• 대기
• /
• 제23권4호
• /
• pp.443-452
• /
• 2013

The original Fog Stability Index (FSI) is formulated as FSI=$2(T-T_d)+2(T-T_{850})+WS_{850}$, where $T-T_d$ is dew point deficit (temperature-dew point temperature), $T-T_{850}$ is atmospheric stability measure (temperature-temperature at 850 hPa altitude) and $WS_{850}$ is wind speed at 850 hPa altitude. As a way to improve fog prediction at Incheon International Airport (IIA), we develop the modified FSI for IIA, using the meteorological data at IIA for two years from June 2011 to May 2013, the first one year for development and the second one year for validation. The relative contribution of the three parameters of the modified FSI is 9: 1: 0, indicating that $WS_{850}$ is found to be a non-contributing factor for fog formation at IIA. The critical success index (CSI) of the modified FSI is 0.68. Further development is made to consider the fact that fogs at IIA are highly influenced by advection of moisture from the Yellow Sea. One added parameter after statistical evaluation of the several candidate parameters is the dew point deficit at a buoy over the Yellow Sea. The relative contribution of the four parameters (including the new one) of the newly developed FSI is 10: 2: 0.5: 6.4. The CSI of the new FSI is 0.50. Since the developmental period of one year is too short, the FSI should be refined more as the data are accumulated more.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.551-554
• /
• 2001

A necessity of remote control robots or various searching robots etc. that accomplish works given instead of human under long distance and extreme environment such as volcano, universe, deep-sea exploration and nuclear power plant etc. is increasing, and so the development and the research regarding these mobile robots are actively progressing. The wheel mobile robot or the track mobile robot have a sufficient energy efficiency under this en, but also have a lot of limits to accomplish works given which are caused from the restriction of mobile ability. Therefore, recently many researches for the walking robot with superior mobility and energy efficiency on the terrain, which is uneven or where obstacles, inclination and stairways exist, have been doing. The research for these walking robots is separated into fields of mechanism and control system, gait research, circumference environment and system condition recognition etc. greatly. It is a research field that the gait research among these is the centralist in actual implementation of walking robot unlike different mobile robots. A research field for gait of walking robot is classified into two parts according to the nature of the stability and the walking speed, static gait or dynamic gait. While the speed of a static gait is lower than that of a dynamic gait, a static gait which moves the robot to maintain a static stability guarantees a superior stability relatively. A dynamic gait, which make the robot walk controlling the instability caused by the gravity during the two leg supporting period and so maintaining the stability of the robot body spontaneously, is suitable for high speed walking but has a relatively low stability and a difficulty in implementation compared with a static gait. The quadruped walking robot has a strong point that can embody these gaits together. In this research, we will develope an autonomous quadruped robot with an asaptibility to the environment by selectry appropriate gait, element such as duty factor, stride, trajectory, etc.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1885-1898
• /
• 2000

Welding quality is closely related to the arc state. So, it is very important to estimate the arc state in real time. In the short circuit transfer region of CO2 are welding, the spatter , as it is well known, is mainly generated on an instance of short circuit or on an instance that the are is ignited after short circuit, or on the cases of an instantaneous short circuit. If the short circuit period or the arc time is irregular, the spatter is generated more than it is regular. Thus there is a close relationship of the amount of the spatter generation with the arc stability. In this paper, to develop the index for estimating the arc stability in short circuit transfer range Of CO2 arc welding, the welding current and are voltage waveforms were measured and the spatter generated was captured and measured. The correlation analysis of the measured amount of the spatter with the factors (the components and the standard deviations of the components) was performed, and the factors that have a considerable influence on the spatter generation among all factors were selected. And some cases of models consisted of the factors were presented, and a mathematical index model which can make an estimation the amount of the spatter from these models with multiple regression analysis. Also, it was compared how much the amount of the spatter generated under the selected welding conditions do these index models fit, and the index model to estimate the arc stability which represent the spatter generation most appropriately was developed

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.9.1-9.7
• /
• 2015

Background: This study are to identify the symptomatic changes and condylar stability after 2 jaw surgery without preceding treatments for Temporomandibular joints(TMJ) in class III patients with the TMJ symptoms; and to assess therapeutic effect of 2 jaw surgery and the necessity of preceding treatment for alleviation of TMJ symptoms. Methods: 30 prognathic patients with preexisting TMJ symptoms were divided into 2 groups according to presence or absence of preceding treatments before the surgery. We evaluated symptomatic changes on both TMJ by questionnaires and clinical examinations. And we reconstructed 3D cone beam computed tomography images before 2 jaw surgery, immediately after the surgery, and 6 months or more after the surgery with SimPlant software, and analyzed the stability of condylar position on 3D reconstruction model. Significances were assessed by the Wilcoxon signed rank test on SPSS ver. 20.0. Results: Both groups had favorable changes of TMJ symptoms after orthognathic surgery. And postoperative position of condyle had good stability during follow-up period. Conclusion: 2 jaw surgery without preceding treatments for TMD can have therapeutic effect for TMD patients with class III malocclusion.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권3호
• /
• pp.75-83
• /
• 2018

본 연구에서는 일반 버팀보 공법을 개선한 조립식 버팀보 공법을 적용할 때 구조안정성에 대하여 검토하였다. 굴착단계별 가상의 최대 발생 토압력에 대해 좌굴되지 않도록 충분한 강성을 가지는에 대한 안정성검토를 실시하였다. 고강도 조립식 버팀보 공법은 상부플랜지에 일정한 간격으로 볼트 구멍이 천공되어 있는 공법이다. 구조물의 좌굴해석 결과 안전율은 약 5%정도 증가하였고, 발생응력이 허용응력보다 낮기 때문에 버팀보의 구조 안정성은 확보된 것으로 판단된다. 특히 고강도 버팀보 공법을 적용 시 축방향 압축응력은 약 16% 증가한다. 고강도 버팀보 공법은 공사기간을 단축할 수 있으며 추가 부재를 구매할 필요가 없어 경제적이다.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.69-77
• /
• 2005

KSR-III 개발과정에서 배플을 장착하여 연소 불안정 현상을 해결한 바 있으나, 추력 및 냉각과 관련된 축방향 길이에 대한 최적화 과정을 거치지는 않았다. 이에 수동제어기구로서 사용되는 배플의 축방향 길이의 최적화 및 한계를 평가하기 위하여, 축방향 길이를 작동인자로 하여 연소 안정성 여분을 평가하였다. 외부 교란 발생 장치로서 2번의 기폭이 가능한 펄스건을 사용하였다. 외부 교란에 대한 연소실에서의 응답 특성을, 감쇠 시간과 진폭비와 같은 인자를 도입하여 정량화하였다. 설계점과 탈설계점에서 시험을 수행하였으며, 분사기의 충돌점으로 생각할 수 있는 화염 영역을 감싸지 못하는 경우에는 배플의 충분한 감쇠 능력을 보장할 수 없음을 확인하였다. 따라서 연소 안정성의 여분의 경계는 KSR-III에서의 작동조건 하에서 50 mm 정도의 배플인 것으로 판단되었다.

• 보존과학회지
• /
• 제27권1호
• /
• pp.91-100
• /
• 2011

본 연구에서는 열화된 소나무류를 대상으로 PEG 처리 후 조습건조시 적정 PEG농도, 습도 및 시간을 조사하고자 하였고, 조습건조과정 중 치수안정화 효과를 진공동결건조 및 자연건조한 것과 비교하였다. 조습건조에서 PEG의 농도가 높을수록 건조시간이 단축되었으며 치수안정성이 우수하였다. 저농도(40%, 50%) PEG 함침 후 조습건조는 치수안정화 효과가 적었고 목재표면 및 내부에 갈라짐이 발생하였으며 PEG의 분포가 불균일하였다. 고농도(60%, 70%) PEG 함침 후 조습건조를 하였을 때 목재의 표면은 흑화현상으로 인해 색은 어두워졌으나, 저농도(40%) PEG 함침 후 진공동결건조한 것과 비교하여 거의 동일한 치수안정화 효과를 나타내었다. 따라서 대형발굴수침고목재의 보존처리시 진공동결건조가 불가능할 경우 고농도 PEG(70%) 함침 후 조습건조하는 방법이 가능하고, 이때 건조습도와 건조시간을 충분히 고려해서 건조해야 함을 알 수 있었다.

• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.31-36
• /
• 2009

PURPOSE. To determine the change in stability of single-stage, three different design of implant systems in humans utilizing resonance frequency analysis for early healing period(24 weeks), without loading. MATERIAL AND METHODS. Twenty-five patients were included into this study. A total of 45 implants, three different design of implant systems(group A,C,R) were placed in the posterior maxilla or mandible. The specific transducer for each implant system was used. ISQ(implant stability quotient) reading were obtained for each implant at the time of surgery, 3, 6, 8, 10, 12, 24 weeks postoperatively. Data were analyzed for different implant type, bone type, healing time, anatomical locations. RESULTS. For each implant system, a two-factor mixed-model ANOVA demonstrated that a significant effect on ISQ values(group A=0.0022, C=0.017, R=0.0018). For each implant system, in a two-factor mixed model ANOVA, and two-sample t-test, the main effect of jaw position(P > .005) on ISQ values were not significant. CONCLUSIONS. All the implant groups A, C and R, the change patterns of ISQ over time differed by bone type. Implant stability increased greatly between week 0 and week six and showed slow increase between week six and six months(plateau effect).

• 대한약침학회지
• /
• 제18권1호
• /
• pp.44-55
• /
• 2015

Objectives: Scolopendra subspinipes mutilans (S. subspinipes mutilans) is known as a traditional medicine and includes various amino acids, peptides and proteins. The amino acids in the pharmacopuncture extracted from S. subspinipes mutilans by using derivatization methods were analyzed quantitatively and qualitatively by using high performance liquid chromatography (HPLC) over a 12 month period to confirm its stability. Methods: Amino acids of pharmacopuncture extracted from S. subspinipes mutilans were derived by using O-phthaldialdehyde (OPA) & 9-fluorenyl methoxy carbonyl chloride (FMOC) reagent and were analyzed using HPLC. The amino acids were detected by using a diode array detector (DAD) and a fluorescence detector (FLD) to compare a mixed amino acid standard (STD) to the pharmacopuncture from centipedes. The stability tests on the pharmacopuncture from centipedes were done using HPLC for three conditions: a room temperature test chamber, an acceleration test chamber, and a cold test chamber. Results: The pharmacopuncture from centipedes was prepared by using the method of the Korean Pharmacopuncture Institute (KPI) and through quantitative analyses was shown to contain 9 amino acids of the 16 amino acids in the mixed amino acid STD. The amounts of the amino acids in the pharmacopuncture from centipedes were 34.37 ppm of aspartate, 123.72 ppm of arginine, 170.63 ppm of alanine, 59.55 ppm of leucine and 57 ppm of lysine. The relative standard deviation (RSD %) results for the pharmacopuncture from centipedes had a maximum value of 14.95% and minimum value of 1.795% on the room temperature test chamber, the acceleration test chamber and the cold test chamber stability tests. Conclusion: Stability tests on and quantitative and qualitative analyses of the amino acids in the pharmacopuncture extracted from centipedes by using derivatization methods were performed by using HPLC. Through research, we hope to determine the relationship between time and the concentrations of the amino acids in the pharmacopuncture extracted from centipedes.

• 한국환경농학회지
• /
• 제34권1호
• /
• pp.1-5
• /
• 2015

BACKGROUND: The stabilities of the two alkaloidal insecticides of S. flavescens including matrine and oxymatrine are important factor to establish expiry date and usage manual for crop protection. However, the environmental stability of the compounds had not been studied with the extract and its commercial biopesticide. METHODS AND RESULTS: The environmental stabilities of the two alkaloids were performed with extract of S. flavescens, and its two commercial biopesticides both in controlled aquatic and soil conditions. The half-lives of the total matrines for the extract and its two commercial biopesticides were estimated over 200 days both under aerobic and anaerobic water condition. Under dry soil condition, the initial decay rates of the matrines were calculated 0.0804-0.1275 ($t_{1/2}$ 5.4-8.6 days), and the half-lives under wet soil condition were calculated 33.0-231 days. Total soil bacteria on the wet soil ranged 6.0-8.0 log CFU/g-soil during the experiments period. CONCLUSION: The aquatic mixture of the extract showed excellent stability both with the extract and its biopesticides, however, the stability of soil mixture were shorter than the aquatic mixture, suggesting that soil metal consider as a catalyst for the degradation of the two alkaloids.