• Journal of Korean Physical Therapy Science
• /
• v.19 no.2
• /
• pp.63-71
• /
• 2012

Purpose : This study aimed to acquire a basic knowledge about lumbar stability and inquire into exercise approach of pressure biofeedback unit for lumbar stability. Methods : This study was composed with reviewed theory of lumbar stability and several books and articles for exercise using pressure biofeedback unit. Results : The stability of lumbar should work symmetrical with passive, active, control subsystem in neutral zone, and local muscles should be using for stability. Especially, selective using of transverse abdominis work for lumbar stability importantly. The control of using pressure biofeedback unit may important not only examination but treatment. Conclusion : The stability of lumbar need co-contraction of specific local muscle and training for timing as well as using pressure biofeedback unit for accurate control may use for examination and therapedic approach.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.602-609
• /
• 2001

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zeroenergy mode of the element. The analysis includes an inflation analysis and a lateral analysis of an air spring for the deformed shape and the spring load with respect to the vertical and l ateral deflection. Numerical results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force with respect to the inflation pressure and the lateral deflection.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.350-353
• /
• 2001

Due to the widen demand of plastic part in automobiles, more accurate numerical simulation works are needed to find optimum molding process like filling fiber orientation pressure control. Therefore, C-mold software was applied for the simulation of injection molding process and cooling process in this research. The purpose of this study is developing a ball seat which made by injection process with PA66 resin and it is applied to the automobile suspension system. It must secure low friction, wear resistance and dimensional accuracy. Specially this study aims to get the quality stabilization of injection molded bass-seat parts.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.715-721
• /
• 1997

W/O/W multiple emulsions were prepared comprising $MgSO_4$ in the inner aqueous phase as a model drug. The stability and drug release behavior of the multiple emulsions were studied using optical microscopy, viscometry and conductometry. Glucose was introduced in the outer aqueous phase to reduce the osmotic pressure gradient across the oil layer arising from the localization of drug molecules in the inner water phase. It was found that the presence of glucose was effective in stabilization of the multiple emulsions and in control of the release rate of drug more evidently when oil phase was partially hydrophilized with cetostearyl alcohol. This may be attributed to the fact that the migration of water accompanying the hydrophilic surfactant to the inner water phase was limited under a reduced osmotic pressure gradient and thereby slow down the destabilization of the oil/inner water interface.

• Advances in nano research
• /
• v.17 no.2
• /
• pp.125-136
• /
• 2024

In the present research the durability and geotechnical properties of an expensive clayey soil stabilized by two different compositions of additives were investigated and compared. The first composition consisted of environmentally and ecofriendly materials: BOF steel slag ranging from 0-20% as well as rice husk ash (RHA) ranged 0-16%wt of dry soil. The other composition consisted of relatively new generation of materials including nanomaterials: nano-CaCO3 as well as nano-SiO2. Atterberg limits test, free swell percent test, swelling pressure test and unconfined compressive test were used to assess the stabilizers influences upon expansive soil geotechnical characteristics. Also, the recurrent wet-dry cycles test was exerted on experimental and non-experimental samples for estimating stabilizers effects on durability. According to the results, each of the BOF slag and RHA enhances the expansive soil properties individually, while combination of slag-RHA led to better improvement of the soil properties. Also, the composition of nano-CaCO3 and SiO2 dramatically improved the clay soil operation. The optimum values of slag+RHA were suggested as 20% slag+12% RHA to enhance percent of swelling, pressure of swelling in addition to UCS as much as 95%, 96%, and 370%, respectively. The optimum value for the second stabilizer in this study was found to be 2%nano-SiO2+2% nano-CaCO3 which led to 318% increase in UCS and 86% decrease in swelling pressure.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.533-544
• /
• 2006

The amplitude and phase lag of surface deformation were determined for a compliant coating under the action of turbulent pressure fluctuations. For this purpose, pressure fluctuations were measured experimentally. The amplitude and duration of coherent wave train of pressure fluctuations were investigated using digital filtration. The transient response was calculated for stabilization of forced oscillations of the coating in approximation of local deformation. The response of coating was analyzed with considerations of its inertial properties and limited duration of coherent harmonics action of pressure fluctuations. It is shown that a compliant coating interacts not with the whole spectrum of pressure fluctuations, but only with a frequency range near the first resonance. According to the analysis, with increasing elasticity modulus of the coating material E, deformation amplitude decreases as 1/E, and dimensionless velocity of the coating surface decreases as $1/\sqrt{E}$. For sufficiently hard coatings, deformation amplitude becomes smaller than the thickness of viscous sublayer, while surface velocity remains comparable to vertical velocity fluctuations of the flow.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.4
• /
• pp.247-251
• /
• 2017

Titanium alloy has been widely used in the aerospace industry because of its high strength and good corrosion resistance. During cutting, the low thermal conductivity and high chemical reactivity of titanium generate a high cutting temperature and accelerates tool wear. To improve cutting tool life, cryogenic machining by using a liquid nitrogen (LN2) jet is suggested. In cryogenic jet cooling, evaporation of LN2 in the tank and transfer tube could cause pressure fluctuation and change the cooling rate. In this work, cooling uniformity is investigated in terms of liquid nitrogen jet pressure in cryogenic jet cooling during titanium alloy turning. Fluctuation of jet spraying pressure causes tool temperature to fluctuate. It is possible to suppress the fluctuation of the jet pressure and improve cooling by using a phase separator. Measuring tool temperature shows that consistent LN2 jet pressure improves cryogenic cooling uniformity.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.21 no.2
• /
• pp.7-14
• /
• 2015

Purpose: The purpose of this study was to investigate the effects of falls prevention exercise program to balance, falls efficacy, blood pressure and blood lipids in the elderly females. Methods: A total of twenty-six elderly women participated in this study. All subjects participated in exercise program based on pelvic stabilization and balance training on two times a week for twelve weeks. They were measured about Berg balance scale (BBS), Time up and go (TUG), Functional reach test (FRT), Sit to stand (STS) for balance, falls efficacy scale-international (FES-I) for falls efficacy, systolic blood pressure (SBp), diastolic pressure (DSp) for blood pressure, and total cholesterol (TC), triglyseride (TG), high density lipoprotein cholesterol (HDL-C), low density lipoprotein cholesterol (LDL-C) for blood lipids. Results: There were significant improvements of BBS (p<.05), TUG (p<.001) FRT (p<.01), and STS (p<.001) in the balance after exercise program. There was significant improvements in FES-I (p<.001) in the falls efficacy, There were no statistical differences of SBp and DSp in the blood pressure. There were no statistical differences of TC, TG, HDL-C, and LDL-C in the blood lipids. Conclusions: Falls prevention exercise program was meaningful increasing balance ability and falls efficacy.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.11-17
• /
• 2012

In this study, an experiment with large-scale model was performed according to raising embankment in order to investigate the cause of collapse by a change in water level of reservoir. Also, the settlement and pore water pressure by high water level and a rapid drawdown were compared and analyzed. After raising embankment for inclined core, there was no infiltration by leakage. For the vertical core, the pore water pressure showed a largely change by faster infiltration of pore water than in the inclined core. In a rapid drawdown, inclined core was remained stable but vertical core showed a largely change in pore water pressure. A settlement after a raising embankment showed a larger measure of settlement than before the raising embankment. The leakage quantity before a raising embankment and an inclined extension showed no leakage. Leakage in vertical extension was measured 160 $l$. From the result, a instrument system that can accurately estimate a change of pore water pressure shall be established for a rational maintenance and stabilization of raising embankment for agricultural reservoir.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.121-128
• /
• 2000

Landfill and lysimeter experiments were conducted to estimate the optimum air injection method for the degradation of waste in landfill and the pre-stabilization. Continuous injection with low pressure and quantity can be effective for pre-stabilization of old landfill due to the lower contents of volatile solids in landfill. Air injection and landfill gas (LFG)extraction showed that the SVE (Soil Vapor Extraction) effect by air ventilation was more significant than the biodegradation of organics. Theses results suggested that they could accelerate the biological stabilization of organic waste in landfills. It is also expected that they would reduce the problems including gas emission during the landfill mining, separation and/or transportation to such levels that might be discharged directly to the atmosphere or with minimal treatment, if required.