• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.200-205
• /
• 1996

Recently, in order to achieve high flexibility of manufacture, monitoring and control strategies cf a new type have been developed. Since the generation of built-up edge on the cutting tool damages the surface finish of the workpiece, the monitoring system of built-up edge is an important process monitoring. In this study, the analyzing methods of cutting force signal to detect the built-up edge during cutting process are described. The cutting force signals are analyzed using the mean, standard deviation and mean to standard deviation of this cutting signals. We can obtain the guide to detect the built-up edge during turning process.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1288-1296
• /
• 2016

The reliable detection of the limited defect in TFT-LCD images is difficult due to the small intensity difference with the background. However, the proposed detection method reliably detects the limited defect by enhancing the TFT-LCD image based on the cumulative histogram and then detecting the defect through the mean and standard deviation of the enhanced image. Notably, an image enhancement using a cumulative histogram increases the intensity contrast between the background and the limited defect, which then allows defects to be detected by using the mean and standard deviation of the enhanced image. Furthermore, through the comparison with the histogram equalization, we confirm that the proposed algorithm suppresses the emphasis of the noise. Experimental comparative results using real TFT-LCD images and pseudo images show that the proposed method detects the limited defect more reliably than conventional methods.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.67-72
• /
• 1997

Recently, in order to achieve high flexibility of manufacture, monitoring and control strategies of a new type have been developed. Since the generation of built-up edge on the cutting tool damages the surface finish of the workpiece, the monitoring system of built-up edge is an important process monitoring. In this study, the analyzing methods of cutting force signal to detect the built-up edge during cutting process are described. The cutting force signals are analyzed using the mean, standard deviation and mean to standard deviation of this cutting signals. We can obtain the guide to detect the built-up edge during turning process.

• 전자공학회논문지
• /
• 제53권1호
• /
• pp.107-117
• /
• 2016

TFT-LCD 영상에서 평균과 표준편차를 이용한 STD 결함 검출 방법은 실제 많은 검사 시스템에 활용되고 있다. STD방법은 문턱 값에 따라 검출 결과가 매우 의존적인 문제가 있다. 본 논문에서는 신뢰도 높은 결함 검출을 위해 영상에 따른 적응적 문턱 값을 사용한 STD 방법을 제안한다. 제안 방법에서는 문턱 값을 영상의 휘도 분포와 정규 분포의 유사도를 나타내는 비대칭도(Skewness)를 이용하여 적응적으로 결정한다. 실험을 통해 적응적 문턱 값을 사용한 STD 방법은 다양한 결함을 포함한 영상에 대해 일관성 있는 검출 결과를 나타내어 제안한 방법의 타당성을 확인할 수 있었다.

• 한국보건간호학회지
• /
• 제25권2호
• /
• pp.255-265
• /
• 2011

Purpose: The study investigated the knowledge and actual condition of sexuallytransmitted diseases(STD) in Mongoloian. Method: Data from 210 Mongolians were collected for 6days from August 10-15, 2008 using a questionnaire translated by Mongolians to identify the knowledge of STD and with permission, analysis of blood and human immuno deficiency virus(HIV) by SD Bioline Syphilis 3.2 test and SD Bioline HIV-1/2 3.0 test respectively. The data was scored by mean ${\pm}$ standard deviation. Differences were evaluated according to the subjects' general characteristics by t-test and the ANOVA. Results: The average knowledge score concerning STD 48.99(${\pm}.19$) indicated a low level of knowledge. STD was detected in six(2.9%) and HIV was four(1.9%) of the 210 subjects. General characteristics significantly different knowledge level were gender(t=-3.098, p=.002), education(F=6.090, p=.003), type of employment(F=2.443, p=.049), and sexual education experience(F=5.604, p=.004). Conclusion: Education programs to increase STD awareness and its prevention must be developed and regular health evaluations for those already have sexual transmitted disease is needed.

• 한국해양공학회지
• /
• 제31권2호
• /
• pp.81-90
• /
• 2017

The 1MW OTEC (Ocean Thermal Energy Conversion) platform was designed for application in equatorial seas. In this study, the OTEC platform was investigated using numerical and experimental methods. An octagon-shaped OTEC platform was investigated using the Ocean Engineering Basin of KRISO. These experiments included various tests of regular waves, irregular waves and irregular waves with current (wave+current). The responses of the platform in regular waves showed good agreement between the numerical and experimental results, including the motion RAO, wave run up, and mean drift force. The peak period of heave and pitch motions were observed around 0.5 rad/s, and the effect of the total reflection was found under short wave conditions. The standard deviation (STD) of the platform motion was checked in irregular waves of equatorial and Hawaiian seas. The STD of the pitch was less than $4^{\circ}$ different from the operability requirement under equatorial conditions and the surge STD of the wave frequency showed good agreement between the numerical and experimental results. The STD values of the surge and pitch were increased 66.6% and 92.8% by the current effects in irregular waves, but the pitch STD was less than $4^{\circ}$ under equatorial conditions. This study showed that the STD of the surge was affected by spring effects. Thus, the watch circle of the platform and tension of the mooring lines must be evaluated for a specific design in the future.

• 융합신호처리학회논문지
• /
• 제12권3호
• /
• pp.163-168
• /
• 2011

본 논문은 감마보정을 위한 비선형 곡선 알고리즘의 개선에 관한 연구이다. 기존의 비선형 감마 곡선 생성 방법은 Gauss-Jordan 역행렬을 적용한 최소 자승 다항식(Least Square Polynomial)을 사용하였다. 이 방법은 다항식 계수 값 계산 과정 중 고차행렬의 역행렬 연산에서 $10^{-11}$ 이하의 매우 작은 값은 절단함으로써 곡선접합의 정밀도가 감소된다. 또한 입력으로 사용되는 샘플 포인트가 10-bit 기준으로 0~1023의 밝기 값에 대하여 고루 분포되어있는 경우에만 정확한 동작이 가능하다. 본 논문은 이러한 기존 알고리즘의 단점을 보완하기 위하여, 고차 다항식의 계수 값을 반데몬드 행렬(Vandemond Matrix)에 SVD분해(Singular Value Decomposition)와 QR분해법(QR Decomposition)을 적용하여 행렬의 고유치와 직교성분만으로 연산하였다 또한, 입력 데이터의 구간을 분할하여 각 구간의 다항식을 생성하고, 새롭게 생성된 다항식을 이용하여 곡선 접합을 수행하도록 하였다. 입력 데이터와 곡선 접합결과의 평균제곱오차(Mean Square Error: MSE)와 표준편차(Standard Deviation: STD)를 통한 오차율 비교 결과 최하위 비트(Least Significant Bit: LSB) 에러 범위에서 MSE가 약 $10^{-9}$ 이고 STD는 약 $10^{-5}$로 정밀도가 향상되었다.

• 대한약침학회지
• /
• 제18권1호
• /
• pp.44-55
• /
• 2015

Objectives: Scolopendra subspinipes mutilans (S. subspinipes mutilans) is known as a traditional medicine and includes various amino acids, peptides and proteins. The amino acids in the pharmacopuncture extracted from S. subspinipes mutilans by using derivatization methods were analyzed quantitatively and qualitatively by using high performance liquid chromatography (HPLC) over a 12 month period to confirm its stability. Methods: Amino acids of pharmacopuncture extracted from S. subspinipes mutilans were derived by using O-phthaldialdehyde (OPA) & 9-fluorenyl methoxy carbonyl chloride (FMOC) reagent and were analyzed using HPLC. The amino acids were detected by using a diode array detector (DAD) and a fluorescence detector (FLD) to compare a mixed amino acid standard (STD) to the pharmacopuncture from centipedes. The stability tests on the pharmacopuncture from centipedes were done using HPLC for three conditions: a room temperature test chamber, an acceleration test chamber, and a cold test chamber. Results: The pharmacopuncture from centipedes was prepared by using the method of the Korean Pharmacopuncture Institute (KPI) and through quantitative analyses was shown to contain 9 amino acids of the 16 amino acids in the mixed amino acid STD. The amounts of the amino acids in the pharmacopuncture from centipedes were 34.37 ppm of aspartate, 123.72 ppm of arginine, 170.63 ppm of alanine, 59.55 ppm of leucine and 57 ppm of lysine. The relative standard deviation (RSD %) results for the pharmacopuncture from centipedes had a maximum value of 14.95% and minimum value of 1.795% on the room temperature test chamber, the acceleration test chamber and the cold test chamber stability tests. Conclusion: Stability tests on and quantitative and qualitative analyses of the amino acids in the pharmacopuncture extracted from centipedes by using derivatization methods were performed by using HPLC. Through research, we hope to determine the relationship between time and the concentrations of the amino acids in the pharmacopuncture extracted from centipedes.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.70-78
• /
• 2004

This paper presents study of efficiency of wavelet transformation for on-line chatter detection during hard fuming process. From comparison with other time series and statistical methods such as fast fourier transformation (FFT), Kurtosis and standard deviation (STD), wavelet transform is better than others in on-line chatter detection. With using wavelet function with pseudo frequency corresponding to chatter frequency, chatter could be detected more sensitively. And for both force signal from dynamometer and displacement signal from capacitance type cylindrical sensor (CCS), wavelet transform with DB2 function on level 4 could be well used for chatter detection in hard turning process.

• 에너지공학
• /
• 제22권2호
• /
• pp.197-204
• /
• 2013

A cyclic variability has long been recognized as limiting the range of operating conditions of spark ignition engines, in particular, under idling conditions. The coefficient of variation (COV) in indicated mean effective pressure (IMEP) defines the cyclic variability in indicated work per cycle, and it has been found that vehicle drivability problems usually result. For analysis of the cyclic variations in spark ignition engines at idling, the results show that cyclic variability by the COV, COV of IMEP, the lowest normalized value (LNV), and burn angles can help to design the spark ignition engine.