• Title/Summary/Keyword: stabilization of pressure

Search Result 243, Processing Time 0.025 seconds

A Study on the Flame Structure and Stabilization in a Divergent Flow (확대관 흐름에 있어서 화염의 안정성 및 구조에 관한 연구)

  • 최병륜;이중성
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.18 no.2
    • /
    • pp.512-518
    • /
    • 1994
  • An experimental study is made on turbulent diffusion flames stabilized by a circular cylinder in a divergence flow. In this paper, stabilization characteristics and flame structure are examined by varying the divergence angle of duct and position of a circular cylinder. The fuel used is a commercial grade gaseous propane injected by two slit of rod. It is found that the positive pressure gradient greatly influences the eddy structure behind the rod. and that two different kinds of combustion patterns exist at the blowoff limit depending on the divergent angle of duct. They are distinguished by their wake structures: one associated with Karman vortex shedding, the other without it. Also, the blowoff velocity in the former is found to be higher than in the later.

Effects of EMS Compression Belts with Different Muscular Patterns on Lumbar Stabilization (근육모양의 패턴을 달리한 EMS 복압벨트가 요추 안정화에 미치는 영향에 관한 연구)

  • Kim, Dae-Yeon;Park, Jin-hee;Kim, Joo-Yong
    • Science of Emotion and Sensibility
    • /
    • v.24 no.2
    • /
    • pp.81-92
    • /
    • 2021
  • In this study, we investigated the effects of five EMS lumbar back pressure belts produced on an anatomical basis on lumbar spine stabilization. Five core muscles were selected, including the urinal, vertebral column, endotracheal, external abdominal, and large back muscles, and patterns were designed using a conductive fabric considering the appropriate muscle shape and pain-causing points. We experimented with four motions to examine the effects of different EMS abdominal compression belts on lumbar spine stabilization. Five healthy men in their 20s were selected. The selection conditions include no back pain history for the past three months, no restricted movements through pre-inspection, and the muscular strength of the body should belong to the normal grade. Using SLR, the sequence of experimental actions was chosen from the following but not limited to left-hand, body-hand, and back-line forces. Resting between movements lasted for 2 min, and the experiments were conducted after wearing the EMS abdominal pressure belt. Electrical stimulation was applied for 10 min to increase blood flow and muscle activation. The statistics of the experimental results were analyzed for specific differences by conducting the Wilcoxon and Friedman tests with nonparametric tests. The ranking results of each pattern were successfully assessed in the order of 5, 4, 3, 1, 2 for the five patterns, and we could identify slightly more significant results for experimental behavior associated with each muscle movement. Patterns produced based on anatomy showed differentiated effects when electric stimulation was applied to each muscle in different shapes, which could improve the stabilization of the lumbar spine in everyday life or training to the public. Based on these results, subsequent research would focus on developing smart healthcare clothing that is practical in daily life by employing different anatomical mechanisms, depending on the back pain, to utilize trunk-type tights.

Effects of respiratory reeducation exercise using a pressure biofeedback unit on the quality of life of persons with stroke

  • Kim, Hyun Seung
    • Physical Therapy Rehabilitation Science
    • /
    • v.9 no.4
    • /
    • pp.238-243
    • /
    • 2020
  • Objective: The purpose of this study was to confirm the validity of a respiratory retraining exercise using pressure biofeedback units among individuals with stroke as an effective intervention for improving quality of life. Design: Randomized controlled trial. Methods: Thirty patients with stroke were recruited as subjects. Among them, 15 patients were randomly assigned to an experimental group performing lumbar stabilization exercise and respiratory retraining exercise, and the other 15 patients were randomly assigned to a control group conducting only lumbar stabilization exercises. Exercises were conducted 3 times a week for 6 weeks, and quality of life was evaluated in the pre-test, 3 weeks and 6 weeks periods. The respiratory retraining exercises were performed using a pressure biofeedback unit and the degree of the quality of life was measured using the Stroke- Specific Quality of Life. For data analysis on the study results, a two-way repeated ANOVA was used in order to observe for changes in the measured variables according to time for both groups. If there was a reciprocal action between the groups and the time in the effect test within the entities, a one-way repeated ANOVA was implemented and was statistically processed. Results: There was a significant difference in the main effect test between the 2 populations depending on the duration of the experiment (6 weeks) (p<0.05). Conclusions: The above results showed that respiratory retraining exercises may provide positive effects in the treatment of stroke as the quality of life showed significant differences according to the duration of treatment.

Development of Brace-type Wearable Robot for Lumbar Stabilization (요부 안정화를 위한 복대형 입는 로봇 개발)

  • Joowan Kim;Jaehoon Sim;Keewon Kim;Sungun Chung;Jaeheung Park
    • The Journal of Korea Robotics Society
    • /
    • v.18 no.2
    • /
    • pp.189-196
    • /
    • 2023
  • An abdominal brace is a recommended treatment for patients with lumbar spinal disorders. However, due to the nature of the static brace, it uniformly compresses the lumbar region, which can weaken the lumbar muscles or create a psychological dependence that worsens the condition of the spine when worn for an extended period of time. Due to these issues, doctors limit the wearing time when prescribing it to patients. In this paper, we propose a device that can dynamically provide abdominal pressure and support according to the lumbar motion. The proposed device is a wearable robot in the form of a brace, with actuators and a driving unit mounted on the brace. To enhance wearability and reduce the weight of the device, worm gears actuator and a multi-pulley mechanism were adopted. Based on the spinal motion of the wearer measured by the Inertia measurement unit sensors, the drives wire by driving pulley, which provide tension to the multi-pulley mechanism on both sides, dynamically tightening or loosening the device. Finally, the device can dynamically provide abdominal pressure and support. We describe the hardware and system configuration of the device and demonstrate its potential through basic control experiments.

Finite element analysis of stabilization splint pressure distribution in a patient with disc displacement without reduction: A preliminary study

  • Acing Habibie Mude;Muhammad Ikbal;Mukhsan Putra Hatta;Irfan Sugianto;Edy Machmud;Fadhlil Ulum A Rahman;Imran Irsal;Eka Fibrianti;Muthia Mutmainnah Bachtiar;Thalib Rifky Samdany Abdullah Syeban Attamimi
    • Imaging Science in Dentistry
    • /
    • v.54 no.3
    • /
    • pp.251-256
    • /
    • 2024
  • Purpose: This study was performed to investigate the pattern of condylar pressure distribution in the discs of a patient diagnosed with disc displacement without reduction. Materials and Methods: This research consisted of a pre- and post-test observational clinical study. A patient diagnosed with disc displacement without reduction underwent treatment with an occlusal splint for 3 months. Finite element analysis employed a 3-dimensional model constructed from magnetic resonance images of the patient, taken both before the application of the splint and 3 months after its use. Results: The post-test model demonstrated a decrease in condylar pressure on the disc, with measurements dropping to 72 MPa from the pre-test level of 143 MPa. In the pre-test, the pressure distribution pattern was concentrated on the lateral posterior border, whereas in the post-test, it shifted toward the intermediate zone of the disc. Conclusion: Utilization of a stabilization splint for 3 months resulted in decreased pressure and a marked change in the pressure distribution pattern on the temporomandibular disc.

Effects of Lumbar Stabilization on Abdominal Muscles Activity During Double Straight Leg Lowering

  • Ha, Sung-Min;Lee, Won-Hwee;Oh, Jae-Seop;Weon, Jong-Hyuck;Cynn, Heon-Seock;Kwon, Oh-Yun
    • Physical Therapy Korea
    • /
    • v.14 no.4
    • /
    • pp.14-20
    • /
    • 2007
  • To improve abdominal muscles strengthening, double straight leg lowering (DSLL) has been widely used in physical therapy, fitness program, and athletic program. The purpose of this study was to investigate the effects of the lumbar stabilization maneuver with a pressure biofeedback unit on the muscle activity of rectus abdominis (RA), external oblique (EO), and internal oblique (IO) during DSLL. Fourteen healthy young men were recruited from university population. The electromyography (EMG) activity was recorded from the RA, EO, and IO of both sides. The normalized EMG activity was compared using a paired t-test. The study showed that EMG activity in the RA, EO, and IO was significantly higher during DSLL with lumbar stabilization (DSLL-LS) compared to performed DSLL (p<.05). These results suggest that DSLL-LS is recommended as an effective method for strengthening exercise for the abdominal muscles.

  • PDF

Stability Rating of Liquid Propellant Rocket Engine (액체 로켓엔진의 연소 안정성 평가)

  • 손채훈;김영목
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2003.10a
    • /
    • pp.73-77
    • /
    • 2003
  • Stability rating of KSR-III rocket engine is conducted based on stability rating tests in the course of development of KSR-III rocket engine. Rocket engine is approved to have combustion stabilization ability when it can suppress the external perturbation or pressure oscillation with finite amplitude and recover the original stable combustion. Rocket engine in flight nay be perturbed with unexpectedly large amplitude and thus a designer should not only assure combustion stabilization ability of the engine but also quantify the stabilization capacity. For this, several quantitative parameters and their evaluation are introduced. To verify dynamic stability of KSR-III rocket engine, five stability rating tests have been conducted. Based on these test results, such parameters are quantified and thereby, the stabilization capacity of KSR-III rocket engine is evaluated.

  • PDF

The Effect of Abdominal Drawing-in Maneuver Aapplied to Sitting Position in Healthy Adult on Grip Power (정상 성인에서 앉은 자세에 적용한 복부 드로우인 기법이 파악력에 미치는 영향)

  • Kim, Chang-Sook
    • Journal of Korea Entertainment Industry Association
    • /
    • v.14 no.3
    • /
    • pp.475-482
    • /
    • 2020
  • The abdominal drawing-in maneuver(ADIM), which is performed to strengthen the stabilization muscles of the lumbar, is an exercise method that selectively contracts the TrA and IO by increasing intra-abdominal pressure. In order to check the effect of ADIM in sitting position, which is the most frequently used posture in everyday life, on how to grip power, ADIM was conducted in a sitting position for 30 healthy adults, and then the state was not performed. In each, the grip power was measured to determine how ADIM performed in the sitting position had an effect on grip power and which muscles had the most influence. The muscles mobilized for the electromyography(EMG) measurement were RA, EO, IO/TrA, and ES, which were the most activation lumbar stabilization muscles when ADIM was applied. As a result of the study, the activity on muscles of the lumbar stabilization was significantly increased and the grip power of the muscles was significantly increased than the ADIM in the sitting position. By comparing the measured difference value of each muscle, it was found that any muscle had a greater effect on grip power, but no muscle showed a significant correlation. It is thought that the increase of intra-abdominal pressure did not affect the grip power of a specific muscle. Therefore, if ADIM is performed in a sitting position that is frequently used in everyday life through this study, it will be more effective in increasing the grip power and lumbar stabilization.

Enhancing the oxidative stabilization of isotropic pitch precursors prepared through the co-carbonization of ethylene bottom oil and polyvinyl chloride

  • Liu, Jinchang;Shimanoe, Hiroki;Nakabayashi, Koji;Miyawaki, Jin;Choi, Jong-Eun;Jeon, Young-Pyo;Yoon, Seong-Ho
    • Journal of Industrial and Engineering Chemistry
    • /
    • v.67
    • /
    • pp.358-364
    • /
    • 2018
  • An isotropic pitch precursor for fabricating carbon fibres was prepared by co-carbonization of ethylene bottom oil(EBO) and polyvinyl chloride (PVC). Various pre-treatments of EBO and PVC, and a high heating rate of $3^{\circ}C/min$ with no holding time, were evaluated for their effects on the oxidative stabilization process and the mechanical stability of the resulting fibres. Our stabilization process enhanced the volatilization, oxidative reaction and decomposition properties of the precursor pitch, while the addition of PVC both decreased the onset time and accelerated the oxidative reaction. Aliphatic carbon groups played a critical role in stabilization. Microstructural characterization indicated that these were first oxidised to carbon-oxygen single bonds and then converted to carbon-oxygen double bonds. Due to the higher heating rate and lack of a holding step during processing,the resulting thermoplastic fibers did not completely convert to thermoset materials, allowing partially melted, adjacent fibres to fuse. Fiber surfaces were smooth and homogeneous. Of the various methods evaluated herein, carbon fibers derived from pressure-treated EBO and PVC exhibited the highest tensile strength. This work shows that enhancing the naphthenic component of a pitch precursor through the co-carbonization of pre-treated EBO with PVC improves the oxidative properties of the resulting carbon fibers.

Relationship Between Enhancement of Electrostriction and Decrease of Activation Energy in Porcine Pancreatic Lipase Catalysis

  • PARK HYUN;LEE KI-SEOG;PARK SEON-MI;LEE KWANG-WON;KIM AUGUSTINE YONGHWI;CHI YOUNG-MIN
    • Journal of Microbiology and Biotechnology
    • /
    • v.15 no.3
    • /
    • pp.587-594
    • /
    • 2005
  • The contribution of electrostriction of water molecules to the stabilization of the negatively charged tetrahedral transition state of a lipase-catalyzed reaction was examined by means of kinetic studies involving high-pressure and solvent dielectric constant. A good correlation was observed between the increased catalytic efficiency of lipase and the decreased solvent dielectric constant. When the dielectric constant of solvents was lowered by 5.00 units, the losses of activation energy and free energy of activation were 7.92 kJ/mol and 11.24 kJ/mol, respectively. The activation volume for $k_{cat}$ decreased significantly as the dielectric constant of solvent decreased, indicating that the degree of electrostriction of water molecules around the charged tetrahedral transition state has been enhanced. These observations demonstrate that the increase in the catalytic efficiency of the lipase reaction with decreasing dielectric constant resulted from the stabilization of electrostatic energy for the formation of an oxyanion hole, and that this stabilization was caused by the increase of electrostricted water around the charged tetrahedral transition state. Therefore, we conclude that the control of solvent dielectric constant can stabilize the tetrahedral transition state, thus lowering the activation energy.