• Preventive Nutrition and Food Science
• /
• v.6 no.4
• /
• pp.235-239
• /
• 2001

In order to enhance suitable processing methods of imported Pacific saury, Cololabis saira, storage stability of seasoned-dried Pacific saury (imported product) treated with liquid smoke (T2 product) was compared with a control (C, seasoning only) and T1 (treatment of 0.05% BHT instead of liquid smoke). The histamine contents of 3 seasoned-dried products were within a stable range (9.08 ~ 12.08 mg/100 g) during storage. The water activities of all products were in the 0.698 ~ 0.755 range. The viable cell count of T2 was lower than those of C and T1 during storage. The change in color values of C, T1 and T2 were not significant with increasing storage period. The results of the sensory evaluation during storage showed that the shelf-life of T2 was extended to 60 days, while those of C and T1 were limited to up to 45 days.

• Food Science of Animal Resources
• /
• v.39 no.5
• /
• pp.704-724
• /
• 2019

This study mainly investigated the improvement effect of nitroso-hemoglobin (NO-Hb) and four lactic acid bacteria (LAB) (Streptococcus thermophiles, Lactobacillus bulgaricus, Lactobacillus casei, and Montessori enterococcus) on the color and microbiological qualities of raw beef. Three strains of Escherichia coli, Staphylococcus, Salmonella, and Pseudomonas were used as pathogenic bacteria. The results showed that both NO-Hb and LAB could enhance the color stability and scavenged the spoilage bacteria in a minced beef model. But the improvement effect of NO-Hb was more significant than LAB. This suggested that NO-Hb, as a novel ingredient, could be used as a promising substitute for nitrite in meat products to improve the color and safety of meat products. In addition, low field (LF)-NMR method has been established to be practicable to identify changes in the relaxation times of water and fat caused by different type of bacteria and the storage periods. The number of relaxation components in minced beef was affected by bacteria and increase of the storage period.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.909-913
• /
• 2018

A hydrocarbon trap (HT) plays an important role of controlling vehicle emissions in the so-called cold emission period by holding hydrocarbons until three way catalysts (TWCs) are thermally activated. In this study, we have investigated the adsorption characteristics of cation (H, La, K, and Ag)-exchanged ZSM-5 zeolites for hydrocarbons (propylene, n-butane, and toluene) by DFT (density functional theory)-based computational chemistry. Cation exchange is to improve the hydrothermal stability of zeolites and their adsorption capacity, thereby rendering cation-exchanged zeolites promising materials for HT. The idea of cluster approximation makes the calculation of adsorption energies superbly efficient in computation. The results showed that Ag-exchanged ZSM-5 would be the best for the adsorption of all three adsorbates, without often encountered Ag oxidation in experiments. Besides, the hydrothermal stability of La-exchanged ZSM-5 was confirmed from the change of geometrical parameters by cation exchange, and it showed good adsorption capacity for propylene and toluene. Hydrogen-exchanged ZSM-5 was also good for hydrogen adsorption, but had poor hydrothermal stability.

• Steel and Composite Structures
• /
• v.30 no.2
• /
• pp.185-199
• /
• 2019

Modular construction is an emerging technology to accommodate the increasing restrictions in terms of construction period, energy efficiency and environmental impacts, since each structural module is prefabricated offsite beforehand and assembled onsite using industrialized techniques. However, some innate structural drawbacks of this innovative method are also distinct, such as connection tying inaccessibility, column instability and system robustness. This study aims to explore the theoretical and numerical stability analysis of a tenon-connected square hollow section (SHS) steel column to address the tying and stability issue in modular construction. Due to the excellent performance of composite structures in fire resistance and buckling prevention, concrete-filled steel tube (CFST) columns are also taken into account in the analysis to evaluate the feasibility of adopting composite sections in modular buildings. Characteristic equations with three variables, i.e., the length ratio, the bending stiffness ratio and the rotational stiffness ratio, are generated from the fourth-order governing differential equations. The rotational stiffness ratio is recognized as the most significant factor, with interval analysis conducted for its mechanical significance and domain. Numerical analysis using ABAQUS is conducted for validation of characteristic equations. Recommendations and instructions in predicting the buckling performance of both SHS and CFST columns are then proposed.

• Medical Lasers
• /
• v.9 no.1
• /
• pp.44-50
• /
• 2020

Background and Objectives To evaluate the rotational stability of AcrySof toric intraocular lenses (IOL) by considering lapse of postoperative time and influence of capsulorhexis contraction. Materials and Methods A prospective, masked, single center study was conducted on 19 patients who had undergone microcoaxial cataract surgery and AcrySof toric IOL implantation. Slit-lamp retroillumination photographs of anterior segments were obtained from all patients after 1 week, 1 month and 3 months post-surgery. The degree of alteration of the postoperative IOL axis alignment and the amount of anterior capsular shrinkage were analyzed using Adobe Photoshop software. Results The mean degree of toric IOL axis misalignment was 2.18 (±20.2) degrees at 3 months follow-up. Quadrant analysis of the capsulorhexis aperture area at 1 week and 1 month post-operative, showed counterclockwise IOL rotation when the capsule contraction was dominant in the haptic part as well as clockwise rotation when dominant in the non-haptic part (p = 0.015). Conclusion The direction and degree of AcrySof toric IOL rotation differed throughout the follow-up period. Since most misalignments were found on the first post-operative day, physicians should try to minimize peri-operative risk factors that influence IOL rotation. There was also a correlation between the part of anterior capsule contraction and the direction of IOL rotation.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.2
• /
• pp.147-155
• /
• 2002

In this paper, the regular rotational gaits of the quadruped crawling robot are studied. It is assumed that the proposed regular rotational gaits starts from one of six support patterns in a translational gaits and end up with one of six support patterns in a translational gaits. Noting that six support patterns in a regular translational gait belong to two different groups with respect to regular rotational gait, the static stability margin and the maximum rotational displacement during one rotational stride period for the two representative support patterns are investigated. It is expected that the proposed regular rotational gaits will enhance the omni-directional characteristics of the quadruped crawling robot.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.275-280
• /
• 2011

Due to high-speed of trains, the track deformation increases rapidly and may lead to track irregularities causing the track stability problem. To secure the track stability, the continual inspection on track irregularities is required. The paper presents a methodology for identifying track irregularity using the NARX neural network considering non-linearity in the train structural system. A simulation study has been carried out to examine the proposed method. Acceleration time history data measured at a bogie were re-sampled to every 0.25m track irregularity. In the simulation study, two sets of measured data were simulated. The second data set was obtained by a train with 10% more mass than the one for the first data set. The first set of simulated data was used to train the series-parallel mode of NARX neural network. Then, the track irregularities at the second time period are identified by using the measured acceleration data. The closeness of the identified track irregularity to the actual one is evaluated by PSD and RMSE.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.395-398
• /
• 1997

In the modem manufacturing system, to achieve the unmanned automation, the stability of accuracy is required through a long working period. The thermal deformation of precision machine is predominant in this long time stability. While grinding slender and long workpiece at cylindrical grinding machine, we support workpiece using steadies to prevent the vibration of workpiece. The thermal deformation of the machine by grinding and internal heat source cause processing errors, so the steadies for compensating the thermal deformation in real time are strongly needed. In order to compensate these thermal deformation and grinding processing errors, the device to determine the precise positioning having the stroke of 10.mu.m is necessary. This paper suggests design and make the device to determine the precise positioning using thermoelectric device, to investigate the control characteristics and presents the heat actuator will be very useful in machine tool.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.174-179
• /
• 2004

The paper deals with gravitational effect on dynamic stability of a cantilevered pipe conveying fluid. The eigenvalue branches and modes associated with flutter of cantilevered pipes conveying fluid are fully investigated. Governing equations of motion are derived by extended Hamilton's principle, and the solutions are sought by Galerkin's method. Root locus diagrams are plotted for different values of mass ratio of the pipe, and the order of branch in root locus diagrams is defined. The flutter modes of the pipe at the critical flow velocities are drawn at every one of the twelfth period. The transference of flutter-type instability from one eigenvalue branches to another is investigated thoroughly.

• Tunnel and Underground Space
• /
• v.7 no.3
• /
• pp.208-220
• /
• 1997

To asses the stability of structure around shaft during the excavation of -300 ml hopper room at 2nd shaft in Jangsung mine, some measurements were made with blast monitoring, stressmeter, extensometer and inclinometers. Instrumentations proved to be reliable and data were montiored over six month period. Stressmeters were set at the points of wall and arch of inset gang(level). Induced stresses were measured with the magnitude of 2.81 kgf/$\textrm{cm}^2$(tensile stress) and -4.45kgf/$\textrm{cm}^2$(compressive stress) respectively. These values were converged after two months. The magnitude of axial force in rock bolt was measured with 1.98 ton between the points of M2(2.25m) and M3(1.5 m) but this value was assumed within allowable level. Maximum displacement was also measured with 2 mm at the dephs of 12m from surface. But this value belongs within guide level.