• Journal of Elementary Mathematics Education in Korea
• /
• v.14 no.2
• /
• pp.287-314
• /
• 2010

The algorithm is a chain of mechanical procedures, capable of solving a problem. In modern mathematics educations, the teaching algorithm is performing an important role, even though contracted than in the past. The conspicuous characteristic of current elementary mathematics textbook's manner of manipulating multiplication algorithm is exceeding converge to 'standard algorithm.' But there are many algorithm other than standard algorithm in calculating multiplication, and this diversity is important with respect to didactical dimension. In this thesis, we have reconstructed the experimental learning and teaching plan of multiplication algorithm unit by making the best use of diversity of multiplication algorithm. It's core contents are as follows. Firstly, It handled various modified algorithms in addition to standard algorithm. Secondly, It did not order children to use standard algorithm exclusively, but encouraged children to select algorithm according to his interest. As stated above, we have performed teaching experiment which is ruled by new lesson design and analysed the effects of teaching experiment. Through this study, we obtained the following results and suggestions. Firstly, the experimental learning and teaching plan was effective on understanding of the place-value principle and the distributive law. The experimental group which was learned through various modified algorithm in addition to standard algorithm displayed higher degree of understanding than the control group. Secondly, as for computational ability, the experimental group did not show better achievement than the control group. It's cause is, in my guess, that we taught the children the various modified algorithm and allowed the children to select a algorithm by preference. The experimental group was more interested in diversity of algorithm and it's application itself than correct computation. Thirdly, the lattice method was not adopted in the majority of present mathematics school textbooks, but ranked high in the children's preference. I suggest that the mathematics school textbooks which will be developed henceforth should accept the lattice method.

• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.343-349
• /
• 2010

Rapid on-site sensing of nitrate-nitrogen and potassium ions in hydroponic solution would increase the efficiency of nutrient use for greenhouse crops cultivated in closed hydroponic systems while reducing the potential for environmental pollution in water and soil. Ion-selective electrodes (ISEs) are a promising approach because of their small size, rapid response, and the ability to directly measure the analyte. The capabilities of the ISEs for sensing nitrate and potassium in hydroponic solution can be affected by the presence of other ions such as calcium, magnesium, sulfate, sodium, and chloride in the solution itself. This study was conducted to investigate the applicability of two ISEs consisting of TDDA-NPOE and valinomycin-DOS PVC membranes for quantitative determinations of $NO_3$-N and K in hydroponic solution. Nine hydroponic solutions were prepared by diluting highly concentrated paprika hydroponic solution to provide a concentration range of 3 to 400 mg/L for $NO_3$-N and K. Two of the calibration curves relating membrane response and nutrient concentration provided coefficients of determination ($R^2$) > 0.98 and standard errors of calibration (SEC) of < 3.79 mV. The use of the direct potentiometry method, in conjunction with an one-point EMF compensation technique, was feasible for measuring $NO_3$-N and K in paprika hydroponic solution due to almost 1:1 relationships and high coefficients of determination ($R^2$ > 0.97) between the levels of $NO_3$-N and K obtained with the ion-selective electrodes and standard instruments. However, even though there were strong linear relationships ($R^2$ > 0.94) between the $NO_3$-N and K concentrations determined by the Gran's plot-based multiple standard addition method and by standard instruments, hydroponic $NO_3$-N concentrations measured with the ISEs, on average, were about 10% higher than those obtained with the automated analyzer whereas the K ISE predicted about 59% lower K than did the ICP spectrometer, probably due to no compensation for a difference between actual and expected concentrations of standard solutions directly prepared.

• Food Science of Animal Resources
• /
• v.31 no.5
• /
• pp.658-662
• /
• 2011

In this study, 543 samples of press hams, sausages, processed ground meat and processed cheese acquired from retail markets in Seoul and Gyeonggi province in Korea from 2005 to 2010 were monitored using a one-step multiplex polymerase chain reaction (PCR) method that involves the amplification of specific soya or maize endogenous genes and the amplification of 35S promoter (p35S) and nopaline synthase terminator (tNOS) for GMO detection. Among the 543 samples, 477 samples were amplified for maize and/or soybean endogenous genes. Although one sausage sample collected in 2008 showed amplification of tNOS, the result was assumed to be false positive based on the results from further tests of other sausage samples of the same brand. Our results demonstrate the absence of GM soya and/or maze of livestock products in the Korean market during 2005-2010. In addition, the one-step multiplex PCR using previously constructed primer sets appears to be useful as a screening method for the detection of GMOs in processed livestock products. However, more specific methods should be established and employed to detect the event-specific GM gene for positive reaction samples by screening tests in processed livestock products.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.203-208
• /
• 2008

The purpose of the study is to establish the concept of residential standard, and at the same time to investigate the area of the minimum residential standard in the countries of the world through the preceding studies. In addition, it also aims at establishing the objective residential standard by comparing the residential standard of Korea with that of foreign countries, examining the problems and finding out the matters to be improved through the comparison of the residential standard in advanced countries with the minimum residential standard of Korea. The standard residential area, derived from the process of examining the minimum residential standard, will be used as the basic material for the calculation of the reasonable area in the surface plan for the study of low-cost housing development. The method of the study is to establish the concept of residential standard and at the same time to find out the problems in the minimum residential standard of Korea and improvement methods through the comparison of the residential standards in other countries. As the result of the studies focused on the area among the residential standards, it is found out that the Korea's residential area per capita is established as the least in comparison with that of advanced countries. The real area decided depending on the size of social space suitable for living can play a role in improving the degree of satisfaction in the person's living in the residential area. Therefore, it is urgently necessary to make a depth study on the surface area of the minimum residential standard, and it is also required to propose the residential standard and directions for the improvement of the qualitative level rather the quantitative expansion of residential structures.

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.1-17
• /
• 2018

This study analyzes the management performance of environmentally-friendly rice farms using GCM method based on the multifaceted approach. This approach compares the management performance of GCM farms before and after the introduction of GCM, as well as the performance of GCM farms with the performance of conventional farms. It also compares the technical and managerial competence level of surveyed GCM farms with that of conventional farms based on the standard diagnosis table developed by Rural Development Adminstration. Results showed that average income has increased after the introduction of the GCM method and the average income of GCM farms was higher than that of conventional farms, while the level of rice production in farms using GCM method was lower than that of conventional farms. In addition, the technical and managerial competence score of surveyed farms using GCM method was higher than that of conventional farms. These results implies that the higher management performance of GCM farms compared to the conventional farms is attributed to not only the GCM method but also the competence level of farms using GCM method.

• Korean Journal of Microbiology
• /
• v.36 no.3
• /
• pp.242-248
• /
• 2000

Since the official allowance of bottled water at Korean domestic market in 1995, Pseudomo~zas aemginosu has been detected from 2.3% and 1.2% of source and products of bottled water sa~nple tested, respectively. according to the nation-wide dala froin May 1995 to December 1996. Therefore, P aeivginosa was the second most important parameter, next to colifoi~ns, anlong the bacieriological parameters regulated for bonled water. The official standard method initially adopted the Japanese officlal method and Standard Methods of the US, w~hich is using aspai-agiii-acetamid mnedia(A-A method). how eve^; the method showed low specificity regardless of the high sensitivity. The $42^{\circ}C$ growth test was the best biochemical featu1-e differentiating the P uelarginosu 6-om P aei-uginosa-like species such as P puririir and P Jhoi.escens amo1zg the other characierisiics such as fluorescence pigment_ pyocyanin, casein hy&olysis, etc. Thel-efore, addition of the $42^{\circ}C$ growth Lest in advance ofthe biochemical identification test, when sainple is positive by A-A method, should strengthen the spec~IiclQ w~tli ~ninin~um addition of testing load.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.891-898
• /
• 2022

Purpose: There is not much time left for mandatory BIM implementation for all sectors and stages of the construction industry. Therefore, it is necessary to find a way to secure technology to substantially improve the productivity of BIM work. In the research, we proposed a method to automatically verify related construction standards for major objects produced by BIM modeling procedures so that engineers can verify construction standards in the BIM-based design process. Method: We defined a modeling work procedure for BIM-based road design work and prepared a method for constructing related design standards in a database. In addition, a process map for developing a BIM-based design basis review automation system was also presented. Result: A BIM-based design standard review automation module was developed using Civil3D and Dynamo. And it was confirmed by the test application that it is possible to quickly judge whether the BIM object manufactured in the design process conforms to the construction design standard. Conclusion: BIM-based design standard review automation technology can improve the productivity of BIM model production work and secure the quality of the BIM model.

• Nuclear Engineering and Technology
• /
• v.19 no.4
• /
• pp.242-248
• /
• 1987

A sensitive, direct method for the determination of trace amounts of uranium in solution has been developed utilizing laser-induced fluorescence spectroscopy and a fluorescence enhancing reagent 'Fluran.' Standard addition technique is incorporated into the analysis to eliminate sample matrix effects. Analytical data show that a detection limit of 0.1 ppb (part per billion) uranium has been achieved and the precision of the analysis is in the range of 5% relative standard deviation. Results using the laser fluorescence method on many sets of unknown samples have been compared against corresponding values determined by other methods.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.91-98
• /
• 2015

This paper has proposed a reinforcing method for damaged RC columns with SRF sheets and Aramid rods. In order to verify the effectiveness and performance, two original columns and two reinforced columns with SRF sheets and Aramid rods were developed and tested under lateral cyclic displacement and a constant axial load. The test showed that the improvement of energy dissipation capacity was increased in terms of strength and ductility. In addition, an analytical modeling of the standard specimens was proposed using Response-2000 and ZeusNL program. The results of analytical and experimental studies for two standard columns were compared in terms of loading-displacement curve and energy dissipation capacity based on the nonlinear static analysis.

• YAKHAK HOEJI
• /
• v.47 no.6
• /
• pp.352-355
• /
• 2003

Voglibose is a new antidiabetic agent currently being devoloped by the research and development division of Takeda chemical industries Ltd. in japan. Basic research for the determination of voglibose in pharmaceutical preparation by gas chromatography. This method utilizes voglibose to give its acyl compound with acetyl anhydride in pyridine solution. The calibration curve for voglibose was linear over the concentration range of 0.08∼0.32 $\mu\textrm{g}$/${mu}ell$ with correlation coefficient of 0.996. The detection limit for voglibose was 0.016 $\mu\textrm{g}$/${mu}ell$ and the result of recovery test was 101.6% with relative standard deviation of 2.0% by standard addition method.