• The Journal of Korean Physical Therapy
• /
• v.31 no.5
• /
• pp.322-327
• /
• 2019

Purpose: This study examined the influence of the maximal aerobic capacity on the two-year cardiac-related re-hospitalization in patients with heart failure with a reduced ejection fraction (HFrEF) in Korean society. Methods: The maximal aerobic capacity of the study population (n=95, male 63%) was evaluated using a cardiopulmonary exercise (CPX) testing system. Each patient was followed up for two years to divide the HFrEF patients into two groups according to cardiac-related re-hospitalization: re-hospitalization (RH) group (n=29, 30%) and no re-hospitalization (NRH) group (n=66, 70%). Results: The relative peak $VO_2$ (mL/kg/min, p<0.001), exercise duration (p<0.001), respiratory exchange ratio ($VCO_2/VO_2$, p=0.001), systolic blood pressure (SBP) reserve (p=0.004), heart rate (HR) reserve (p=0.007), SBP max (p=0.02), and HR max (p=0.039) were significantly lower in the RH group than the NRH group during the CPX test. On the other hand, the ventilatory efficiency (VE/VCO2 slope, p=0.02) and age (p=0.022) were significantly higher in the RH group than in the NRH group. In binary logistic regression analysis, the relative peak $VO_2$ (p=0.001, Wald Chi-square 10.137) was the strongest predictive factor on cardiac-related re-hospitalization, which was followed by $VCO_2/VO_2$ (p=0.019, Wald Chi-square 5.54). On the other hand, age (p=0.063, Wald Chi-square 3.445) did not have a significant influence on cardiac related re-hospitalization. Conclusion: The maximal aerobic capacity, especially the relative peak $VO_2$, is the strongest factor on cardiac-related re-hospitalization within two years in patients with HFrEF in Korean society.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.380-383
• /
• 1999

본 논문은 Booth 알고리즘을 사용하는 새로운 VQB제산기를 제안한다. 본 논문은 Macsorley의 제산 알고리즘에 기본 원리가 같은 제곱근 알고리즘을 추가하였으며, 이를 VQB 알고리즘이라고 명명하였다. 본 논문은 VQB 제산기의 두 가지 설계를 구현하였다. 하나는 계수를 사용하지 않는 설계 (A) 이며, 둘은 [1/2, 2]의 계수군을 사용하는 설계 (B)이다. 설계 (A)는 순환할때마다 2.54 비트의 부분 몫을 결정하며 설계 (B)는 2.74 비트를 결정한다. 본 논문은 VQB 제산기의 성능지표를 좌우하는 제곱근을 위주로 하여 SRT 제산기와의 비교를 시도하였다. VQB 는 처리량과 설계 노력 면에서 SRT를 앞서며, 면적과 임계지연 면에서는 SRT와 서로 견줄만한 수준이다. 표준셀 0.35㎛ CMOS 공정으로 구현될 때, 설계 (A)의 임계지연은 9.69㎱ 이며, 설계 (B)는 11.05㎱이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1504-1526
• /
• 2018

For uplink multi-user massive MIMO systems, conventional minimum mean square error (MMSE) linear detection method achieves near-optimal performance when the number of antennas at base station is much larger than that of the single-antenna users. However, MMSE detection involves complicated matrix inversion, thus making it cumbersome to be implemented cost-effectively and rapidly. In this paper, we first summarize in detail the state-of-the-art simplified MMSE detection algorithms that circumvent the complicated matrix inversion and hence reduce the computation complexity from ${\mathcal{O}}(K^3)$ to ${\mathcal{O}}(K^2)$ or ${\mathcal{O}}(NK)$ with some certain performance sacrifice. Meanwhile, we divide the simplified algorithms into two categories, namely the matrix inversion approximation and the classical iterative linear equation solving methods, and make comparisons between them in terms of detection performance and computation complexity. In order to further optimize the detection performance of the existing detection algorithms, we propose more proper solutions to set the initial values and relaxation parameters, and present a new way of reconstructing the exact effective noise variance to accelerate the convergence speed. Analysis and simulation results verify that with the help of proper initial values and parameters, the simplified matrix inversion based detection algorithms can achieve detection performance quite close to that of the ideal matrix inversion based MMSE algorithm with only a small number of series expansions or iterations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.73-82
• /
• 2014

The LM algorithm is used in solving the least square problem in a non linear system, and is used in various fields. However, in cases the applied field's target functionis complicated and high-dimensional, it takes a lot of time solving the inner matrix and vector operations. In such cases, the LM algorithm is unsuitable in embedded environment and requires a hardware accelerator. In this paper, we implemented the LM algorithm in hardware. In the implementation, we used pipeline stages to divide the target function operation, and reduced the period of data input of the matrix and vector operations in order to accelerate the speed. To measure the performance of the implemented hardware, we applied the refining fundamental matrix(RFM), which is a part of 3D reconstruction application. As a result, the implemented system showed similar performance compared to software, and the execution speed increased in a product of 74.3.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.47-56
• /
• 2012

This research is to develop satiable battery charger with a variety of capacity and voltage specifications of battery. For this, voltage or current were controlled through buck converter which is DC voltage that already received three-phase at primary side and passed bridge rectifier diode. And, it was comprised of full-bridge converter and HFTR for insulation and a square wave AC. The transformer primary side was comprised in series to divide certain charging current and the secondly side was comprised of 6 fixed transformers so that they can generate certain amount of power and various output voltage through relay parallel compound 6 DC Link outputs. To confirm such structure's verification and validity, simulation with PSIM was conducted, and validity of proposed variable charger system was verified through 3kW stack production.

• The Journal of Natural Sciences
• /
• v.13 no.1
• /
• pp.129-146
• /
• 2003

The purpose of this research were to study TV home-shopping customers' pursuing benefits when purchasing clothing, to segment customer groups by pursuing benefits, and to investigate differences of purchasing behavior and demographic variables among these groups. The subjects for final analysis were 302 females over twenty, living in Seoul, Gyeonggi province, and Daejeon. The statistics used for analysis were factor analysis, cluster analysis, $Cronbach-\alpha$, one way ANOVA, Duncan test and chi-square analysis y the SPSS program.The result of this study were as follows: 1. The factors of pursuing benefits were classified into seven: convenience of purchase, convenience of shopping time, low prices, diversity of item and presenting manners, convenience of physical inaction, pursuing of information, and convenience of return and exchange. 2. The customers were divide into four groups by factors of pursuing benefits: high pursuing group, moderate pursuing group, low pursuing group, and information pursuing group. 3. The purchasing behaviors, like experience and intention of purchase, and occupation were significantly different among these groups.

• Journal of the Korean Home Economics Association
• /
• v.48 no.8
• /
• pp.113-128
• /
• 2010

The purposes of this study were 1) to divide consumers into segments according to their consumption attitude and subjective knowledge about natural dyed products 2) to develop a profile for each segment with respect to the media types, the preferred media programs, the information sources, the lifestyle activities and the demographics. Data(n = 213) was collected using questionnaires via the internet. By cluster analysis of the consumers' attitude and their subjective knowledge about natural dyed products, four groups were identified 1) the loyal consumption group (20.1%), 2) the conditional/reluctant consumption group(36.6%), 3) the negative/reluctant consumption group(24.2%) and 4) the non purchasers(19.1%). Several characteristics of these four groups were then compared by ANOVA and chi-square statistics. The results indicated that the consumption attitude and subjective knowledge could be the criteria for segmenting the consumers and that the segmented groups had unique consumer characteristics. Implications of this study were discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.723-730
• /
• 2017

In this paper, we consider an online compensation algorithm considering the mutual coupling and suggest a new GPS antenna array to apply. To evaluate the anti-jamming performance for the proposed antenna array, ULA and URA, we divide direction finding of multiple jamming signals into environments. 1. there is no mutual coupling. 2. there is mutual coupling but no compensation. 3. mutual coupling is compensated. RMSE analysis showed that the online compensation algorithm works and that peak detection is possible for multiple jamming signals.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.201-203
• /
• 2007

The paper concerns the successive optimization for structure and parameters of fuzzy inference systems that is based on parallel Genetic Algorithms (PGA) and information data granulation (IG). PGA is multi, population based genetic algorithms, and it is used tu optimize structure and parameters of fuzzy model simultaneously, The granulation is realized with the aid of the C-means clustering. The concept of information granulation was applied to the fuzzy model in order to enhance the abilities of structural optimization. By doing that, we divide the input space to form the premise part of the fuzzy rules and the consequence part of each fuzzy rule is newly' organized based on center points of data group extracted by the C-Means clustering, It concerns the fuzzy model related parameters such as the number of input variables to be used in fuzzy model. a collection of specific subset of input variables, the number of membership functions according to used variables, and the polynomial type of the consequence part of fuzzy rules, The simultaneous optimization mechanism is explored. It can find optimal values related to structure and parameter of fuzzy model via PGA, the C-means clustering and standard least square method at once. A comparative analysis demonstrates that the Dnmosed algorithm is superior to the conventional methods.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.2
• /
• pp.153-160
• /
• 2013

This research paper describes the development of battery charger with a variable output voltage capacity for charging the batteries used in electrical vehicles. The voltage and current accordingly is control via the buck converter that receives three phase current at primary side and fed to bridge rectifier which is comprised of full bridge converter and HFTR(High Frequency Transformer) for isolation and a square wave AC output. The transformer primary side is in series to divide certain charging current and the secondary side is comprised of six fix transformers so that they can generate certain amount of power and various output voltage through relay connection using 6 DC outputs. Moreover, all parallel connected full bridge serial resonant converter communicate together with upper(main) controller. The constructed structure is verified by conducting the test on PSIM as well as experimentally.