• 대한토목학회논문집
• /
• 제40권1호
• /
• pp.69-76
• /
• 2020

도로의 부속시설인 교량은 시공과정에서 콘크리트 및 강재와 같이 환경영향이 큰 자원을 다량 소비하며 이로 인해 큰 환경적 부담을 발생시킨다. 교량의 시공으로 인해 발생하는 환경영향을 줄이기 위해서는 초기 설계단계에서 합리적인 자료를 토대로 환경영향에 대한 검토가 수행되어야 한다. 이 연구는 초기 설계단계의 교량형식 선정과정에서 LCA (Life Cycle Assessment) 기반의 환경영향평가가 가능한 기초자료를 제공하고자 하였다. 이를 위해 기 시공된 4가지 형식(일반 PSC거더, IPC거더, e-Beam, DR거더)의 PSC교량에 대한 설계자료를 수집하고 LCA를 수행하여 환경부하 원단위값과 영향요인을 분석하였다. 분석결과 IPC거더의 환경영향이 가장 작게 나타났고, e-Beam의 환경영향은 IPC거더 보다 133.7% 크게 평가되었다. 또한 콘크리트, 철근, PC강연선, 각재, 쉬즈관, 강판이 PSC거더 전체 환경영향의 약 98.5%를 발생시키는 주요인자로 도출되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권3호
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• 건축역사연구
• /
• 제20권3호
• /
• pp.23-38
• /
• 2011

The Axes and Adzes are the oldest tools since the beginning of human history which is used to cut the tree and make part of architecture such as boards, square timber etc. Nowadays, these old woodworking tools especially "Jagui(자귀)" (adze) has been almost disappeared at the working site of residential and cultural properties. It is necessary to study Korean traditional woodworking tools to keep Korean traditional skill and technology. It has been reviewed the change of shape of "Jagui(자귀)" (adze) from before Samhan (삼한) period to Joseon Dynasty through excavated relics and paintings and summarize as follows: Based on excavation relics of Dahori, both plate type blade and pocket type blade are used for "Tokki(도끼)" (axe) and "Jagui(자귀)" (adze). The excavated "Jagui(자귀)" (adze) from Jeongbaikri 356 tomb, near Pyongyang is prototype of "Jagui(자귀)" (adze) used nowdays which has almost same shape as well as the insert method of blade and handle. The auxiliary handle is inserted to blade and the main handle is inserted to the auxiliary handle which is different from the method of Chinese and Japanese "Jagui(자귀)" (adze). The length of handle of "Jagui(자귀)" (adze) until late Joseon Dynasty is short by which we assume it is used for a sitting position as hand held Jagui and from that time long handle has been introduced for a standing position which is called "Sunjagui(선자귀)". "Jagui(자귀)" (adze) has been used since the beginning of human history but it is almost disappeared at the most of woodworking site which is the crisis of Korean traditional architecture and we have to do something to keep it.

• 대한원격탐사학회지
• /
• 제38권6_2호
• /
• pp.1723-1735
• /
• 2022

산사태는 가장 널리 퍼진 자연재해 중 하나로 인명 및 재산피해 뿐만 아니라 범 국가적 차원의 피해를 유발할 수 있기 때문에 효과적인 예측 및 예방이 필수적이다. 높은 정확도를 갖는 산사태 취약성도를 제작하려는 연구는 꾸준히 진행되고 있으며 다양한 모델이 산사태 취약성 분석에 적용되어 왔다. 빈도비 모델, logistic regression 모델, ensembles 모델, 인공신경망 등의 모델과 같이 픽셀기반 머신러닝 모델들이 주로 적용되어 왔고 최근 연구에서는 커널기반의 합성곱신경망 기법이 효과적이라는 사실과 함께 입력자료의 공간적 특성이 산사태 취약성 매핑의 정확도에 중요한 영향을 미친다는 사실이 알려졌다. 이러한 이유로 본 연구에서는 픽셀기반 deep neural network (DNN) 모델과 패치기반 convolutional neural network (CNN) 모델을 이용하여 산사태 취약성을 분석하는 것을 목적으로 한다. 연구지역은 산사태 발생 빈도가 높고 피해가 큰 인제, 강릉, 평창을 포함한 강원도 지역으로 설정하였고, 산사태 관련인자로는 경사도, 곡률, 하천강도지수, 지형습윤지수, 지형위치 지수, 임상경급, 임상영급, 암상, 토지이용, 유효토심, 토양모재, 선구조 밀도, 단층 밀도, 정규식생지수, 정규수분지수의 15개 데이터를 이용하였다. 데이터 전처리 과정을 통해 산사태관련인자를 공간데이터베이스로 구축하였으며 DNN, CNN 모델을 이용하여 산사태 취약성도를 작성하였다. 정량적인 지표를 통해 모델과 산사태 취약성도에 대한 검증을 진행하였으며 검증결과 패치기반의 CNN 모델에서 픽셀기반의 DNN 모델에 비해 3.4% 향상된 성능을 보였다. 본 연구의 결과는 산사태를 예측하는데 사용될 수 있고 토지 이용 정책 및 산사태 관리에 관한 정책 수립에 있어 기초자료 역할을 할 수 있을 것으로 기대된다.

• 건축역사연구
• /
• 제18권5호
• /
• pp.59-80
• /
• 2009

The purpose of this study is to investigate the history, space structures, blueprint, and techniques of the construction of Nam-hea city walls. Nam-hea city walls were relocated in 1439 from Whagumhun-Sansung(火金峴山城) to the present site, nearby Nam-hea Um.(南海邑) The city walls were rebuilt after they were demolished during Japanese invasion on Korea in 1592 and their reconstruction was also done in 1757. At present, the city walls only partially remained due to the urbanization of the areas around them. A plane form of the City wall is a square, and the circumference os approximately 1.3km. According to the literature, the circumference of the castle walls is 2,876尺, the height is 13尺, and the width is 13尺 4寸. Hang-Kyo(鄕校). SaGikDan(社稷壇), YoeDan(厲壇), SunSo(船所) which is a harbor, as well as government and public offices such as Kaek-Sa(客舍) and Dong-Hun(東軒) existed inside the castle walls. Inside the castle walls were one well, five springs, one ditch, and one pond, and in the castle walls, four castle gates, three curved castle walls, and 590 battlements existed. The main government offices inside castle walls were composed of Kaek-Sa, Dong-Hun, and Han-Chung(鄕廳) their arrangements were as follows. Kaek-Sa was situated toward North. Dong-Hun was situated in the center of the west castle walls. The main roads were constructed to connect the North and South castle gate, and subsidiary roads were constructed to connect the East and West castle gate. The measurement used in the blueprint for castle wall was Pobaek-scale(布帛尺:1尺=46.66cm), and one side of it was 700尺. South and North gate were constructed in the center of South and North castle wall, and curved castle walls was situated there. One bastion was in the west of curved castle walls and two bastions were in the east of curved castle walls. The east gate was located in the five eighths of in the east castle wall. Two bastions were situated in the north, on bastion in the south, one bastion in the south, and four bastions in the west castle wall. The castle walls were constructed in the following order: construction of castle field, construction of castle foundation, construction of castle wall, and cover the castle foundation. The techniques used in the construction of the castle walls include timber pile(friction pile), replacement method by excavation.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.301-308
• /
• 2014

국토면적의 약 64%가 산림으로 구성되어 OECD 국가 중 네 번째로 산림면적의 비율이 높은 편임에도 원목 생산보다는 녹화에 초점을 맞추어 진행된 조림의 결과로 국내 목재자급률은 약 16.2%에 불구하다. 본 연구에서는 국산 간벌재로부터 소경각재를 생산하여 다중접착을 통해 기둥과 보 등의 다양한 구조용 집성재 제조하기 위하여 핑거조인트가 포함된 소경각재의 휨 성능을 핑거조인트가 없는 소경각재의 휨 성능과 비교하였으며 시험결과를 ASTM D2915에 따라 통계처리를 실시하여 허용응력을 산출하고 상호 비교 평가하였다. 기존의 구조용 집성재 생산라인에서 50 mm 이하의 층재에 대하여 사용하였던 핑거조인트 기계를 사용하여 제조된 핑거조인트 소경각재는 핑거조인트가 없는 부재에 비하여 50% 이하의 휨강도를 나타낸 반면 개선된 핑거조인트 방법을 적용하여 제조된 핑거조인트 부재는 약 80% 정도의 휨강도를 나타내었다. 또한, ASTM D 2915에 따라 핑거조인트가 없는 소경각재 및 핑거조인트가 포함된 소경각재의 허용 휨응력은 각각 12 MPa 및 11.4 MPa로 나타났다. 핑거조인트가 있는 소경각재의 경우에 핑거조인트가 없는 부재보다 강도의 편차가 적었으며, MOR은 약 80% 수준을 나타내었으나 허용 휨응력은 약 95% 수준을 나타내었다.