• Journal of applied mathematics & informatics
• /
• 제30권3_4호
• /
• pp.499-510
• /
• 2012

Here we consider the inertial effect in a horizontal mushy layer during solidification of a binary alloy. Using perturbation technique, we obtain two systems, one of zero order and the other of first order. We consider a mushy layer with an impermeable mush-liquid interface and of constant permeability. The analysis reveals that the effect of inertial parameter is stabilizing in the sense that the critical Rayleigh number at the onset of motion increases by the inertial effect.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.29-33
• /
• 2013

The understanding of the strain dependence of critical current, $I_c$, in the reversible region is important for the evaluation of the performance of coated conductor (CC) tapes in practical applications. In this study, the stress/strain tolerance of $I_c$ in GdBCO CC tapes with stainless steel substrate stabilized by additional Cu and brass laminate was analyzed quantitatively through $I_c$-strain measurement at 77 K under self-field. The variation in irreversible strain limits of CC tapes by the addition of stabilizing layers was analyzed through the consideration of the pre-strain induced on the GdBCO coating film. The results were then compared with the ones previously reported for GdBCO CC tapes with Hastelloy substrate. As a result, GdBCO CC tapes with stainless steel substrate showed much higher strain tolerance of $I_c$ as compared with those adopting Hastelloy substrate.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권1호
• /
• pp.1-5
• /
• 2010

Silver stabilizing layer of coated conductor has been prepared by dip coating method using organic silver complexes containing 10 wt% silver as a starting material. Coated silver complex layer was dried in situ with hot air and converted to crystalline silver by post heat treatment in flowing oxygen atmosphere. A dense continuous silver layer with good surface coverage and proper thickness of 230 nm is obtained by multiple dip coatings and heat treatments. The film heat treated at $500^{\circ}C$ showed good mechanical adhesion and crystallographic property. The interface resistivity between superconducting YBCO layer and silver layer prepared by dip coating was measured as $0.67\;{\times}\;10^{-13}\;{\Omega}m^2$. Additional protecting copper layer with the thickness of $20\;{\mu}m$ was successfully deposited by electroplating. The critical current measured with the specimen prepared by dip coating and sputtering on same quality YBCO layer showed similar value of ~140 A and proved its ability to replace sputtering method for industrial production of coated conductor.

• 보존과학회지
• /
• 제32권2호
• /
• pp.155-165
• /
• 2016

수침고목재인 목재유물의 보존처리에 가장 많이 사용되는 PEG 함침 후 진공동결건조 방법의 단점인 표면 결함에 대한 안정화처리를 위해 HPC를 도포하였다. HPC의 효과를 확인하기 위해서 외관 및 실체현미경 관찰, 색차, 중량변화율, 치수변화율을 측정하고, 통계분석을 실시하였다. 목재시료의 표면에 HPC가 얇은 층을 형성하였고, 가도관의 관공과 균열의 틈 사이를 메우고 있었다. HPC 1,000,000을 처리한 시료의 부후되지 않은 표면에서 나타난 백화현상을 제외하고 다른 변화는 나타나지 않았다. 열화시킨 시료는 수분 흡착에 의한 색변화가 나타났다. 시료 표면의 얇은 HPC 층은 열화 후에도 유지되고 있었으며, 수분 흡착에 의한 중량변화와 치수변화는 HPC에 의해 억제되는 것으로 나타났다.

• 지질공학
• /
• 제16권2호
• /
• pp.189-199
• /
• 2006

본 논문은 도로공사시 발생된 붕괴사면을 대상으로 사면안정성을 검토하고, 불안정할 경우 합리적인 사면보강공법을 제안한 현장사례 연구이다. 사면조사결과 대상사면은 5개의 대규모 인장균열을 포함하고 있으며, 사면활동은 인장균열에서 시작하여 표토층과 풍화암층사이까지 발생된 것으로 판단된다. 사면안정해석은 건기시와 우기시에 대하여 각각 수행되었으며, 대상사면은 현재 불안정한 것으로 예측되었다. 사면보강공법은 사면의 파괴규모에 따라 선정하는 것이 바람직하다. 즉, 파괴규모에 따라 소규모파괴, 중규모파괴, 그리고 대규모파괴로 나누고 각각의 파괴규모에 따라 사면보강공법을 결정할 수 있다. 대상사면의 경우 대규모파괴에 해당하므로 사면보강공법은 안전율증가공으로 억지말뚝공을 채택하고, 안전을 유지공으로 식생공(Seed Spray) 및 지표수배제공을 채택할 수 있다. 억지말뚝으로 보강된 사면의 안정해석을 위하여 SLOPILE(Ver 3.0)프로그램을 적용하였다. 사면안정 해석결과 1열의 억지말뚝을 시공할 경우 안정한 것으로 나타났으며, 해석결과로부터 억지말뚝의 사면안정효과를 확인할 수 있다.

• 한국산업융합학회 논문집
• /
• 제1권1호
• /
• pp.51-58
• /
• 1998

This study was carried out to investigate the leaching characteristics by the landfill of solidified sludge. pH of leachate was 3.7 - 5.8 and 8.0 - 10.4 in each column using sand as a top-soil layer on filled municipal waste and solidified cake. $NH_3$-N in leachate was increasing in the each column using sand as a top-soil layer on filled dewatered sludge and solidified cake, but decreasing in the each column using sand and solidified cake by top-soil layer on filled municipal waste. Also the concentration of $NO_3$-N was on the way of stabilizing but was difficult to find any tendency until now. Zn and Mn in leachates were the highest in the column filled with the solidified sludge, Cr, Pb and Cd were low concentration at each column.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.512-519
• /
• 2001

Sink roll has been used in molten Zn-0.2%Al alloy bath of continuous galvanizing line in sinking and stabilizing process of the steel strip in molten metal bath. In this process, although the scraper scraps off the sink roll surface, the dross compounds is builded up on the sink roll surface and the life time of the sink roll is shorten by the dross compounds. The present study was investigated the application of the spray coating layer on sink roll body for improving durability In molten Zn-0.2%Al alloy. Through the durability tests in molten Zn-0.2%Al alloy with various ceramic and cermet coating layer, the optimum bond and top coating material was obtained. As the results, the system of STS430F base metal, WC-l7Co bond and $ZrO_2-SiO_2$ top coating was clarified to be the best quality of durability in molten Zn-0.2%Al alloy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.415-418
• /
• 2002

We have studied electro-optic properties and layer deformations in the smectic phases of 4-(6ethoxy-l-trifluoromethyl-hexyloxycarbonyl)-phenyl-4-Nonyloxybiphenyl-4-carboxylat ( TFMEOHPNBC ) having fluorine attached to one of its benzene rings by electro-optical and small angle x-ray scattering techniques. 3 and 5${\mu}m$ thick test cells were prepared using beryllium plates to minimize x-ray beam absorption. Layer structure and orientation was studied while changing the amplitude and frequency of the applied electric field as a function of cell temperature. We observed that the chevron layer tilt angle is reduced and layer spacing is increased as stabilizing in antiferroelectric phase. This result is extraordinary that there is dimerization in antiferroelectric phase. We also found that there is a threshold electric field that changes the chevron structure to bookshelf structure. This threshold electric field depends on the frequency and temperature as shown in Fig.1. We will discuss the dynamics of layer orientation as determined from the x-ray, electro-optic and dielectric spectroscopy.

• 대한조선학회논문집
• /
• 제52권2호
• /
• pp.135-142
• /
• 2015

The Anti-Rolling Tank(ART) has an advantage over the other roll stabilizing devices, when ship is staying and working at one site of sea. An important design point of ART is the tank tuning, that is, matching the tank natural period to the ship's roll natural period. Since the load condition and consequently the roll natural period of ship is to be changed widely, the natural period of ART also has to be changed widely. In case of the existing U-tube type ART with a single layer duct, the tank natural period can be changed in a relatively narrow range. This paper suggests a new U-tube type ART system using a double layer duct to enable wide change of ART natural period. Through the roll experiments performed in regular beam waves for a box-type model ship, it is shown that the double layer duct ART has about two times wider period range and a better reducing effect of roll magnitude than the single layer duct ART.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.191-193
• /
• 2006

YBCO wire has a metal substrate to improve the texture structure and highly conductive layers to increase the cryogenic stability. When AC current flows in the YBCO wire, magnetic field which is generated by the AC current magnetizes the metal substrate and induces the eddy current in the stabilizing layer. To examine the effect of the metal substrate and the conducting layer on the transport current loss of YBCO wire, this paper presents the transport current loss of YBCO wire which has metal substrate and conductive layer. YBCO wire with Ni-W substrate and copper layer were chosen as the model HTS wire for numerical calculation. Finite element method has been used to calculate the transport loss and the results of numerical calculation was compared with analytic calculation suggested by Norris.