• 제목/요약/키워드: stable surface water supply

검색결과 20건 처리시간 0.025초

표층수의 월류를 통한 소수력빌전소 수차터빈측의 유동안정화 연구 (Studies on the flow stabilization around the turbine suction with utilizing the surface water overflow at small-hydraulic power plant)

  • 이성명;김철환;유근종;김원석
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 추계학술대회 초록집
    • /
    • pp.165.2-165.2
    • /
    • 2011
  • Flow with suction to water turbine must be in stable state at small hydraulic power plant. But because of water level fluctuation and water gate effect according to irregular supply of cooling water, it would happen to produce bubble and vortex and finally lead to problems in power-plant system. With utilizing the concept design of double size gate, surface water overflowed the overhead of gate for stable flow at suction. We developed the overflow condition and analyzed the design factor with existed one such as water level(overflow amount) and overhead of water gate(overflow figure). Flow test and CFD simulation say that flow have stable state around suction and 20% of wave reduction effect at surface layer after surface water overflow.

  • PDF

Evaluation of flux stabilisation using Bio-UF membrane filter on KZN Rivers, South Africa

  • Thoola, Maipato I.;Rathilal, Sudesh;Pillay, Lingam V.
    • Membrane and Water Treatment
    • /
    • 제7권4호
    • /
    • pp.313-325
    • /
    • 2016
  • South Africa recognises piped water as the main source of safe drinking water supply. Remote areas do not have access to this resource and they rely solely on surface water for survival, which exposes them to waterborne diseases. Interim point of use solutions are not practiced due to their laboriousness and alteration of the taste. Bio-ultra low pressure driven membrane system has been noted to be able to produce stable fluxes after one week of operation; however, there is limited literature on South African waters. This study was conducted on three rivers namely; Umgeni, Umbilo and Tugela. Three laboratory systems were setup to evaluate the performance of the technology in terms of producing stable fluxes and water that is compliant with the WHO 2008 drinking water guideline with regards to turbidity, total coliforms and E.coli. The obtained flux rate trends were similar to those noted in literature where they are referred to as stable fluxes. However, when further comparing the obtained fluxes to the normal dead-end filtration curve, it was noted that both the Umbilo and Tugela Rivers responded similarly to a normal dead-end filtration curve. The Umgeni River was noted to produce flux rates which were higher than those obtainable under normal dead-end. It can be concluded that there was no stabilisation of flux noted. However, feed water with low E.coli and turbidity concentrations enhances the flux rates. The technology was noted to produce water of less than 1 NTU and 100% removal efficiency for E.coli and total coliforms.

세라믹 막여과의 성능향상을 위한 응집 전처리의 적용 (Application of coagulation pretreatment for enhancing the performance of ceramic membrane filtration)

  • 강준석;송지영;박서경;정아영;이정준;서인석;채선하;김성수;김한승
    • 상하수도학회지
    • /
    • 제31권6호
    • /
    • pp.501-510
    • /
    • 2017
  • In this study, it is estimated that ceramic membrane process which can operate stably in harsh conditions replacing existing organic membrane connected with coagulation, sedimentation etc.. Jar-test was conducted by using artificial raw water containing kaolin and humic acid. It was observed that coagulant (A-PAC, 10.6%) 4mg/l is the optimal dose. As a results of evaluation of membrane single filtration process (A), coagulation-membrane filtration process (B) and coagulation-sedimentation-membrane filtration process (C), TMP variation is stable regardless of in Flux $2m^3/m^2{\cdot}day$. But in Flux $5m^3/m^2{\cdot}day$, it show change of 1-89.3 kpa by process. TMP of process (B) and (C) is increased 11.8, 0.6 kpa each. But, the (A) showed the greatest change of TMP. When evaluate (A) and (C) in Flux $10m^3/m^2{\cdot}day$, TMP of (A) stopped operation being exceeded 120 kpa in 20 minutes. On the other hand, TMP of (C) is increased only 3 kpa in 120 minutes. Through this, membrane filtration process can be operated stably by using the linkage between the pretreatment process and the ceramic membrane filtration process. Turbidity of treated water remained under 0.1 NTU regardless of flux condition and DOC and $UV_{254}$ showed a removal rate of 65-85%, 95% more each at process connected with pretreatment. Physical cleaning was carried out using water and air of 500kpa to show the recovery of pollutants formed on membrane surface by filtration. In (A) process, TMP has increased rapidly and decreased the recovery by physical cleaning as the flux rises. This means that contamination on membrane surface is irreversible fouling difficult to recover by using physical cleaning. Process (B) and (C) are observed high recovery rate of 60% more in high flux and especially recovery rate of process (B) is the highest at 95.8%. This can be judged that the coagulation flocs in the raw water formed cake layer with irreversible fouling and are favorable to physical cleaning. As a result of estimation, observe that ceramic membrane filtration connected with pretreatment improves efficiency of filtration and recovery rate of physical cleaning. And ceramic membrane which is possible to operate in the higher flux than organic membrane can be reduce the area of water purification facilities and secure a stable quantity of water by connecting the ceramic membrane with pretreatment process.

수냉식변압기 냉각튜브의 부식특성 평가에 관한 연구 (A Study on Evalution of Corrosion Properties in cooling tube of water cooling transformers)

  • 정년호;민병연;박현주
    • Corrosion Science and Technology
    • /
    • 제9권5호
    • /
    • pp.216-222
    • /
    • 2010
  • Most of the thirteen substations in operation in the metropolitan area were installed around the year 2000, and since water cooling methods are used to directly withdraw heat from transformer oils, a stable supply of electric power is required through optimal maintenance of facilities. The water cooling tower installed outdoors, which uses the water supply as sprinkler water, experiences the most problems. Since more than 90% of the cooling water is reused, the dissolved composition in the water becomes concentrated due to long operating hours, and impurities dissolve in the water due to air flowing in from the outside, forming hard scales on the outer surface of the cooling tube, and in extreme cases, reacting with the tube material composition, leading to corrosion. As a result, not only is cooling efficiency lowered, but in extreme cases the cooling tube must be replaced. In this study, the characteristics and composition of the scales formed on the cooling tube were analyzed and corrosion characteristics of material types were identified in order to find an efficient maintenance method for cooling tubes. In addition, the degree of dissolution of various chemicals were investigated during the removal of scales that have been formed.

하천유량에 기여하는 지하수 양수량의 물공급 능력 평가 (Evaluation of water supply capacity using groundwater abstraction contributing to streamflow)

  • 정일문;김남원;이정우;장선우
    • 한국수자원학회논문집
    • /
    • 제50권12호
    • /
    • pp.889-896
    • /
    • 2017
  • 본 연구에서는 무심천 유역을 대상으로 지표수-지하수 통합해석 모형인 SWAT-MODFLOW를 이용하여 수량이 부족한 하천으로 지하수를 이용한 물공급 방안을 모색하였다. 2011년부터 2015년까지 다양한 모의실험을 수행한 결과 극한가뭄이 도래했던 2015년에 지하수 공급에 의한 월 유출량의 변화는 현 양수시 23%, 최대 양수시에는 68.3%의 증가를 나타냈다. 이를 연간 지하수 함양량으로 산정할 경우 현 이용량을 적용하면 연평균 강수량의 6.2%인 75 mm, 최대 이용량 적용시 연평균 강수량의 24%인 290 mm에 해당하여 연간 안정적인 공급이 가능한 것으로 나타났다. 본 연구는 가뭄에 취약한 지표수자원과 달리 지하수는 하천수 부족시 물공급의 효과적인 대안이 될 수 있을 것으로 판단된다.

도시하천 류축경의 시각적 선호요소 분석 (Analysis on Visual Preference Elements of Riverscape Axis)

  • 김용수;정계순;김수봉
    • 한국조경학회지
    • /
    • 제26권2호
    • /
    • pp.101-109
    • /
    • 1998
  • Recently, improvement of the quality of urban riverscape environment has been emphasized not only by landscape architectural field but also by various professionals in planning and ecology. Regarding to this current movement, the aim of this paper is to highlight major visual elements of riverscape axis as a case study of Shinchon River in Taegu City to suggest some basic guidelines for arranging riverscape in urban area. The study was mainly based on Repertory Grid Development method which was developed in Japan. The method is consist of three steps such as decision of element landscape in study area for slide photos, selection of evaluation items for interview and obstraction of proper evaluation factors. The major findings through this study are as follows; 1) The 12 major visual elements which possibly improve riverscape, based on abstraction of proper evaluation factors, are Dunchi, surface of the water,, equipment of river, buildings near riverside, river vertical and horizontal facilities like bridge, fine view, riverbed, water plant, naturalness, water's edge line, harmony and street trees by order. 2) Total numbers of adjective which describe 12 common factors are 25, such as clean, open, stable, quiet, comfortable, friendly, bright, natural etc. In addition, Dunchi was described 337 times by various adjectives, surface of the water was 200 times and arrangement of river was 146 times which is similar result with the order of 12 influential common factors. 3) Therefore, Dunchi, surface of the water and equipment of river are three most important factors which could create better riverscape. These three factors implies us how we supply good quality of urban river environment for the urban residents.

  • PDF

농업가뭄대응을 위한 인공함양 시스템의 함양능력 평가 (Recharge Potential Assessment of Artificial Recharge System for Agricultural Drought Adaptation)

  • 이재영;김규범
    • 한국방재안전학회논문집
    • /
    • 제14권1호
    • /
    • pp.61-72
    • /
    • 2021
  • 최근 기후변화로 인한 가뭄발생으로 국지적인 물부족 문제 해결을 위해 안정적인 지하수를 활용한 물공급 방안의 필요성이 증가하고 있으며 이에 대한 대안으로 지하수 인공함양 기술이 대두되고 있다. 본 연구에서는 기상조건 및 목표취수량, 함양정의 주입량, 주입기간 등을 고려한 함양 시나리오를 반영하여 수치모델링을 통해 인공함양-취수 시스템의 함양능력 평가와 최적 운영조건을 도출하여 가뭄발생에 대비한 농업용수의 효율적인 공급과 안정적인 용수확보를 위한 정량적인 평가기법을 도출하고자 하였다. 이에 함양정의 함양능력을 평가하기 위해 물수지 분석으로부터 도출된 목표취수량을 고려한 총 주입량 10,000 ton의 조건하에서 주입 시나리오별(Case 1~4)로 주입정 및 관측정별 지하수위 변화를 모사한 결과 주입 후 유역 내 지하수위는 약 25~42일간 유지되는 것으로 나타났다. 이 중 Case 3의 경우 지표하 1 m 미만으로 지하수위가 상승하여 적정 주입량은 50 m3/day가 적절한 것으로 모사되었으며 함양수 주입에 의한 지하수위 상승에 따른 영향범위는 113.5 m로 예측되었다. 또한 함양 시나리오에 따른 하류부 저투수성 벽체(LPB) 설치 전후의 유역내 함양능력 변화는 설치 전 대비 지하수 저류량은 약 6배가량 증가하였고 지하수 체류시간은 약 4배 정도 증가하는 것으로 모사되었다. 본 연구결과는 향후 가뭄대응을 위한 안정적인 농업용수 공급 및 지속적인 수자원 확보에 크게 기여할 것으로 기대된다.

범람/휴지식 홍수터여과에서 폐색현상 및 수질개선도 연구 (A Study on Clogging and Water Quality Improvement in Floodplain Filtration with Flood/rest Raw-water Supply)

  • 김호석;김승현
    • 대한환경공학회지
    • /
    • 제33권2호
    • /
    • pp.120-131
    • /
    • 2011
  • 하수처리장 방류수를 추가로 처리하여 하천의 수질을 개선하려는 노력의 일환으로 범람/휴지식 홍수터여과에 대한 파일럿 규모의 실험을 수행하였다. 대상토양은 낙동강의 구미, 대구, 그리고 김해에서 얻었으며, 각 토양별로 운전경과에 따른 침투율 감소현상과 여러 침투율에서 각종 오염물질의 여과거리에 따른 제거율을 조사하였다. 실험결과 운전시간이 경과함에 따라 표층에서 폐색이 점차 발달하였고 이에 따라 침투율이 지수함수적으로 감소하였다. 표층의 폐색제거에 필요한 주기는 모든 토양에서 2주 이상이었고, 안정적인 침투율은 구미토양의 경우 5 m/day, 대구와 김해 토양의 경우에는 1 m/day이었다. 불포화대에서는 여과거리 증가에 따라 용존산소의 농도가 오히려 증가하여 범람/휴지를 번갈아 적용하는 방식이 토양을 호기환경으로 유지하는데 효과적임을 알 수 있었다. 모든 토양에서 침투율이 증가하여도 여과거리에 따른 오염제거특성은 거의 일정하였다. BOD와 탁도는 모든 토양의 여과거리 1.2 m에서 대부분 제거가 가능하였으며, COD는 3.6 m 여과에서 30% 이상 제거되었고 여과거리가 증가하면 그 제거율이 다소 향상될 것으로 예상되었다. 모든 토양의 표층부근에서 질산화반응이 진행되었으나 실험된 여과거리에서는 질소의 제거가 거의 없었다. 구미토양에서는 인 제거율이 낮았으나 다른 토양에서는 인 제거율이 상당하거나 매우 높아서 본 공법을 잘 활용하는 경우 하천수질을 크게 개선할 수 있을 것으로 기대되었다.

지열 시스템의 도입이 지중온도환경에 미치는 영향에 대한 해석적 검토 (Numerical Analysis of the Effect of Ground Source Heat Pump Systems on the Underground Temperature)

  • 남유진
    • 설비공학논문집
    • /
    • 제25권8호
    • /
    • pp.427-431
    • /
    • 2013
  • Ground heat pump systems utilize the annually stable underground temperature to supply heat for space heating and cooling. The underground temperature affects not only the underground ecosystem, but also the performance of these systems. However, in spite of the widespread use of these systems, there have been few researches on the effect of the systems on underground temperature. In this research, case studies with numerical simulation have been conducted, in order to estimate the effect of ground heat pump systems on underground temperature. The simulation was coupled with the ground water-ground heat transfer model and the ground surface heat transfer model. In the result, it was found that the underground change depends on the heat transfer from the ground surface, the heat exchange rate, and the heat conductivity of soil.

지연제 살포량과 물씻기 시간이 골재노출 콘크리트의 표면성상에 미치는 영향 (Surface Properties of Exposed-Aggregate Concrete Depending on Retarder and Water Jet Washing Timing)

  • 박준희;한천구
    • 한국건축시공학회지
    • /
    • 제15권2호
    • /
    • pp.169-175
    • /
    • 2015
  • 본 연구는 콘크리트 마감재로써 골재노출 콘크리트를 개발하기 위한 일련의 실험이다. 실험변수로는 고강도 및 일반강도의 물-시멘트비별 당류계 지연제의 살포량 및 세척시기 변화가 물씻기 공법을 이용한 골재노출 콘크리트의 품질에 미치는 영향을 분석하였다. 그 결과, 물-시멘트비 25%는 세척시점 0.75일, 물-시멘트비 35%와 55%는 1일, 65%는 1.5일에 당류계 지연제를 $24m{\ell}/m^2$ 살포하였을 때 가장 효과적이며 양호한 골재 노출의 표면이 연출되는 것을 확인할 수 있었다.