• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.104-105
• /
• 2000

High quality BSCCO thin films have been fabricated by means of an ion beam sputtering at various substrate temperatures, T$_{sub}$, and ozone gas pressures, PO$_3$. The correlation diagrams of the BSCCO phases appeared against T$_{sub}$ and PO$_3$are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi2201 and Bi2223 phases as well as Bi2212 one come out as stable phases depending on T$_{sub}$ and PO$_3$. From these results, the thermodynamic evaluations of ΔH and ΔS which are related with Gibbs'free energy change for single Bi2212 or Bi2223 phase are performed.ormed.i2212 or Bi2223 phase are performed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.15-18
• /
• 1996

Shewhart control chart is a basic technique to monitor the state of a process. We observe observations of a group of size four or five in a rational way and plot some statistics (e.g., means and ranges) on the chart. When setting up the control chart, the control limits are calculated based on preliminary 20-40 samples, which were supposedly obtained from stable operating conditions. But it may be hard to believe, especially at the beginning of constructing the chart for the first time, whether the process is stable and hence all samples were generated under the homogeneous operating conditions. In this report we suggest a mechanism to obtain robust control limits under self-criticism. When outliers are present in the sample, we obtain tighter control limits and hence increase the sensitivity of the chart. Examples will be given via simulation study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.64-68
• /
• 2001

High quality BSCCO thin films have been fabricated by means of an ion beam sputtering at various substrate temperatures, T$\_$sub/, and ozone gas pressures, PO$_3$. The correlation diagrams of the BSCCO phases appeared against T$\_$sub/ and PO$_3$ are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi2201 and Bi2223 phases as well as Bi2212 one come out as stable phases depending on T$\_$sub/ and PO$_3$. From these results, the thermodynamic evaluations of ΔH and ΔS, which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase are performed.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.5
• /
• pp.80-87
• /
• 2002

In this study, CT specimens were prepared from spring steel(SUP9) which was used in suspension of automobile for room temperature and low temperature service. We got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, ­3$0^{\circ}C$, ­5$0^{\circ}C$, ­7$0^{\circ}C$ and ­10$0^{\circ}C$ in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I) and stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It is assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.286-286
• /
• 2000

We consider a negative unity feedback control system in which Che PIO, PI, PD or P controller and a transfer function having only poles are in cascade, We define the notion of the structural polynomial which means that there exists a subdomain of the coefficient space in which the polynomial is Hurwitz (left half plane stable) polynomial. We obtain the necessary and sufficient condition of the structure of the transfer function of which the characteristic polynomial is a structural polynomial, In addition, this paper present another necessary and sufficient condition for the existence of a constant gain controller with which the characteristic polynomial is structurally stable, For the structurally stabilizable P controller, it is allowed that the transfer function may not to all pole plants.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.99-114
• /
• 1996

The MLV liposomes have been developed in many drugs and cosmetics fields. The phospholipid base is made from ceramides, cholesterol, cholesteryl ester, lecithin, lanolin ester, and B-sitosterol, and surfactants are made by using (PEG)n-sitosterol(n=5) and K-cetyl phosphate. We made visicles stable by passing samples through Microfludizer and croated multilamellar vesicles to make MLV liposomes similar to the structure of men's skin. In order to make MLV liposomes, we created lipid membrane films which a mixure of phospholipid base and polyol group was reacted above Tc(95$^{\circ}C$) by gelation for 3 hours. As the optimum conditions of Microfluidizer, we figured out 700 bar for the passing pressure of samples, 4$0^{\circ}C$ for its temperature, and 3 times of frequency to pass through samples. Our MLV liposomes is stable on conditions of a low temperature(5$^{\circ}C$) and a high temperature(45$^{\circ}C$), which is not to be split in a large range. We produced our own moisturizing cream which has a good affinity to skin by means of this system.

• Journal of applied mathematics & informatics
• /
• v.23 no.1_2
• /
• pp.57-71
• /
• 2007

This paper considers how to detect structure change in persistence from I(1) to I(0) with innovations in the domain of attraction of a K-stable law. We derive the asymptotic distribution of test statistic and find that the asymptotic distribution of test statistics depends on the stable index K, which is often typically unknown and difficult to estimate. Therefore the subsampling method is proposed to detect changes without estimating K. We establish the asymptotic validity of this method and assess its performance in finite samples by means of simulation study.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.600-605
• /
• 2003

Battery of rolling stock is a very important device as power supply at starting and emergency control. This paper analyzes the quality of Ni-Cd battery by means of performance test. Ni-Cd battery have suitable and stable properties. That is very stable to discharge on low temperature state and very easy to manage and repair. This paper confirm the performance and property of Ni-Cd battery on low temperature environment by the performance test and estimate the life-cycle of Ni-Cd battery on board at rolling-stock by the life-test and the using-test.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.104-107
• /
• 2000

High quality BSCCO thin films have been fabricated by means of an ion beam sputtering at various substrate temperatures, T$\_$sub/, and ozone gas pressures, PO$_3$. The correlation diagrams of the BSCCO Phases appeared against T$\_$sub/ and PO$_3$ are established in the 2212 and 2223 compositional films. In spite of 2212 compositional sputtering, Bi2201 and Bi2223 phases as well as Bi2212 one come out as stable phases depending on T$\_$sub/ and PO$_3$. From these results, the thermodynamic evaluations of ΔH and ΔS which are related with Gibbs' free energy change for single Bi2212 or Bi2223 phase are performed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.83-90
• /
• 2004

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature and low temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room temperature and low temperature at $25^{\circ}C$, $-30^{\circ}C$, $-50^{\circ}C$, $-70^{\circ}C$,$-100^{\circ}C$, and $-150^{\circ}C$, in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range ΔKth in the early stage of fatigue crack growth (Region I)was increased but stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to decrease temperature. It is assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerably higher than that of room temperature in the early stage and stable of fatigue crack growth region.