• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.634-644
• /
• 2009

A diversity of wireless networks, with rapidly evolving wireless technology, are currently in service. Due to their innate physical layer vulnerability, wireless networks require enhanced security components. WLAN, WiBro, and UMTS have defined proper security components that meet standard security requirements. Extensive research has been conducted to enhance the security of individual wireless platforms, and we now have meaningful results at hand. However, with the advent of ubiquitous service, new horizontal platform service models with vertical crosslayer security are expected to be proposed. Research on synchronized security service and interoperability in a heterogeneous environment must be conducted. In heterogeneous environments, to design the balanced security components, quantitative evaluation model of security policy in wireless networks is required. To design appropriate evaluation method of security policies in heterogeneous wireless networks, we formalize the security properties in wireless networks. As the benefit of security protocols is indicated by the quality of protection (QoP), we improve the QoP model and evaluate hybrid security policy in heterogeneous wireless networks by applying to the QoP model. Deriving relative indicators from the positive impact of security points, and using these indicators to quantify a total reward function, this paper will help to assure the appropriate benchmark for combined security components in wireless networks.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.20-25
• /
• 2006

In the design of class 1 components to apply ASME code section III NB, a fatigue is considered as one of the important failure mechanisms. Fatigue analysis procedure and standard fatigue design curve(S-N curve) is suggested in ASME code, which had to be performed to meet the integrity of components at the design step. As the plant life extension for operating power plants and the long-lived plant design, however, are being progressed, the fact which the existing ASME fatigue design curve can not consider fatigue effects sufficiently comes to the fore. To find the technical solution for these problems, a number of researches and discussion are continued up to now. In this study, the detailed fatigue analyses using the 3 dimensional modeling for the fatigue-weakened components were performed to develop the optimized fatigue analysis procedure and their results are compared with other reference solutions.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.355-362
• /
• 2004

The purpose of this study was to herd management and control of dairy cows by milk components analysis in Gyeongsangnamdo. Milk components analysis were carried out milk yield (MY), milk fat (MF), milk protein (MP), milk urea nitrogen (MUN) and somatic cell count (SCC) but, milk solid (MS), day of non-pregnant condition (DNPC), and days of primipara (DPRI) involved in report. Dairy farms were divided high group, middle group, low group according to the standard records for milk components. Examination records were divided by farm, parity, year, season and month, the number of samples were 28,957. Feeding management practice and the prediction for the risk possibility of productive disease such as reproductive and metabolic disorders by evaluating fat, protein, solids. Determination of MY, MF, MP, MS were Milkoscan 4,000~5,000 Serier (FOSS Electric Co., Copenhagen, Denmark). Correlation coefficient of milk protein (MP) and milk solid (MS) was ascertain r=0.759. SCC was ascertain 372.8$\pm$11.34 (thousand unit) and DNPC was ascertain 155.3$\pm$5.15 (days) in seven parity.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.53-59
• /
• 2010

A fatigue damage caused by cyclic load is considered as one of the important failure mechanisms that threaten the integrity of structures and components in a nuclear power plant. In ASME code section III NB, the fatigue analysis procedure and standard S-N curves for the class 1 components are described and these criteria should be met at the design step of components. As the current ASME S-N curves are based on the very conservative assumptions such as a local stress concentration effect, immoderate transient frequencies and a constant Young's modulus, however, they can not precisely address the fatigue behavior of components. In order to find out the technical solution for these problems, a number of researches and discussion have been carried out continuously at home and abroad over the decades. In this study, detailed fatigue analyses for DVI nozzle with various mesh density of finite elements were performed to evaluate effect of stress concentration factors on the fatigue analysis procedure and the excessive conservatism of stress concentration factors are confirmed through the analysis results.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1346-1354
• /
• 2018

Quality of the power system depends upon the reliability of its components such as transformer, transmission lines, insulators, circuit breakers and isolators. The transient voltage due to internal or external reasons may affect the insulation level of the components. The insulation level of these components must be tested against these conditions. Different studies, testing of different electrical components against high voltage impulses and different industrial applications rely on the international manufactures for pulsed power generation and testing, that is quite expensive and large in size. In this paper a model of impulse voltage generator with capacitive load of pin type insulator is studied by simulation method and by an experimental setup. A ten stage high voltage impulse generator (HVIG) is designed and implemented for different applications. In this proposed model, the cost has been reduced by using small and cheap capacitors as an alternative for large and expensive ones while achieving the same effectiveness. Effect of the distributed capacitance in each stage is analyzed to prove the effectiveness of the model. Different values of front and tail resistances have been used to get IEC standard waveforms. Results reveal the effectiveness at reduced cost of the proposed model.

• Advances in materials Research
• /
• v.2 no.4
• /
• pp.181-193
• /
• 2013

Description and theory of spin coating technique has been elaborately outlined and a spin coating machine designed and fabricated using affordable components. The system was easily built with interdisciplinary knowledge of mechanics, fluid mechanics and electronics. This equipment employs majorly three basic components and two circuit units in its operation. These include a high speed dc motor, a proximity sensor mounted at a distance of about 15 mm from a reflective metal attached to the spindle of the motor to detect every passage of the reflective metal at its front and generate pulses. The pulses are transmitted to a micro-controller which process them into rotational speed (revolution per minute) and displays it on a lead crystal display (LCD) which is also a component of the micro-controller. The circuit units are a dc power supply unit and a PWM motor speed controlling unit. The various components and circuit units of this equipment are housed in a metal casing made of an 18 gauge black metal sheet designed with a total area of 1, $529.2cm^2$. To illustrate the use of the spin-coating system, ZnO sol-gel films were prepared and characterized using SEM, XRD, UV-vis, FT-IR and RBS and the result agrees well with that obtained from standard equipment and a speed of up to 9000 RPM has been achieved.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.7-14
• /
• 1994

This study was conducted to establish the rapid evaluation method of chemical components of rice grain on the basis of non-destructive method. A near-infrared reflectance spectroscopic(NIRS) method was utilized, for the determination of amylose, protein, magnesium, and potassium content of rice. A multiple linear regression analysis for the data obtained by standard laboratory methods and NIRS method was carried out to make a calibration. The standard error of prediction for amylose, protein, magneisum and potassium content were 0.88%, 0.28%, 12.62mg and 10.79mg, respectively. It was concluded that the NlRS method can be useful the rapid determination of amylose, protein, magnesium and potassium content instead of the existing laboratory method.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.51-60
• /
• 2004

In open GIS environment, a GIS client can access spatial data in different types of GIS sowers with the same Interfaces. This means that open GIS components software ensures the interoperability throughout the heterogeneous GIS servers. The user response time, however, tends to be increased, if the client makes use of the standard interfaces for data accesses that can ensure interoperability. This is because the format of spatial data accessed from a specific GIS server must be transformed into common format, such as Rowset in OLE/DB, which is compatible with the standard interfaces. In this paper, we develop efficient techniques for data buffering in GIS client to reduce the response time. We design the buffer management method, which Is based on the space partitioning, and Integrate buffer management components into MapBase, an open GIS component software. And we also, show that buffer management proposed in this paper yields significant performance improvement in GIS client.

• Korean Journal of Pharmacognosy
• /
• v.36 no.2 s.141
• /
• pp.75-80
• /
• 2005

This study is concerning to identify the hygienic problems occurring in processing, storage, and distribution of Rehmanniae radix crude, and to investigate the possibility of application of safe and hygienic ${\gamma}-irradiation$ techniques. The results are as follows. To compare the contents of catapol, index compound of Rehmanniae Radix crude, between before and after ${\gamma}-irradiated$,0,2.5,5,7.5,10,12.5,15,20, and 30 kGy of ${\gamma}-irradiation$ was applied to standard catapol and Rehmanniae radix crude. The contents of catapol in standard material and Rehmanniae radix crude were decreased with the increase of ${\gamma}-irradiation$ level. However, active components of Rehmanniae Radix crude were not changed with ${\gamma}-irradiation$. These results indicate that active components of Rehmanniae Radix crude were preserved after ${\gamma}-irradiation$ and those of Rehmanniae Radix crude did not showed significant change after irradiation of ${\gamma}-ray$ up to 20 kGy.

• Journal of Satellite, Information and Communications
• /
• v.8 no.3
• /
• pp.52-57
• /
• 2013

This paper describes the color comparison analysis of flame in each standard color model in order to propose the optimal color model for image processing based flame detection algorithm. Histogram intersection values were used to analyze the separation characteristics between color of flame and color of non-flame in each standard color model which are RGB, YCbCr, CIE Lab, HSV. Histogram intersection value in each color model and components is evaluated for objective comparison. The analyzed result shows that YCbCr color model is the most suitable for flame detection by average HI value of 0.0575. Among the 12 components of standard color models, each Cb, R, Cr component has respectively HI value of 0.0433, 0.0526, 0.0567 and they have shown the best flame separation characteristics.