• Ocean and Polar Research
• /
• 제37권4호
• /
• pp.327-332
• /
• 2015

Isotopic compositions of ice and meltwater play a very crucial role in paleoclimate studies based on ice cores and water resources research conducted in alpine hydrogeology. Better understanding of variations in the stable isotopic compositions of water is required since changes from ice to liquid water are gaining more attention due to recent climate change. In this work, a melting experiment was designed and conducted to investigate how the isotopic compositions of ice vary with time by heat sources, such as solar radiation. We conducted the melting experiment for 22 hours. The discharge rate rose to a maximum value after 258 minutes and gradually declined because we fixed the heat source. The isotopic compositions of meltwater increased linearly or to a second degree polynomial. The linear relationship between oxygen and hydrogen has a slope of 6.8, which is less than that of the Global Meteoric Water Line (8) and higher than a theoretical value (6.3). The deuterium excess decreased when ${\delta}D$ or ${\delta}^{18}O$ increases or vise versa since the slope of the relationship for ice-liquid exchange is less than 8. These findings and the apparatus of the melting experiments will make a helpful contribution to the studies of stable isotopes and the melting process in temperate and polar regions.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.100-111
• /
• 2003

극소형 피코위성 HAUSAT-1(Hankuk Aviation University SATellite-1)의 궤도는 고도 650km~800km, 경사각 65도 또는 98도에서 비행할 예정이다. 저궤도에서 운용되기 때문에 외란으로 작용하는 요소 중 지구중력과 지구 자기장에 의한 영향이 크다. HAUSAT-1은 자세제어를 하기 위해서 자기 토커를 사용하며, 부가적으로 탑재체인 태양전지셀 전개 매커니즘을 중력구배 붐으로 사용한다. 위성의 자세 안정화 성능을 판단하기 위해서 MATLAB을 이용해서 시뮬레이션 하였고, 시뮬레이션은 8차 자기장 모델, 비선형 외란 방정식, 그리고 비선형 위성 자세방정식을 사용해서 수행되었다. 시뮬레이션을 통해서 HAUSAT-1의 중력구배붐 전개 전과 후 그리고 외란에 의한 자세 변화를 확인하고 결과를 비교했다. 자기 토커를 이용한 효율적인 HAUSAT-1의 자세제어 시스템 개발을 위한 자세 안정화 방법에 대해서도 분석하였다.

• 한국항해항만학회지
• /
• 제41권5호
• /
• pp.269-276
• /
• 2017

"Tracking" here refers to the estimation of a moving object with some degree of accuracy where at least one measurement is given. The measurement, which is the sensor-obtained output, contains systemic errors and errors that are due to the surrounding environment. Tracking filters play the key role of the target-state estimation after the updating of the tracking system; therefore, the type of filter that is used for the conduction of the estimations is crucial in the determining of the reliability of the updated value, and this is especially true since the performances of different filters vary when they are subjected to different environmental and initial conditions. The purpose of this paper is the conduction of a comparison between the performances of the ${\alpha}-{\beta}-{\gamma}$ filter and the Kalman filter regarding an ARPA-system tracking module that is used on board high-dynamic warships. The comparison is based on the capability of each filter to reduce noise and maintain a stable response. The residual error is computed from the difference between the true and predicted positions and the true and estimated positions for the given sample. The results indicate that the tracking accuracy of the Kalman filter is higher compared with that of the optimal ${\alpha}-{\beta}-{\gamma}$ filter; however, the response of the optimal ${\alpha}-{\beta}-{\gamma}$ filter is more stable.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.261-268
• /
• 2020

Objective: This study was conducted to provide basic data on physical function improvement activities of elderly care facilities by identifying the degree of physical improvement activities of elderly caregivers. Design: Descriptive correlational study. Methods: The instrument of this study consisted of 12 questions on the general characteristics of the subject. For the assessment of improvement in physical function activities, the measuring tool used for the elderly consisted of a total of 20 questions. For data analysis, Pearson's correlation coefficient & Spearman's rho and multiple regression were used. Results: The higher the age of the subjects, the lower their educational background (r=-0.273, p<0.05), and the higher the probability of having a religion (r=-0.258, p<0.05), the more stable the employment type (r=-0.333, p<0.05). The higher the level of education, the higher the monthly income (r=0.187, p<0.01), and the shorter the career (r=-0.204, p<0.05). The more stable employment, the more unstable duty (r=-0.245, p<0.05), and the more unstable work, the higher the monthly income (r=-0.206, p<0.05) and the longer the career, the higher the monthly income (r=0.247, p<0.05). The more stable the employment, the more activities to improve physical function were found (r=0.341, p<0.05), and the more unstable the duty, the more activities to improve physical function were found (r=0.321, p<0.05), and the higher monthly income, the less physical function improvement activities (r=-0.196, p<0.05). Conclusions: It is necessary to provide regular services by a dedicated physical therapist for physical function improvement activities in order to improve the quality of life of the elderly in the future.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.106-106
• /
• 2015

The information of flow regimes continues to be norm in water resource and watershed management, in that stream flow regime is a crucial factor influencing water quality, geomorphology, and the community structure of stream biota. The objectives of this study were to estimate Korean stream flows from landscape variables, classify stream flow gages using hydraulic characteristics, and then apply these methods to ungaged biological monitoring sites for effective ecological assessment. Here I used a linear modeling approach (MLR, PCA, and PCR) to describe and predict seasonal flow statistics from landscape variables. MLR models were successfully built for a range of exceedance discharges and time frames (annual, January, May, July, and October), and these models explained a high degree of the observed variation with r squares ranging from 0.555 (Q95 in January) to 0.899 (Q05 in July). In validation testing, predicted and observed exceedance discharges were all significantly correlated (p<0.01) and for most models no significant difference was found between predicted and observed values (Paired samples T-test; p>0.05). I classified Korean stream flow regimes with respect to hydraulic and hydrologic regime into four categories: flashier and higher-powered (F-HP), flashier and lower-powered (F-LP), more stable and higher-powered (S-HP), and more stable and lower-powered (S-LP). These four categories of Korean streams were related to with the characteristics of environmental variables, such as catchment size, site slope, stream order, and land use patterns. I then applied the models at 684 ungaged biological sampling sites used in the National Aquatic Ecological Monitoring Program in order to classify them with respect to basic hydrologic characteristics and similarity to the government's array of hydrologic gauging stations. Flashier-lower powered sites appeared to be relatively over-represented and more stable-higher powered sites under-represented in the bioassessment data sets.

• 한국안광학회지
• /
• 제17권2호
• /
• pp.143-151
• /
• 2012

목적: 각막형상이나 각막난시도, 피팅상태가 구면 RGP 렌즈를 피팅함에 있어서 각막 중앙안정위치(stable centration)에 어떠한 영향을 미치는지를 밝히고자 하였다. 방법: 각막난시가 0.00~2.75 D인 원형 각막 29안 및 대칭나비형 각막 45안을 대상으로 RGP 렌즈를 양호한 피팅상태, 스팁한 피팅상태, 플랫한 피팅상태로 착용시키고 각막에서의 렌즈 위치를 촬영하여 분석하였다. 결과: 구면 RGP 렌즈의 수직방향 렌즈 안정 위치는 모든 경우에 아래 쪽으로 중심이탈되었으며 중심이탈 정도는 일관성이 없었다. 수평방향의 렌즈 안정위치는 렌즈의 베이스커브가 커짐에 따라 귀 쪽으로 렌즈 중심이 이탈되는 정도가 통계적으로 유의하게 커졌으며 각막형상과 난시도, 피팅상태에 따라 렌즈 중심의 이탈 정도에 차이가 있었다. 동일한 난시도를 가진 원형 각막은 대칭나비형 각막에 비해 렌즈 중심이 귀쪽방향으로의 이탈 정도가 더 컸다. 결론: 구면 RGP 렌즈의 피팅상태, 난시도 및 각막형상에 따라 중심안정위치가 달라지며 이를 고려하면 RGP 렌즈 처방 시 성공률을 높일 수 있을 것으로 보인다.

• 환경생물
• /
• 제25권1호
• /
• pp.56-65
• /
• 2007

본 연구는 우이도 해안사구식생의 군락구분과 분포, 그리고 생육지 환경의 생태적 특성을 밝힘으로써 해안 사구식생의 관리, 보존 및 복원에 활용될 수 있는 기초자료를 제공하는데 그 목적이 있다. 조사는 Braun-Blanquet(1964)의 식물사회학적 방법에 의하여 실시하였다. 우이도의 사구식생은 순비기나무군락, 왕잔디군락, 보리사초군락, 갯쇠보리군락, 띠군락, 좀보리사초군락, 갯메꽃군락, 모래지치군락, 그리고 배후식생으로 상록침엽수림인 곰솔군락의 총 9개 군락으로 구분되었다. 사구식생을 구성하고 있는 식물들 중에서 갯메꽃(77%), 순비기나무(74%), 보리사초(66%), 왕잔디(50%), 띠(47%) 등의 상재도가 높게 나타났으며, 이 중 갯메꽃은 가장 높은 상재도에도 불구하고 각 군락내 절대기여도는 낮은 상태를 보였다. 사구식물의 분포와 생육 특성에서는 순비기나무, 보리사초, 왕잔디 등이 불안정사구에서 안정사구지가지 폭넓게 분포한데 반하여 갯쇠보리와 띠는 주로 안정사구지에서 군락을 형성하였다. 특히 보리사초는 모래의 퇴적이 계속되는 불안정사구지에서 우점 분포하였으며, 좀보리사초와 모래지치는 담수주변부에서 국지적으로 분포하였다.

• 한국방재학회 논문집
• /
• 제8권6호
• /
• pp.21-30
• /
• 2008

이 연구에서는 현수교 PWS 및 CFRC 행어로프의 바람에 의한 내풍안정성 평가을 위한 풍동실험을 수행하였다. 풍동실험결과, PE관으로 피복된 PWS 케이블은 단일 케이블에서 와류진동이 발생하고 복수 케이블에서는 중심간격이 $3\sim6D$일때 웨이크갤로핑이 발생하였다. 진동이 발생하지 않는 복수 케이블에서도 풍향각이 달라지면 웨이크갤로핑이나 웨이크플러터가 발생함을 알 수 있었다. CFRC 케이블은 케이블 중심간격 및 풍향각에 관계없이 PWS 케이블에 비해 안정된 내풍성능을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2119-2123
• /
• 2007

This study deals with performance characteristics of heat pipe combined with a solid-liquid phase change material(PCM). The outer diameter of the heat pipe was 9.5 mm and the total length was 600 mm, where the evaporator, the adiabatic section and the condenser lengths were equally 200 mm. A paraffin wax having a melting point of 58.5$^{\circ}C$ was used as PCM. The paraffin container was attached to the adiabatic section of the heat pipe. The paraffin container had outer diameter of 18 mm, wall thickness of 1.2 mm and the total length of 100 mm. The heat pipe was tested with tilt angle of horizontal degree and favorite angle 10 degree, with evaporator lower position to provide stable operation of the heat pipe. Input thermal load was varied from 40 W, with increment of 40 W, to above 100 W until the maximum temperature of the heat pipe wall reached 200$^{\circ}C$. Test results of the PCM heat pipe were presented in comparison with conventional heat pipe of the same basic dimensions. The performance was analyzed in terms of temperature distribution, thermal resistance and heat transport capability.

• 동력기계공학회지
• /
• 제16권3호
• /
• pp.51-56
• /
• 2012

The effect of deformation induced martensite transformation on the mechanical properties in austenitic stainless steel with high Mn was studied. ${\alpha}$'-martensite was formed by deformation in austenitic stainless steel with high Mn. Deformation induced ${\alpha}$'-martensite was formed with surface relief by cold rolling. With the increase of deformation degree, volume fraction of deformation induced martensite was increased rapidly in early stage of deformation and then, increased slowly. With the increase of deformation degree, hardness and tensile strength were rapidly increased with linear relations, while elongation was rapidly decreased and then slowly decreased. Hardness, tensile strengths and elongation were influenced strongly by deformation induced martensite.