• The Journal of the Acoustical Society of Korea
• /
• v.10 no.3
• /
• pp.72-82
• /
• 1991

The Magnetic noise generated in three phase induction motor are investigated. Total noises measured by using JEM-1313 code and sound length method and the experimental formulae are derived of magnetic fk={K+$\frac{Z_s}{P}$(1-S)}f[Hz] noise is measured in the stator of induction motor except rotor supplied from power source and their datum are analyzed and compared with one another. The experimental value of magnetic noises are equal to the theoretical value at 1440[Hz] and 1560[Hz]. The biggest magnetic harmonic is generated at 1560[Hz].

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1806-1813
• /
• 2012

This paper proposes a modeling method for hybrid generation system with wind turbine and diesel generator applicable in island area. For modeling objects, squirrel-cage induction generator is considered as wind turbine generator and synchronous generator as diesel generator. Parameters and controllers related to them are established and modeled through analysis of traditional small capacity class. The simulation results for practical size hybrid generation system were suggested.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.219-220
• /
• 2012

본 연구는 3상 보다 많은 장점을 가지는 다상 교류전동기를 연구하기 위하여 개발된 5상 1.5Kw 220V, 60Hz 농형 유도전동기의 특성 개선에 대한 연구결과이다. 연구용으로 개발된 5상 전동기는 정격운전에서 전압변동률, 속도변동률, 역율, 효율 및 운전특성 등이 많이 저하 되어 이에 대한 문제점의 개선를 요구하고 있었다. 이에 따라 기존에 개발된 고정자와 회전자의 철심 코아의 구조는 변화 하지 않고 그대로 고정된 상태를 유지하면서, 고정자 권선의 재설계와 제작을 되풀이하는 시행오차 법에 의해 최적의 전동기를 설계 제작하여 정밀 시험을 통하여 운전특성이 개선된 연구결과를 보여준다. 제시되는 특성실험 결과는 무부하시험, 구속시험, 부하특성실험, FFT 고조파 분석, 전동기의 정수 결정 및 등가회로이다.

• Korean Journal of Veterinary Research
• /
• v.26 no.1
• /
• pp.19-30
• /
• 1986

Endocrine cells were observed in the gastrointestinal tract of the squirrels by light microscopy using Grimelius and Masson-Hamperl silver impregnation, and in the stomach and duodenum by electron microscopy. Light microscopically, argyrophil cell decreased gradually in number in the pyloric region and ileum, stomach, duodenum and jejunum and rectum in the order listed. Argentaffin cells were moderately distributed in the stomach, pyloric region and duodenum, while absent in the jejunum, ileum and rectum. Five kinds of cell types, EC, ECL, D, $D_1$ and G cells were identified in the stomach and three kinds of cell types, S, $EC_1$ and $EC_2$ were also identified in the duodenum by electron microscopy. A cilium noted in the cytoplasm of $D_1$-type cell. The species differences in the distribution, size and structure of the secretory granules were discussed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.21-25
• /
• 2004

This paper suggests the techniques in determining the values of the steady-state equivalent circuit parameters of a three-phase squirrel-cage induction machine using immune algorithm. The parameter estimation procedure is based on the steady state phase current versus slip and input power versus slip characteristics. The proposed estimation algorithm is of a nonlinear kind based on clonal selection in immune algorithm. The machine parameters are obtained as the solution of a minimization of least-squares cost function by immune algorithm. Simulation shows better results than the conventional approaches.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.103-107
• /
• 2016

In general, the voltage stability of induction generator is lower than synchronous generator. Induction generator has a number of advantages over the synchronous generator on the side of price and maintenance. So Induction generator has been applied to the small hydroelectric power of low output. Induction generator usually generates a high current during grid connection. The high current that occurs during grid connection can cause a voltage drop in the system. In order to increase the supply of the induction generator, it is necessary to propose a method of reducing high current. This paper proposes some method of the soft start to reduce voltage drop caused by the large starting current. soft-start method has high voltage drop effect than direct start method, control of firing angle can be increased the voltage drop effect.

• New & Renewable Energy
• /
• v.10 no.4
• /
• pp.3-8
• /
• 2014

Both of induction generator and synchronous generator is available in the hydroelectric power plant. If the output of the power station is large, the synchronous generator is mainly used but when its output is low, the induction generator is often used. If the output capacity is small, there is a case in which induction motor is used as a generator. Torque at rated operation and start of the induction motor is different depending on the shape of the rotor. Small and medium-sized squirrel-cage induction motor is used primarily double cage rotor or deep bar. In this study, we attempt to interpret characteristics for double cage rotor or deep bar that occur when operating in the induction generator based on the parameters that have been designed and manufactured as an induction motor.

• Progress in Superconductivity and Cryogenics
• /
• v.2 no.2
• /
• pp.44-48
• /
• 2000

The high temperature superconducting bulk can be used as the rotor of an ac motor. This paper presents the fabrication and test results of a ac motor with HTS bulk rotor. The rotor of a conventional squirrel cage induction motor was replaced with cylinder type YBCO bulk. Height and outer diameter of the HTS bulk was 15mm and 46mm, respectively. Eddy current brake using aluminium disk was used to measure the torque of the HTS motor. No load test, locked rotor test and load test were performed to examine the characteristics of the HTS motor. Test results show the motor can rotate at synchronous speed without any special starting circuit. Maximum output power of the constructed HTS motor was 408W.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1482-1484
• /
• 1996

To apply Magnetic wedges to the motor, comparing with not applying, showes its performance change of efficiency increse, reduction of temperature rise, harmonics, and magnetic noise. The motor specification and test condition are 37kW-4P-380V-60Hz,squirrel-cage, three phase induction motor with semiclosed type slots. The result of load test to compare with nonmagnetic wedges showed 1.5% increment of efficiency at 100% load and $8.0^{\circ}C$ decrement of temperature rise at stator coil. And for developing the magnetic wedge matrial, its manufacturing process was setting and TG-DTA, optical microscope, SEM, bending strength and permeability were investigated into the material made of through the process.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.9-11
• /
• 1995

In this paper, tile squirrel case induction motors required multi-objective function are designed. As the objective function of the optimization program, we select the linear combination of loss and mass of motors by using weighting factors. Optimization process is performed by using the evolution strategy (ES). ES is the algorithm that can find the global minimum. To verify validity of the proposed method, a sample design is tried.