• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1172-1179
• /
• 2020

With the establishment of the railway integrated radio network (LTE-R) environment, radio-based train control transmission and reception and various forms of service are provided. The smooth delivery of these services requires improved performance in a highly reliable and available wireless environment. This paper measured the LTE-R radio communication environment to improve radio communication performance of railway integrated wireless network reliability and availability, analyzed the results, and established the wireless environment model. Based on the built-up model, we also proposed an improved radio-access algorithm to control trains for improved reliability, suggesting a way to improve stability for handover that occur during open-air operation, and proposed an algorithm for frequency auto-heating to improve availability. For simulation, data were collected from the Korea Rail Network Authority (Daejeon), Manjong-Gangneung KTX route, which can measure the actual data of LTE-R wireless environment, and the results of the simulation show performance improvement through algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.91-98
• /
• 2021

The installation and performance test of the ISOL (Isotope Separation On Line) system for the generation and separation of Rare Isotopes (RI) beams is in progress at the Rare Isotope Science Project (RISP), Institute for Basic Science (IBS). The various RI beams generated by the ISOL target/ion source go through the beam lines and separators, and only the RI beam desired by the user is selected and transmitted to the superconducting linear accelerator at the downstream of the ISOL. In the ISOL system, two separators are installed to separate a specific RI beam, and control is performed by the Experimental Physics and Industrial Control System (EPICS). In this study, an EPICS IOC (Input-Output Control) was developed to measure the magnetic field of a dipole magnet for mass separation of a multivalent (n+) RI beam in the A/Q separator, which is one of the ISOL RI beam separators. The operational stability of the A/Q separator was tested through a magnetic field measurement using a Hall probe.

• The Journal of Korean Academy of Sensory Integration
• /
• v.19 no.3
• /
• pp.32-43
• /
• 2021

Objective : This study aimed to verify the construct validity of the Korean version of the Peabody Developmental Motor Scale-2 (K-PDMS-2) and its test-retest reliability for children with cerebral palsy (CP) and typical children. Method : To ascertain the construct validity, the K-PDMS-2 evaluation was conducted on 42 children with cerebral palsy and 42 typical children of similar age and gender. Construct validity was proved through comparison with standard scores. Ten of the children with CP were re-evaluated after two weeks to determine test-retest reliability. Results : There was a statistically significant difference in gross motor and fine motor development according to five subtests between the group of children with CP and the typical group (p = .000). For test-retest reliability, the correlation coefficient of the total frequency score was .989, representing very high temporal stability. Conclusion : This study confirmed that K-PDMS-2 is an evaluation tool of high reliability and validity, and a potentially useful future measure for domestic clinical sites and research.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.218-227
• /
• 2022

Purpose: In the case of cavity discovered by ground penetrating radar exploration, it is necessary to accurately predict the filling amount in the cavity in advance, fill the cavity sufficiently and exert strength to ensure stability and prevent ground subsidence. Method: The cavity waveform analysis method by GPR exploration and the method using the cavity shape imaging equipment were performed to measure the cavity shape with irregular size and shape of the actual cavity, and the amount of cavity filling of the injection material was calculated during rapid restoration. Result: The expected filling amount was presented by analyzing the correlation between the cavity size and the filling amount of injection material according to the cavity scale and soil depth through the method by GPR exploration and the cavity scale calculation using the cavity shaping equipment. Conclusion: The cavity scale measured by the cavity imaging equipment was found to be in the range of 20% to 40% of the cavity scale by GPR exploration. In addition, the filling amount of injection material compared to the cavity scale predicted by GPR exploration was in the range of about 60% to 140%, and the filling amount of the injection material compared to the cavity size by the cavity shaping equipment was confirmed to be about 260% to 320 Purpose: The purpose of this study is to examine the types of crimes taking place in the metaverse, and to establish a crime prevention strategy and find a legal deterrent against it. Method: In order to classify crime types in the metaverse, crime types were analyzed based on the results of previous studies and current incidents. Result: Most of the crimes taking place in the metaverse are done in games such as Roblox or Zeppetto. Most of the game users were teenagers. Looking at the types, there are many teens for sexual crimes, violent crimes, and defamation, but professional criminals are often included in copyright infringement, money laundering using virtual currency, and fraud. Conclusion: Since the types of crimes in the metaverse are diverse, various institutional supplementary mechanisms such as establishment of police crime prevention strategies, legal regulations, and law revisions will have to be prepared.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2022

In order to efficiently analysis the stability of a slope, measuring the shear strength of soil is needed. The Standard Penetration Test (SPT) is not appropriate for a slope inspection due to cost and weights. One of the ways to effectively measure the N-value is the Dynamic Cone Penetration Test (DCPT). This study was performed to develop a minimized multi-function sensors that can easily estimate CPT values and Volumetric Water Content. N value with multi-fuction sensor DCPT showed -2.5 ~ +3.9% error compared with the SPT N value (reference value) in the field tests. Also, the developed multi-fuction sensor system was tested the correlation between the CPT test and the portable tester with indoor test. The test result showed 0.85 R2 value in soil, 0.83 in weathered soil, and 0.98 in mixed soil. As a result of the field test, the multi-function sensor shows the excellent field applicability of the proposed sensor system. After further research, it is expected that the portable multi-function sensor will be useful for general slope inspection.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.261-268
• /
• 2022

Purpose: In the case of cavity discovered by ground penetrating radar exploration, it is necessary to accurately predict the filling amount in the cavity in advance, fill the cavity sufficiently and exert strength to ensure stability and prevent ground subsidence. Method: The cavity waveform analysis method by GPR exploration and the method using the cavity shape imaging equipment were performed to measure the cavity shape with irregular size and shape of the actual cavity, and the amount of cavity filling of the injection material was calculated during rapid restoration. Results: The expected filling amount was presented by analyzing the correlation between the cavity size and the filling amount of injection material according to the cavity scale and soil depth through the method by GPR exploration and the cavity scale calculation using the cavity shaping equipment. Conclusion: The cavity scale measured by the cavity imaging equipment was found to be in the range of 20% to 40% of the cavity scale by GPR exploration. In addition, the filling amount of injection material compared to the cavity scale predicted by GPR exploration was in the range of about 60% to 140%, and the filling amount of the injection material compared to the cavity size by the cavity shaping equipment was confirmed to be about 260% to 320%.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.583-591
• /
• 2022

The purpose of this study was to determine the incidence of dental erosion according to the type of lactic acid bacteria fermented oil and to identify a method for preventing dental erosion. For the lactic acid bacteria fermented milk, liquid fermented milk, condense-stirred type fermented milk, and condense-drink type fermented milk were used, and bovine tooth specimens used in the experiment were used. As a method to prevent dental erosion, the method of adding calcium to the lactic acid bacteria fermented milk, the method of applying high and low concentrations of fluoride to the teeth before exposure to the lactic acid bacteria fermented milk, and the method of applying these two methods together were measured to measure the preventive effect of dental erosion. As a result of immersing the specimen in the experimental beverage, the surface hardness of liquid fermented milk decreased the most. When comparing the difference in surface hardness before and after prophylaxis care, the Ca 2% group and the NaF 0.05%+Ca 0.5% group showed no significant difference from the negative control group, confirming that it is an effective method for preventing dental erosion. However, considering the change in taste and the stability of ingredients, a method of adding calcium at a low concentration rather than adding a high concentration of calcium is proposed. Therefore, it is recommended to use low-concentration calcium and low-concentration fluoride together to recognize the possibility of dental erosion when ingesting lactic acid bacteria and to prevent dental erosion caused by it.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.4
• /
• pp.187-197
• /
• 2022

Purpose: This study aimed to investigate the changes in the muscle activity of the trunk stabilizer muscles before and after incorporating Pilates breathing during three types of Pilates chair exercises. Methods: This study included 33 healthy men and women in their 20's; they were recruited according to the inclusion and exclusion criteria. sEMG was used to measure the changes in the muscle activity in the internal oblique/transverse abdominis, rectus abdominis, and erector spinae during the three types of Pilates chair movements (footwork, twist footwork, and bridging) without and with the Pilates breathing integration. The muscle activities of the trunk stabilizers between without and with Pilates breathing were statistically analyzed and compared. Results: The internal oblique/transverse abdominis showed an increase and a significant difference in the muscle activity in all three movements of footwork, twist footwork, and bridging after the Pilates breathing integration (p<.001). The muscle activity of the rectus abdominis (p<.05) and the erector spinae (p<.05) also increased and showed a significant difference after the Pilates breathing incorporation, except in the bridging movement for the erector spinae. The increase in the rate after integrating Pilates breathing was relatively greater in internal oblique/transverse abdominis than in other muscles. Conclusion: When Pilates breathing was applied, the activities of the trunk stabilizer muscles increased significantly and immediately in all three movements of Pilates chair footwork, twist footwork, and bridging. This means that the use of breathing is expected to have a positive and immediate effect on the activation of trunk stabilizers, thus indicating that it can possibly be an effective re-enforcing tool to promote trunk stability when it is integrated to the Pilates chair exercise. Incorporating Pilates breathing also seemed to have a tendency to activate the deep trunk stabilizer muscles more than the superficial stabilizer muscles.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.1
• /
• pp.40-47
• /
• 2022

Purpose: The modified Broström repair (BR) technique has yielded good outcomes in patients with chronic ankle instability. This study compared clinical and radiological outcomes between two groups of patients who underwent modified BR or lateral ligament augmentation using suture tapes (ST). Materials and Methods: Seventy-seven patients (ST group [n=47], BR group [n=30]; body mass index <26.61 kg/m²; mean age, 30.7±11.0 years [range, 17~39 years]; mean follow-up, 34.0±12.0 months [range, 24~59 months]) were retrospectively reviewed between January 2014 and July 2017. The Foot and Ankle Outcome Score (FAOS), American Orthopedic Foot and Ankle Score (AOFAS), Foot and Ankle Ability Measure (FAAM), visual analogue scale (VAS) score, and Sefton grading system were used for clinical assessment. The talar tilt angle and anterior talar translation were measured using the Telos stress device (Telos GmbH, Marburg, Germany) at 150 N for radiological evaluation. Results: FAOS, AOFAS, FAAM, and VAS scores improved in both groups at final follow-up (ST, 91.1±5.2, 93±2, 88.1±4.5, 1.5±0.7 vs. BR, 91.3±5.4, 93±3, 83.3±4.8, 1.2±0.7, respectively; p=0.854, 0.971, <0.001, 0.04, respectively). According to the FAOS, mean sports activity scores for the ST and BR groups at the final follow-up were 90.3±3.2 and 76.6±4.2, respectively, reflecting superior outcomes in the ST group (p<0.001). Sefton grading revealed satisfactory functional outcomes (ST, 91.5% vs. BR, 90.0%). There was significant improvement in the talar tilt angle and anterior talar translation in both the ST and BR groups (7.6°±1.2°, 10.5±1.8 mm vs. 4.9°±1.1°, 7.9±1.5 mm, respectively; p<0.001). Conclusion: The ST group demonstrated comparable clinical but better improvement in mechanical stability and FAOS sports scores than the BR group.

• Physical Therapy Korea
• /
• v.29 no.2
• /
• pp.117-123
• /
• 2022

Background: Push-up are effective exercises for shoulder stability. Previous studies have documented the effects of support plane and hand position and width on muscle activities during a push-up. Objects: This study aimed to investigate the changes in muscle activities in the upper extremity when performing the standard and the knee-flexed push-up with different hand shapes. Methods: A total of twenty-six healthy males participated in this study. Three different hand shapes (finger abduction, finger adduction, and fists) and two types of push-up posture (standard and knee-flexed push-up) were set as the independent variables. Electrograms were used to measure the muscle activity of the upper trapezius (UT), triceps brachii (TB), pectoralis major (PM), and serratus anterior (SA). Each participant performed the randomly assigned push-up to the sound of the metronome. The mixed-effect linear regression model was used to detect the changes in muscle activities after changing the hand shape and push-up posture. Statistical significance was set at α = 0.05. Results: The UT muscle activity was statistically significantly higher when performing push-up with fists than finger abduction (p = 0.035) or finger adduction (p = 0.044). During the standard push-up, the muscle activity in all muscles was that the push-up with fists showed the highest muscle activity compared to the finger abduction (p < 0.01) and finger adduction (p < 0.01). Regardless of the shape of the hand, UT had the lowest muscle activity compared to other muscles (p < 0.001). In contrast, the SA muscle had the highest muscle activity among four muscles during the standard push-up. Conclusion: Based on the results of this study, we suggest hand shape is related to the difficulty level of push-up either in the standard or the knee-flexed push-up, especially in the push-up with fists. In addition, knee push-up can be recommended as shoulder muscle-strengthening exercises for individuals with low shoulder muscle strength.