• 터널과지하공간
• /
• 제19권6호
• /
• pp.490-497
• /
• 2009

최근 발생한 5개의 중규모 지진으로부터 관측된 지반진동 파형을 이용하여 응답스펙트럼을 분석하고 결과를 국내 원자력 관련 구조물의 내진설계 기준과 국내 일반 구조물 및 건축물 내진설계기준과 각각 비교하였다. 연구에 이용된 지반진동 개수는 수평성분 및 수직성분 각각 74개 및 89개이며 주파수별 지반응답을 구하고 최대 지반 가속도 값를 이용하여 정규화 분석을 수행하였다. 본 연구결과를 국내 원자력시설물의 내진기준으로 이용되고 있는 Reg. Guide 1.60과 비교한 결과 특히 약 1 Hz 이상의 전체 고주파수 영역에서 수평 성분 스펙트럼 이 Reg. Guide 1.60 보다 높은 값을 보여 주었다. 수직성분은 약 7~8 Hz 부근에서 약간 초과하였다. 또한 국내 일반 구조물 및 건축물 내진설계기준인 표준 설계응답스펙트럼을 3개 지반조건에 적용한 결과를 분석 자료와 동시에 비교한 결과 특히 약 2초(0.5 Hz) 이하의 단주기 영역의 전체 대역(SE 지반조건)에서 수평 성분 자료처리 결과가 기준을 크게 초과하는 현상을 보여 주었다. 수직성분은 전체 주기 영역에서 SD 지반조건의 기준과 유사한 특징을 보여 주었다. 물론 이러한 현상은 국내 지각의 주파수별 감쇠 및 부지 직하부의 감쇠 특성 등과 복합적으로 관련되어 발생한 현상으로 판단된다. 향후 국내 지진활동 실정에 적합한 내진설계 기준 마련을 위해 관측자료의 질적 향상 및 양적인 축적 등을 통하여 특히 수평 성분의 약 1 Hz 이상의 고주파수 대역에서 응답스펙트럼 기준의 보수성을 심각하게 고려할 필요가 있다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2797-2801
• /
• 2023

CdZnTeSe (CZTS) has attracted attention for applications in X- and gamma-ray detectors owing to its improved properties compared to those of CdZnTe (CZT). In this study, we grew and processed single crystals of CZT and CZTS using the Bridgeman method to confirm the feasibility of using a dosimeter for high-energy X-rays in radiotherapy. We evaluated their linearity and precision using the coefficient of determination (R²) and relative standard deviation (RSD). CZTS showed sufficient RSD values lower than 1.5% of the standard for X-ray dosimetry, whereas CZT's RSD values increased dramatically under some conditions. CZTS exhibited an R² value of 0.9968 at 500 V/cm, whereas CZT has an R² value of 0.9373 under the same conditions. The X-ray response of CZTS maintains its pulse shape at various dose rates, and its properties are improved by adding selenium to the CdTe matrix to lower the defect density and sub-grain boundaries. Thus, we validated that CZTS shows a better response than CZT to high-energy X-rays used for radiotherapy. Further, the applicability of an onboard imager, a high-energy X-ray (>6 MV) image, is presented. The proposed methodology and results can guide future advances in X-ray dose detection.

• 분석과학
• /
• 제32권2호
• /
• pp.48-55
• /
• 2019

The simple and effective analytical method for the quality control of a novel scalp tonic formulation has been developed and optimized in terms of HPLC conditions and sample preparation method, meanwhile, the optimization of preparation condition was using response surface methodology (RSM) based on central composite design (CCD). Oleanolic acid was selected as marker compound because of its bioactivities for alopecia therapy. The developed analytical method and extraction condition were successfully qualified. Coefficient of determination ($r^2$) for the calibration was 0.9997 with a line passing through the origin point in the range of 0.1-100 mg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 17.5 ng/mL and 55.0 ng/mL, respectively. The intra-day and inter-day precision of the method were 0.5-1.4 % and 0.7-1.8 % in relative standard deviation, respectively, while those accuracy were 99.5-100.9 % and 100.0-102.2 %, respectively. The repeatability of oleanolic acid in samples ranged of 0.3-1.9 % based on peak area and 0.3-0.7 % for retention time. Recoveries from samples were 95.0-99.4 % with lower than 1.8 % in relative standard deviation. Overall, the developed analytical method will be used for quality control of this commercial scalp tonic products successfully.

• 대한산업공학회지
• /
• 제31권2호
• /
• pp.164-172
• /
• 2005

A loss function approach to a multiresponse problem is considered, when process parameters are regarded as random variables. The variation of each response may be amplified through so called propagation of error (POE), which is defined as the standard deviation of the transmitted variability in the response as a function of process parameters. The forms of POE for each response and for a pair of responses are proposed and they are reflected in our loss function approach to determine the optimal condition. The proposed method is illustrated using a polymer case. The result is compared with the case where parameter fluctuation is not considered.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.67-76
• /
• 1989

본 논문에서는 표면거칠기 측정에 있어 70% 이상을 차지하는 촉침식을 이용하여 필터의 cut-off치와 위상특성에 따른 표면거칠기 값의 변화와 필터의 선택에 따른 장점 및 문제점에 대하여 알아보고자 한다.

• 한국지진공학회논문집
• /
• 제21권6호
• /
• pp.277-286
• /
• 2017

On September 12, 2016, Gyeongju earthquake occurred. Its local magnitude was announced to be $M_L=5.8$ by Korea Meteorological Administration (KMA). Ground motion data recorded at KMA, EMC and KERC stations was obtained from their data bases. From the data, horizontal and vertical response spectra, and V/H ratio were calculated. The horizontal spectrum was defined as geometric mean spectrum, GMRotI50. From the statistical analysis of the geometric mean spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. Applying the same procedure, the shape and transition periods of vertical spectrum was obtained. These results were compared with the Korean standard design spectra, which were developed from domestic and overseas intraplate earthquake records. The response spectra of Gyeongju earthquake were found to be almost identical with the newly proposed design spectra. Even the V/H ratios showed good agreement. These results confirmed that the method adopted when developing the standard design spectra were valid and the developed design spectra were reliable.

• Nuclear Engineering and Technology
• /
• 제10권4호
• /
• pp.223-229
• /
• 1978

인슈린방사면역측정(IRIA)에서 흔히 목격하는 비정상적인 표준투여응답곡선 (standard dose response curve)을 정온유지 (incubation) 조건을 변화시킴으로써 해석 하였다. 그와 같은 이상(abnormality)의 원인은 두 반응물질간의 불안전한 평형에 있는 것으로 밝혀졌다. 인슈린측정용 혈청시료의 온도를 조절함으로써 혈청시료에 대한 B/F 값이 표준 곡선의 측정가능범위로부터 크게 벗어나는 원인을 조사할 수 있었다. 이들 두 실패요인은 주로 정온유지조건에 관계되었으므로 4$^{\circ}C$에서 48시간 실시하는 정온유지조건이 IRIA를 위하여 강조되었다.

• 패션비즈니스
• /
• 제6권3호
• /
• pp.52-59
• /
• 2002

Companies desire to increase total profits. Consumer's buying behavior depends on the nature of the product just like look, touch, and feel of fabric in apparel shopping on-line with Quick Response based mass-customization. The purpose of this study is to investigate the consumer's texture sensibility from textile image under on-line environment in order to give the direction for marketing strategy in apparel ebusiness. Total 8 kinds of textile swatches representing each of 8 texture-sensibility-axes were selected for this research on the basis of finding in previous studies. The analyses of 60 questionnaires were conducted by frequency, mean, and standard deviation using SPSS 10.0. The results of this research were as follows: Under on-line environment, consumers recognized Homespun as natural, strong, and warm texture sensibility, but not as glossy, and transparent. Oxford was recognized by consumers as refreshing, and plain texture. Consumers recognized Muslin as flat and refreshing, Melton not as transparent but as warm, strong, dense, and natural, Habutae as thin, transparent, refreshing, flat, glossy, and soft, Linen as sandy, Suede not as transparent but as strong, and warm, and Terry as warm, and dense.

• Wind and Structures
• /
• 제32권4호
• /
• pp.341-354
• /
• 2021

Articulated towers are one of the class of compliant offshore structures that freely oscillates with wind and waves, as they are designed to have low natural frequency than ocean waves. The present study deals with the dynamic response of a double-pendulum articulated tower under hydrodynamic and aerodynamic loads. The wind field is simulated by two approaches, namely, single-point and multiple-point. Nonlinearities such as instantaneous tower orientation, variable added mass, fluctuating buoyancy, and geometrical nonlinearities are duly considered in the analysis. Hamilton's principle is used to derive the nonlinear equations of motion (EOM). The EOM is solved in the time domain by using the Wilson-θ method. The maximum, minimum, mean, and standard deviation and salient power spectral density functions (PSDF) of deck displacement, bending moment, and central hinge shear are drawn for high and moderate sea states. The outcome of the analyses shows that tower response under multiple-point wind-field simulation results in lower responses when compared to that of single-point simulation.

• 지식경영연구
• /
• 제20권3호
• /
• pp.39-47
• /
• 2019

Response surface methodology (RSM) is a group of statistical modeling and optimization methods to improve the quality of design systematically in the quality engineering field. Its final goal is to identify the optimal setting of input variables optimizing a response. RSM is a kind of knowledge management tool since it studies a manufacturing or service process and extracts an important knowledge about it. In a real problem of RSM, it is a quite frequent situation that considers multiple responses simultaneously. To date, many approaches are proposed for solving (i.e., optimizing) a multi-response problem: process capability function approach, desirability function approach, loss function approach, and so on. The process capability function approach first estimates the mean and standard deviation models of each response. Then, it derives an individual process capability function for each response. The overall process capability function is obtained by aggregating the individual process capability function. The optimal setting is given by maximizing the overall process capability function. The existing process capability function methods usually use the arithmetic mean or geometric mean as an aggregation operator. However, these operators do not guarantee the Pareto optimality of their solution. Moreover, they may bring out an unacceptable result in terms of individual process capability function values. In this paper, we propose a maximin-based process capability function method which uses a maximin criterion as an aggregation operator. The proposed method is illustrated through a well-known multiresponse problem.