• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.645-647
• /
• 1993

Surface breakdown characteristics are investigated under metallic-particle contaminated conditions in $SF_6$ gas. The main results show that a rib increases breakdown voltage by a corona stabilization effect and the elongation of discharge path. The breakdown voltage at higher pressures than 4 atm may be estimated on the basis of mean breakdown field strength($E_{BD}$) and discharge length(L) which depend on gas pressure and surface shape.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.114-117
• /
• 2007

In IRR(Integral Rocket-Ramjet), the booster is integrated into the ramjet combustor. Such combustors do not contain combustor liners or flame holders within the combustor due to the limited volume and flame stabilization depends on the recirculation zones formed by the sudden expansion region between the inlet duct and the combustor. A numerical study was conducted on the effect of flame holder which could be added to the inlet duct of IRR. Two different types of flame holder installations, flame holder without sudden expansion region and flame holder with small sudden expansion region, were compared and showed different flame shapes and pressure rise in the combustor.

• East Asian Economic Review
• /
• v.22 no.4
• /
• pp.531-555
• /
• 2018

This article aims to review the monetary policy rule under inflation targeting framework focusing on Mongolia. The empirical analysis estimates the policy reaction function to see if the inflation targeting has been linked with a monetary policy rule emphasizing on inflation stabilization since its adoption in 2007. The study contributes to the literature by examining the linkage between Mongolian monetary policy rule and inflation targeting directly and thoroughly for the first time and also by taking into account a recent progress in the inflation targeting framework toward forward-looking mode. The main findings were: the Mongolian current monetary policy rule under inflation targeting is characterized as inflation-responsive rule with forward-looking manner (one quarter ahead); the inflation responsiveness is, however, weak enough to be pro-cyclical to inflation pressure; and the rule is also responsive to exchange rate due to the "fear of floating", which weakens the policy reaction to inflation and output gap.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.3
• /
• pp.11-17
• /
• 2018

PURPOSE: The purpose of this study was to identify the effect of abdominal stabilization exercise with Stabilizer and Gymball. METHODS: The participants were divided randomly into 2 groups each of 20 participants in the gymball exercise group and 20 participants in the exercise group. The changes of respiratory muscle activity between the two groups were measured three times a week for 4 weeks. The activity of rectus abdominis and internal oblique was measured using surface EMG to measure respiratory muscle activity. The training was repeated five sets, and one set was repeated 6 times with one 10 second exercise and 5 second rest. RESULTS: The results of the study showed that there was a significant difference in the amount of respiratory accessory muscle activation, inspiratory pressure, respiratory minute volume at the experimental group with stabilizer and control group with gymball exercise. Between-group difference was statistically significant only for rectus abdominis muscle activation. CONCLUSION: Both the stabilizer and the gymball exercises were effective in improving the respiratory rate but there was no difference between the two groups. Also, when comparing activity of muscle in both group, both groups were effective in improving and more effective than improvement of muscular activity of stabilizer in muscle of stabilizer.

• Physical Therapy Korea
• /
• v.23 no.2
• /
• pp.67-74
• /
• 2016

Background: Lumbar stabilization (LS) improve the thickness of the quadratus lumborum (QL) muscle and muscle activity of the gluteus medius (GM) muscle during hip abduction in a side-lying position in patients with low back pain (LBP). Objects: The purpose of this study was to assess the effects of LS on muscle thickness of QL and muscle activity of GM during hip abduction in side-lying in patients with LBP. Methods: The study included 32 patients with LBP, who were randomly divided into the control group and experimental group, each with 16 patients. All subjects performed $35^{\circ}$ preferred hip abduction (control group) and $35^{\circ}$ hip abduction with LS (experimental group) during side-lying. An ultrasonography and a surface electromyography were used to measure the thickness of the QL muscle, and the muscle activities of the GM muscle respectively. Independent t-test was used to compare the muscle thickness of the QL and the muscle activity of the GM muscle, respectively. Results: Anterio-posterior diameter in the muscle thickness of QL muscle was decreased significantly in hip abduction with LS more than in preferred hip abduction (p<.001), but medio-lateral diameter in the muscle thickness of QL muscle was not significantly different between in preferred hip abduction and in hip abduction with LS (p=.06). The muscle activity of GM was increased significantly in hip abduction with LS more than in preferred hip abduction (p<.001). Conclusion: These findings suggest that hip abduction with LS could be recommended as a hip abduction for LS and a prevention unwanted compensatory pelvic lateral tilting movement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.05a
• /
• pp.3-34
• /
• 1998

The stability condition of rock slopes is greatly affected by the geometry and strength parameters of discontinuities in the rock masses. Rock slopes Involving movement of rock blocks on discontinuities are failed by one or combination of the three basic failure modes-plane, wedge, and toppling. In rock mechanics, practically all the parameters such as the joint set characteristics, the rock strength properties, and the loading conditions are always subject to a degree of uncertainty. Therefore, a reasonable assessment of the rock slope stability has to include the excavation of the multi-failure modes, the consideration of uncertainties of discontinuity characteristics, and the decision on stabilization measures with favorable cost conditions. This study was performed to provide a new numerical model of the deterministic analysis, reliability analysis, and reliability-based optimization for rock slope stability. The sensitivity analysis was carried out to verify proposed method and developed program; the parameters needed for sensitivity analysis are design variables, the variability of discontinuity properties (orientation and strength of discontinuities), the loading conditions, and rock slope geometry properties. The design variables to be optimized by the reliability-based optimization include the cutting angle, the support pressure, and the slope direction. The variability in orientations and friction angle of discontinuities, which can not be considered in the deterministic analysis, has a greatly influenced on the rock slope stability. The stability of rock slopes considering three basic failure modes is more influenced by the selection of slope direction than any other design variables. When either plane or wedge failure is dominant, the support system is more useful than the excavation as a stabilization method. However, the excavation method is more suitable when toppling failure is dominant. The case study shows that the developed reliability-based optimization model can reasonably assess the stability of rock slopes and reduce the construction cost.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.453-458
• /
• 2001

This study was performed to reuse the dyeing wastewater sludge treated by Fenton process through the solidification/stabilization technique. To solidify the dyeing sludge the industrial by-products such as blast furnace slag, fly ash and waste sand with cement were used. The laboratory scale and pilot scale test were conducted at room temperature to make construction brick which has high compressive strength and low leaching of heavy metals. The experimental results showed that blast furnace slag and fly ash could be used instead of cement and the products satisfied the regulation of Korean Standards. The blast furnace slag increased the compressive strength and the optimum ratio of slag/dyeing sludge on dry basis was found 0.4. The solidifying agent of SB series could increase rapidly the compressive strength and the optimum ratio of solidifying agent/sludge on dry basis was 0.26 at which the strength was two times compared with non-added condition. The portion of waste and industrial by-products in matrix was over 80%. From the pilot test the optimum pressure in molding was 100kg/$\textrm{cm}^2$ at which the compressive strength was over 100kg/$\textrm{cm}^2$. And the strength increased continuously to 160kg/$\textrm{cm}^2$ until 120 days curing time due to pozzolanic reaction. When SB-20 as a solidifying agent was used, the unconfined compressive strength of dyeing sludge could be obtained 110kg/$\textrm{cm}^2$ which satisfied the regulation of cement brick in Korea Standard(KS).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.121-131
• /
• 2013

The characteristics of flame dynamics occurring near the bluff body was experimentally investigated in a model combustor with V-gutter bluff body. Measurements of chemiluminescence with high speed camera and PIV were performed for visualization of flame structure. Flashback occurs due to the change of pressure gradient in the combustor, and the flashback distance depends on equivalent ratio. Unstable flames can be classified into three types depending on the flashback distance and structure. When the flame goes over the bluff body, an unusual flame structure occurs at the front of the bluff body. Re-stabilization takes place as the flame moves downstream of the combustor. This process is supported by a strong vortex structure behind the bluff body.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.69-77
• /
• 2005

To optimize and limit the axial length of the baffle of the KSR-III engine, stability rating tests using pulse gun as one of artificial disturbance devices have been done. Generally a rocket engine can be considered to be dynamically stable if a certain imposed external perturbation or pressure oscillation in rocket combustion chamber could be suppressed within a short time period. Decay time and other parameters for the evaluation of stabilization ability of an engine to external perturbation have been analyzed to quantify stabilization capacity of engine, in other words, dynamic stability margin. Baffle not covering flame zone enough which can be considered as collision region of injector wasn't be able to suppress external perturbation sufficiently. The limit of combustion stability margin of engine is assumed to be 50 mm length baffle of the KSR-III engine.

• Physical Therapy Korea
• /
• v.29 no.2
• /
• pp.156-164
• /
• 2022

Background: Low back pain (LBP) is a representative disease, and LBP is characterized by muscle dysfunction that provides stability to the lumbar spine. This causes physical functional problems such as decreased posture control ability by reducing the muscular endurance and balance of the lumbar spine. Pelvic compression using instruments, which has been used during recent stabilization exercises, focuses on the anterior superior iliac spine of the pelvis and puts pressure on the sacroiliac joint during exercise, making the pelvis more symmetrical and stable. Currently, research has been actively conducted on the use of pelvic compression belts and non-elastic pelvic belts; however, few studies have conducted research on the application effect of pelvic compression using instruments. Objects: This study aimed to investigate whether there is a difference in trunk muscular endurance and dynamic and static balance ability levels by applying pelvic stabilization through a pelvic compression device between the LBP group and the non-LBP group. Methods: Thirty-nine subjects currently enrolled in Daejeon University were divided into 20 subjects with LBP group and 19 subjects without LBP (NLBP group), and the groups were compared with and without pelvic compression. The trunk muscular endurance test was performed with 4 movements, the dynamic balance test was performed using a Y-balance test, and the static balance test was performed using a Wii balance board. Results: There was a significant difference the LBP group and the NLBP group after pelvic compression was applied to all tests (p < 0.05). In the static and dynamic balance ability test after pelvic compression was applied, there was a significant difference in the LBP group than in the NLBP group (p < 0.05). Conclusion: These results show that pelvic compression using instruments has a positive effect on both those with and without LBP and that it has a greater impact on balance ability when applied to those with LBP.