, the process of record treatment should be clear and the delay of that should be prevented were already presented in a records administrative meeting in 1922. That is, the unified law about record management was not established, so each government organization followed a conventional custom or performed independent improvement. It was through the other records administrative workshop of the Nationalist Government in 1933 when the new trend was appeared as the unified system improvement. They decided to unify the format of official records, to use marker and section, to unify the registration of receipt records and dispatch records and to strengthen the examination of records treatment. But, the method of records treatment was not unified yet, so the key point of records administrative reform was to establish a unified and standard record management system for preventing repetition by simplifying the treatment procedure and for intensive treatment by exclusive organizations. From the foundation of the Republic of China to 1930s, there was not big change in the field of archives administration, and archives management methods were prescribed differently even in the same section as well as same department. Therefore, the point at issue was to centralize scattered management systems that were performed in each section, to establish unified standard about filing and retention period allowance and to improve searching system through classification and proper number allowance. Especially, the problem was that each number system and classification system bring about different result due to dual operation of record registration and archives registration, and that strict management through mutual contrast, searching and application are impossible. Besides, various problems such as filing tools, arrangement method, preservation facilities & equipment, lending service and use method were raised also. In the process this study for the system improvement of records and archives management, they recognized that records and archives are the identical thing and reached to create a successive management method of records and archives called "Records and Archives Chain Management Method(文書檔案連鎖法)" as a potential alternative. Several principles that records and archives management should be performed unitedly in each organization by the general record recipient section and the general archives section under the principle of task centralization, a consistent classification system should be used by classification method decided in advance according to organizational constitution and work functions and an identical number system should be used in the process of record management stage and archive management stage by using a card-type register were established. Though, this "Records and Archives Chain Management Method" was developed to the stage of test application in several organizations, but it was not adopted as a regular system and discontinued. That was because the administrative reform of the Nationalist Government was discontinued by the outbreak of the Chinese-Japanese War. Even though the administrative reform in the middle of 1930s didn't produce practical results but merely an experimentation, it was verified that the reform against tradition and custom conducted by the Nationalist Government that aimed for the construction of a modern country was not only a field of politics, but on the other hand, the weak basis of the government operation became the obstacle to the realization of the political power of the revolutionary regime. Though the subject of records and archives administrative reform was postponed to the future, it should be understood that the consciousness of modern records and archives administration and overall studies began through this examination of administrative reform.

신뢰성에 기초한 하수처리장 운전효율 평가 (Performance Evaluation of WWTP Based on Reliability Concept)

  • 이두진;선상운
    • 대한환경공학회지
    • /
    • 제29권3호
    • /
    • pp.348-356
    • /
    • 2007
  • 본 연구에서는 변동적인 특성을 지닌 자료 분석에 효과적인 확률, 통계기법을 도입하여, 하수처리장의 처리효율을 분석하고 그 결과를 설계에 반영할 수 있는 방법을 제시하였다. 이를 위하여 3개 대상하수처리장의 유입수와 처리수 자료(BOD, COD, SS, TN, TP)를 대상으로 통계분석을 실시하였다. 유입수의 표준편차는 $9.7\sim34.9$ mg/L로 평균농도 대비 약 $16.7\sim54.7%$의 범위를 보였으며, BOD와 SS가 상대적으로 큰 편차를 보였다. 처리수는 전 항목에 걸쳐 표준편차 $0.28\sim4.48$ mg/L, 평균수질 대비 $13.9\sim125%$의 범위를 보였고, SS의 변동이 큰 것으로 나타났다. 각 처리장 처리수의 분포는 일정한 양상을 보이지 않았지만 BOD와 COD의 경우 전반적으로 정규분포 형태를, SS와 TN, TP는 대수정규분포에 근접한 형태를 나타냈으며, 오른쪽으로 치우친 경향을 나타내었다. 위와 같은 기본적인 통계처리 결과를 바탕으로 신뢰도 계수(coefficient of reliability, COR)를 도입하여 처리효율을 평가한 결과, 각 항목의 처리수질은 백분위 50% 수준에서 방류수 수질기준의 절반에 해당하는 농도를 보였으며, 모든 처리장에서 연간 방류수 수질기준 달성확률이 100%로 나타났다. 처리공정의 설계와 운전시 각 공정이 가지는 고유의 변동성을 반영하기 위해서는 성능결과를 객관화 할 수 있는 확률적 접근이 필요하며, 특히 방류수 수질기준에 대한 처리성능을 보다 과학적으로 평가하기 위해서는 신뢰성계수를 도입하여 기준달성의 신뢰성을 분석하는 것이 적절할 것으로 판단되었다.30nm$ 조건)와 347 nm(${\Delta}\lambda=60nm$ 조건)에서의 형광 세기가 현장에서 톱밥 침출수 오염을 식별하는 가장 이상적인 식별지표로 밝혀졌다. 비록 이 연구가 제한된 대표시료와 오염원 종류에 국한되었지만 여기에 사용된 식별지표 평가 과정 및 구체적인 실험방법은 향후 형광측정을 이용한 실시간 오염원 추적 연구에 중요한 기초자료를 제공할 것으로 기대한다. 공정의 효율면에서도 훨씬 효율적인 것으로 조사되었다..문에, 이 연구에서 개발된 수치모델은 퇴적물에서 일어나는 미량 오염 물질의 거동을 파악하기 위해 유용하게 사용되어질 수 있을 것으로 사료된다.on between instantaneous attack angle of blade section and the resultants real time force components. Through these investigation it is found out that the conventional imagination that the 7cull motion should be effective in generating lift force must be reconsidered because the attack angle of scull blade are too great to free from stall phenomena during the sculling operation.잠119>잠113>잠120의 순이었다.지방산의 조성이 많은 차이를 보였다.{2+}$ 26 및 $Na^+$ 26 mg $L^{-1}$이었다. 양액 재배 후 버려지는 폐양액 중의 무기성분 함량은 양액재배에

병원성미생물의 불활성화를 위한 산·알칼리처리가 양돈분뇨의 이화학적 성상에 미치는 영향 (Physicochemical Changes of Swine Manure by the Treatment of Acid and Alkali for Inactivation of Pathogenic Microorganisms)

  • 김초롱;김수량;김하제;전상준;한호;김동균;이명규
    • 한국축산시설환경학회지
    • /
    • 제18권3호
    • /
    • pp.229-234
    • /
    • 2012
  • 본 연구는 구제역 긴급행동 지침 (SOP)에서 제시한 화학적 처리가 양돈분뇨의 이화학적 성상에 미치는 영향을 알아보고 이에 따른 적절한 후처리 방법을 모색하기 위하여 수행한 것이다. 가축분뇨의 알칼리처리-산중화 및 산처리-알칼리 중화처리는 처리조건에 따라 다양한 이화학적 변화가 있었으며, 이에 대한 결과요약은 다음과 같다. 1. B4 처리구 (Citric Acid-Calcium Oxide)의 경우는 산처리 후 알칼리 중화처리 시에 응고현상이 발생하였다. 이는 구연산과 생석회의 투입으로 인한 물질 간 화학적 결합에 기인하는 것으로 사료된다. 2. 산처리-알칼리 중화 (B처리구)의 모든 처리구에서 EC가 약 50 mS/cm 전후까지 증가 하였으며, A4 처리구를 제외한 알칼리처리-산 중화 (A처리구)에서는 처리 후 원수의 EC 보다도 낮은 경향을 나타냈다. 3. $NH_4{^+}$-N의 농도는 산처리-알칼리 중화 (B처리구)에서 처리 후 거의 변화가 없는 반면, 알칼리처리-산 중화 (A처리구)에서는 급격히 감소하였다. 이는 암모니아의 탈기로 인한 기작으로 사료되며, 특히 CaO를 이용한 A1, A2 처리구에서 두드러지게 나타났다. 4. 알칼리처리-산 중화 및 산처리-알칼리 중화는 처리조건에 따라서 이화학적 변화의 양상이 다양하다. 적정 pH 수준을 위한 시약의 소요량 및 운영관리 면에서 볼 때, 병원성미생물 등으로 오염된 가축분뇨 화학적 전처리시에는 산처리-알칼리중화 (B처리구) 보다는 알칼리처리-산 중화 처리구 (A처리구) 적합 할 것으로 사료된다. 그러나 자원화, 정화처리 등 후처리방법의 선정은 각 농가 및 지역적 환경요소에 따라 다르므로 산 알칼리제제의 소요량에 따른 경제성 평가 및 처리목적 등에 대한 충분한 검토가 필요하다.

장애물 제한표면과 항공학적 검토방법의 제도 개선에 관한 제언 (A Proposal on the Improvement of Obstacle Limitation Surface and Aeronautical Study Method)

  • 김휘양;전종진;유광의
    • 항공우주정책ㆍ법학회지
    • /
    • 제34권1호
    • /
    • pp.159-201
    • /
    • 2019
  • 1951년 부속서 14, 제1권의 제정과 함께 활주로 주변의 제한표면이 설정된 이후, 항공기술과 항법 성능은 눈부신 성장을 이루었으며, 이를 통한 항행의 안전성과 정밀성은 크게 향상되었다. 그러나, 항공기의 안전한 비행을 위한 주변 장애물에 대한 제한은 변함없이 유지되고 있다. 공항과 주변을 비행하는 항공기의 안전확보를 위한 표준과 기준에 대해서는 부속서 11, 항공교통업무(Annex 11, Air Traffic Services)와 부속서 14, 비행장(Annex 14, Aerodromes) 등에서 명시하고 있다. 특히, 항공기와 지상 장애물의 충돌방지를 위한 수목 산악 구릉 등 자연장애물과 건축물 구조물 등의 인공 장애물 등 공항 주변 장애물의 제한에 대해서는 부속서 14, 제1권에서 그 기준을 제시하고 있다. 반면, 부속서 14, 제1권은 장애물 제한표면의 적용에 있어, 항공학적 검토를 통해 항공기 운항의 안전과 규칙성을 저해하지 않는다고 판단되는 경우에는 기준을 위배하는 장애물을 제거하지 않을 수 있다고 하여 예외 기준을 적용하고 있다. 항공학적 검토는 미국, 캐나다 및 유럽 등 여러 국가에서 도입 시행하고 있었으며, 이에 따라 우리나라는 2008년 5월, (구(舊))항공법 시행규칙의 일부 조항을 신설 및 개정하고, 항공학적 검토지침을 제정하여 예외적 사항을 인정하게 되었다. 그러나, ICAO는 항공학적 검토에 관한 절차와 방법에 대해 구체적 지침을 제공하지 않고 있어 항공학적 검토를 시행하는 국가는 자체적인 절차와 방법을 마련하여 적용하는 실정이다. 이러한 현실적 상황을 반영하듯이, 제12차 세계항행회의와 제38차 총회에서 체약국은 현행 장애물 제한표면에 관한 기준과 항공학적 검토의 방법에 대한 재검토를 요구하였으며, ICAO는 관련 전담팀을 구성하여 새로운 기준 마련에 착수하였다. 이에 본 연구는 장애물 제한표면과 항공학적 검토에 관한 국제적 변화의 움직임에 맞추어, 현행 장애물 제한표면과 높이 제한에 관한 국내 외 기준을 비교 분석하는 한편, 항공학적 검토에 관한 방법과 절차 및 제도에 대해 살펴보고자 한다. 아울러, 장애물의 영향성을 평가함에 항공학적 검토가 현실적이고 보편적으로 활용될 것으로 예상하는바, 현행 항공학적 검토에 항적 자료를 활용한 정량적 분석방법의 개발과 함께 항공학적 검토의 제도적 개선을 제언하고자 한다.

불량환경하(不良環境下)에서의 제초제(除草劑) 약해(藥害)와 경감기술(輕減技術) (Herbicidal Phytotoxicity under Adverse Environments and Countermeasures)

  • 권용웅;황형식;강병화
    • 한국잡초학회지
    • /
    • 제13권4호
    • /
    • pp.210-233
    • /
    • 1993
  • The herbicide has become indispensable as much as nitrogen fertilizer in Korean agriculture from 1970 onwards. It is estimated that in 1991 more than 40 herbicides were registered for rice crop and treated to an area 1.41 times the rice acreage ; more than 30 herbicides were registered for field crops and treated to 89% of the crop area ; the treatment acreage of 3 non-selective foliar-applied herbicides reached 2,555 thousand hectares. During the last 25 years herbicides have benefited the Korean farmers substantially in labor, cost and time of farming. Any herbicide which causes crop injury in ordinary uses is not allowed to register in most country. Herbicides, however, can cause crop injury more or less when they are misused, abused or used under adverse environments. The herbicide use more than 100% of crop acreage means an increased probability of which herbicides are used wrong or under adverse situation. This is true as evidenced by that about 25% of farmers have experienced the herbicide caused crop injury more than once during last 10 years on authors' nationwide surveys in 1992 and 1993 ; one-half of the injury incidences were with crop yield loss greater than 10%. Crop injury caused by herbicide had not occurred to a serious extent in the 1960s when the herbicides fewer than 5 were used by farmers to the field less than 12% of total acreage. Farmers ascribed about 53% of the herbicidal injury incidences at their fields to their misuses such as overdose, careless or improper application, off-time application or wrong choice of the herbicide, etc. While 47% of the incidences were mainly due to adverse natural conditions. Such misuses can be reduced to a minimum through enhanced education/extension services for right uses and, although undesirable, increased farmers' experiences of phytotoxicity. The most difficult primary problem arises from lack of countermeasures for farmers to cope with various adverse environmental conditions. At present almost all the herbicides have"Do not use!" instructions on label to avoid crop injury under adverse environments. These "Do not use!" situations Include sandy, highly percolating, or infertile soils, cool water gushing paddy, poorly draining paddy, terraced paddy, too wet or dry soils, days of abnormally cool or high air temperature, etc. Meanwhile, the cultivated lands are under poor conditions : the average organic matter content ranges 2.5 to 2.8% in paddy soil and 2.0 to 2.6% in upland soil ; the canon exchange capacity ranges 8 to 12 m.e. ; approximately 43% of paddy and 56% of upland are of sandy to sandy gravel soil ; only 42% of paddy and 16% of upland fields are on flat land. The present situation would mean that about 40 to 50% of soil applied herbicides are used on the field where the label instructs "Do not use!". Yet no positive effort has been made for 25 years long by government or companies to develop countermeasures. It is a really sophisticated social problem. In the 1960s and 1970s a subside program to incoporate hillside red clayish soil into sandy paddy as well as campaign for increased application of compost to the field had been operating. Yet majority of the sandy soils remains sandy and the program and campaign had been stopped. With regard to this sandy soil problem the authors have developed a method of "split application of a herbicide onto sandy soil field". A model case study has been carried out with success and is introduced with key procedure in this paper. Climate is variable in its nature. Among the climatic components sudden fall or rise in temperature is hardly avoidable for a crop plant. Our spring air temperature fluctuates so much ; for example, the daily mean air temperature of Inchon city varied from 6.31 to $16.81^{\circ}C$ on April 20, early seeding time of crops, within${\times}$2Sd range of 30 year records. Seeding early in season means an increased liability to phytotoxicity, and this will be more evident in direct water-seeding of rice. About 20% of farmers depend on the cold underground-water pumped for rice irrigation. If the well is deep over 70m, the fresh water may be about $10^{\circ}C$ cold. The water should be warmed to about $20^{\circ}C$ before irrigation. This is not so practiced well by farmers. In addition to the forementioned adverse conditions there exist many other aspects to be amended. Among them the worst for liquid spray type herbicides is almost total lacking in proper knowledge of nozzle types and concern with even spray by the administrative, rural extension officers, company and farmers. Even not available in the market are the nozzles and sprayers appropriate for herbicides spray. Most people perceive all the pesticide sprayers same and concern much with the speed and easiness of spray, not with correct spray. There exist many points to be improved to minimize herbicidal phytotoxicity in Korea and many ways to achieve the goal. First of all it is suggested that 1) the present evaluation of a new herbicide at standard and double doses in registration trials is to be an evaluation for standard, double and triple doses to exploit the response slope in making decision for approval and recommendation of different dose for different situation on label, 2) the government is to recognize the facts and nature of the present problem to correct the present misperceptions and to develop an appropriate national program for improvement of soil conditions, spray equipment, extention manpower and services, 3) the researchers are to enhance researches on the countermeasures and 4) the herbicide makers/dealers are to correct their misperceptions and policy for sales, to develop database on the detailed use conditions of consumer one by one and to serve the consumers with direct counsel based on the database.

  • PDF

운항승무원의 항공기 2개 형식 운항관련 국내외 기준 비교 연구 (A Comparative Study of Domestic and International regulation on Mixed-fleet Flying of Flight crew)

  • 이구희
    • 항공우주정책ㆍ법학회지
    • /
    • 제30권2호
    • /
    • pp.403-425
    • /
    • 2015
  • 운항승무원은 항공기 운항에 필요한 적합한 자격요건을 충족해야 하며 이를 위해서는 항공기 운항에 필요한 자격요건과 항공기간 유사성 등으로 인해 불필요한 자격요건이 무엇인지 확립되어 있어야 한다. 시카고협약은 국제민간항공에 있어서 가장 기본이 되는 국제조약이며 시카고협약 체약국은 시카고협약 부속서에서 정한 '표준 및 권고방식(SARPs)'에 따라 항공법규를 제정하여 운영 중이며, 안전하고 효율적인 기준 수립 및 적용을 위해 지속적으로 노력하고 있다. 본 논문은 운항승무원의 항공기 2개 형식 운항에 대한 ICAO, 한국, FAA, EASA 등의 국내외 기준의 차이점을 인식하고 이를 토대로 한국의 관련 제도를 개선 보완하고자 한다. 운항승무원의 항공기 2개 형식 운항에 대한 국내외 기준을 비교하면서, 한국의 관련 법규가 국제기준 대비 불합리한 측면이 있어 이를 토대로 개선방안을 제시하였다. 기본적으로 항공기 운영자는 기장 또는 부기장이 동일 형식의 비행기로 90일 내에 적어도 3회의 이륙과 착륙을 행한 경험이 없는 기장 또는 부기장을 해당 항공기를 운항하도록 승무시켜서는 아니 된다. 또한 운항승무원은 모든 운항하는 항공기 형식에 대하여 장비 및 절차에 대한 중요 차이점에 익숙해야 한다. 또한 항공기 운영자는 조종사의 조종 기능 및 비상절차 수행능력이 해당 항공기 형식에서 수행능력이 있도록 적합한 방법으로 심사가 수행되어야 한다. 이와 관련해 정기적으로 기량심사가 수행되어야 한다. 한편 항공기 운영자가 운항승무원에게 항공기 간의 유사성을 토대로 서로 다른 항공기 형식을 운항하도록 하는 경우, 항공당국은 각각의 항공기 형식을 운항하기 위한 면제 요건을 설정하여 적용할 수 있다. 결론적으로 운항승무원이 2개 형식의 항공기를 운항하기 위해서는 해당 형식 항공기 운항을 위한 유효한 자격이 있어야 하며, 이를 위해서는 이에 합당한 훈련프로그램을 이수해야 한다. 따라서 특별히 요건이 면제되거나 요구량을 축소하여 적용할 수 있는 법적 근거가 없는 한, 2개 형식 항공기를 운항하기 위해서는 항공기 형식 간의 유사성을 토대로 적용할 수 있는 진보된 훈련 프로그램이 있음에도 불구하고 각각의 항공기 형식에 필요한 모든 운항자격을 충족해야 한다. 항공기 제작사는 표준비행절차 및 안전운항을 위해 새로 항공기를 개발함에 있어서 항공기 시스템에 대하여 기본적인 틀을 유지하면서 기능을 보완 개선하고 있어 항공기 간에 표준화된 적용이 확대되고 있으며 항공기 간의 차이수준은 점차 줄어들고 있다. 또한 다양한 항공 비즈니스 출현 및 레저용 항공시장의 활성화로 운항승무원이 서로 다른 항공기를 번갈아 운항할 필요성이 점차 높아지고 있다. 그럼에도 불구하고 한국은 운항승무원의 훈련 및 운항자격프로그램과 관련하여 신규도입 항공기에 적용할 항공기 간의 차이수준에 따라 실질적으로 다르게 적용할 수 있는 관련 법규 및 체계가 전무한 상태이며, 2개 형식 이상의 항공기를 운항하기 위한 구체적인 기준은 물론 이와 관련하여 항공안전을 위해 금지하거나 제한하는 기준도 없기 때문에 항공기 운영자의 정책적인 판단에 따를 수밖에 없는 실정이다. 따라서 항공당국은 비행표준평가위원회 제도를 도입하여 비행표준평가를 통해 항공기 간의 차이수준을 분석하고 이를 토대로 운항승무원이 합당한 교육훈련 및 자격요건을 효율적으로 적용할 수 있도록 항공기 간 차이수준별 자격요건체계를 수립하여 적용해야 할 것이다. 이와 관련하여 본 논문에서는 항공기 간의 차이수준 평가 및 2개 형식 이상 항공기 운항에 대한 국내외 항공법규를 고찰하고 합리적인 제도 운영을 위한 몇 가지 개선방안을 제시하였다. 본 논문이 1) 정부, 학계 및 항공사 등 유관부문에서 항공안전증진을 위한 국제 동향을 이해하는데 도움이 되고, 2) 국내 항공법규를 개선하는데 도움을 주고, 3) 아울러, 국제표준 준수 및 항공안전증진에 기여하길 기대한다.

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF