• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.153-158
• /
• 2000

The purpose of present paper is to prove an improvement on stability of plane Journal bearing due to the leaf spring damper(LSD) experimentally A flexible rotor system is designed and manufackuea in order to generate oil whip instability of journal bearing at relative lower rotating speed. Vibration amplitude and instability onset speeds are investigated for a conventional plane journal bearing and plane journal bearing with LSD. To investigate the damping effects of LSD on stability of bearing, experiments are also conducted on the leaf spring dampers with and without working oil. It is found that the leaf spring damper can considerably increase the instability onset speed of a plane journal bearing.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.1
• /
• pp.9-14
• /
• 1989

Effectiveness of some natural antioxidants were investigated by measuring the physico-chemical charcteristics and fatty acid composition during thermal oxidation in palm oil. Tocopherol showed most enhanced thermal oxidation stabilities compared to the other natural antioxidants. AR spice was no good AOM stability and changes of acid value but the other parameters were obtained desirable results. The changes of linoleic aicd content was slightly decreased during thermal oxidation. Addition of rosemary and glycyrriza extract increased the stabilities of oil less than tocopherol and AR spice. Order of antioxdative effects was tocopherol, AR spice and others. There was no significiant difference in stability of rosemary and glycyrriza extract.

• Tribology and Lubricants
• /
• v.17 no.3
• /
• pp.185-190
• /
• 2001

The purpose of present paper is to prove an improvement on stability of plane journal bearing due to the leaf spring damper (LSD) experimentally. A flexible rotor system is designed and manufactured, in order to generate oil whip instability of journal bearing at relative lower rotating speed. Vibration amplitude and instability onset speeds are investigated for a conventional plane journal bearing and plane journal bearing with LSD. To investigate the damping effects of LSD on stability of bearing, experiments are also conducted on the leaf spring dampers with and without working oil. It is found that the leaf spring damper can considerably increase the instability onset speed of a plane Journal bearing.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.2
• /
• pp.134-138
• /
• 2003

Quality stability of the herb pill coated with edible oils containing rosemary was investigated. Herb pills were made of herb powders such as Panax ginseng, Cinnamomum cassia, Lycium chinense, Zyzyphus jujuba and Zingiber officinale. Rapeseed oil and lubriol were used as edible coating oil. After herb pills coated with edible oils with or without rosemary were stored at $40^{\circ}C$ for 180 days, the microbial viable cell counts and peroxide values(POV) of the herb pill were investigated. After 180 day storage, POVs of herb pills with only rapeseed oil or lubriol were 0.51 and 0.49 meq/kg, respectively. However, when rosemary was added in herb pills the POVs were decreased to 0.30 and 0.39 meq/kg, respectively. The addition of rosemary to the rapeseed oil and lubriol tended to decrease the microbial viable cell counts of the herb pill. The microbial viable cell counts of rapeseed oil and lubriol were 940 and 820CFU/g, respectively after 180 days of storage. However, these levels were suppressed to 720 and 640CFU/g by the resemary addition. On the other hand, the ginseng saponin content of herb pills was not affected by the rosemary addition during storage.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.79-83
• /
• 2009

Acidolysis of olive oil with omega-3 (n-3) polyunsaturated fatty acids (PUFAs) was carried out to produce a structured lipid. Novozym $435^{(R)}$ from Candida antarctica was used as the biocatalyst. Response surface methodology (RSM) was used to determine optimum conditions for lipase-catalyzed enrichment of olive oil. Three factors, 5 levels, central composite design was used. The effects of incubation time, temperature, and substrate mole ratio on incorporation ratio (n-3 fatty acids/total fatty acids, %) were investigated. From the evaluation of response surface graphs, the optimal conditions for incorporation of long chain n-3 PUFAs into olive oil were $40-60^{\circ}C$ for temperature, 30-45 hr for reaction time, and 3:1-5:1 (n-3 fatty acids/olive oil) for substrate mole ratio. Experiments conducted under optimized conditions predicted by the model equation obtained from RSM yielded structured lipids with 50.8% n-3 PUFAs. This value agreed well with that predicted by the model. Oxidative stability tests showed that the product was more susceptible to oxidation than unmodified olive oil. Antioxidant addition improved the oxidative stability of the product.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.231-237
• /
• 2012

In order to use the Schizandra chinensis seed oil as a basic material of cosmetic component, the research was done by analyzed components of Schizandra chinensis seed oil and evaluation it's stability with GC and GC/MSD. As a result, it's main component were showed as palmitic acid and oleic acid. It has excellent stability because it's ingredients did not change under the heat. Also, the antioxidant effect used DPPH(1,1-Diphenyl-2-picrylhydrazyl) test method, indicated higher radical scavenging ability compare to widely-use macademia nut oil and olive oil. Collagen synthesis effect also appeared outstanding. Therefore, the Schizandra chinensis seed oil was determined that it has possibility to be used well for cosmetic material.

• Korean Journal of Food Science and Technology
• /
• v.40 no.6
• /
• pp.621-625
• /
• 2008

Squid oil is an abundant source of polyunsaturated fatty acids. This is particularly true for eicosapentaenoic acid and docosahexaenoic acid. The principal objective of this study was to extend the stability and improve the process aptitude of squid liver oil. Fluidized bed coatings were employed for coating with microencapsulated oil. The efficiency of the fluidized bed coating of the microencapsulated powder was over 90%. The apparent density with zein-DP was 0.6 g/mL, thereby indicating that flow ability had been improved as the result of an increase in specific gravity. The solubility of artificial gastric and enteric fluids with HPMC-FCC was 59.9 and 0%, respectively, whereas with zein-DP solubility was 0 and 31.0%, respectively. Polyunsaturated fatty acid retention results demonstrated that zein-DP coating was higher than HPMC-FCC, followed by the microencapsulated squid liver oil method. These results demonstrated that the application of microencapsulation and fluidized bed micro-coating techniques improved the stability and processing compatibility of squid liver oil.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.840-845
• /
• 1990

An attempt was made in this study to analyze flavor compounds and investigate storage stability of essential oil from garlic distillation. Optimum ratio of solvent between pentane and dichloromethane to get essential oil from garlic distillation was 2 to 1. The yield of essential oil was 0.35%(w/w) in ground garlic(${\phi}\;0.8mm$) and 0.07%(w/w) in whole garlic. From garlic essential oil six components : dimethyl sulfide, diallyl sulfide, methyl-1-propenyl disulfide, diallyl disulfide, allyl methyl sulfide and diallyl trisulfide were identified with GC and GC/MS, and diallyl trisulfide, diallyl disulfide and allyl mothyl sulfide were found to be major volatile components. Quality deterioration of garlic essential oil hardly occurred during storage for 60 days, at $5^{\circ}C$ and $25^{\circ}C$.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.236-242
• /
• 2020

In this paper, we present the improvement in low moisturizing ability and stability that existing skin softeners have due to the low oil content, by developing skin softener using nanoemulsion of phospholipid liposome, based on the properties of nanoemulsion in cosmetic formulation. In this study, two types of oil; dimethicone (DC 200/6cs) or medium chain triglyceride (MCT), and two kinds of lecithin; unsaturated or saturated were respectively applied to produce nanoemulsion. In the particle size analysis of nanoemulsion, the droplet size of nanoemulsion containing DC200/6cs and unsaturated lecithin was the smallest, and all nanoemulsion showed high stability in the measurement of zeta potential. Therefore, with the smallest particle size and high stability, moisture contents and trans epidermal water loss(TEWL) were measured using the skin softener of DC200/6cs and unsaturated lecithin contained nanoemulsion, and the measurement was compared with the non-oil skin softener and the skin softener with only small amount of oil. The results showed that the moisture content of the skin softener using nanoemulsion increased greatly than other two skin softeners, showing high hydration ability and water retention capacity, and TEWL decreased greatly, therefore preventing the evaporation of moisture from the skin. As a result, the oil content and stability of the skin softener was improved by utilizing nanoemulson based of phospholipid liposome, and it is expected to be used in various ways in cosmetic industry.

• Tribology and Lubricants
• /
• v.17 no.2
• /
• pp.146-152
• /
• 2001

Environmentally adapted synthetic base oils of polyalkylene glycols (PAGs) and polyol esters (POEs) show a high polarity because of their functional groups containing oxygen atom. The lubricating performance of these polar base oils was investigated by using a four-ball tribometer under boundary lubrication condition. Four polyalkylene glycols and five polyol ester base oils were used as sample base oils of high polarity. A mineral oil (MO) and alkylnaphthalene (AN) were used as low polarity base oils. Tricrecylphosphate (TCP) was added to all the base oils, in the range of 10 mmol/L-2000 mmol/L, as an antiwear additive. All the TCP-for-mutated base oils showed optimum concentration characteristics for minimizing wear. The order of optimum concentration of all the base oils was in a good accordance with the order of relative stability of TCP in base oils. The interaction model on solvation between additive and different polar base oils can expect the stability order of TCP. Thus, the model on solvation can explain well the order of optimum concentration of all the base oils, by using the effect of polarity (dielectric constant, $\varepsilon$) and molecular size (molecular weight, MW) of them on stability of TCP in polar base oils. Finally, a good correlation of the optimum concentration for all the base oils was obtained when it was arranged as a function of C∝(M $W_{Base Oil}$/M $W_{TCP}$)$^{-2}$.71/.($\varepsilon$$_{Base Oil}$)$^{3.38}$ by these two parameters.s..