• Journal of the Korean Wood Science and Technology
• /
• 제45권1호
• /
• pp.20-27
• /
• 2017

본 연구의 목적은 목재의 세 주요 축 방향에 대하여 각 방향별 탄성계수를 비파괴적으로 측정하여 이에 따른 목재의 이방성을 검토해 보고자 하였다. 결점이 없는 SPF (spruce-pine-fir)와 Hem-fir 및 낙엽송재에 대하여 무결점 시험편을 채취하고 각 시험편에 대해 세 방향에서 초음파 속도를 측정한 다음, 이 속도와 각 재료의 밀도를 이용하여 산정된 탄성계수를 비교하였다. 시험 결과 초음파속도 및 탄성계수는 방향별로 목재의 길이방향, 방사방향, 접선방향의 순으로 나타났으며, 밀도가 높을수록 각 방향별 탄성계수가 더 높게 나타났다. 수종 간에 있어서 길이방향의 탄성계수의 차이보다 방사방향, 접선방향의 차이가 더 크게 나타났다. 산정된 탄성계수를 사용하여 재료의 이방성을 비교하여 제시하였으며, 이를 통해 강성매트릭스의 대각선 항을 산정하였다.

• 한국산림과학회지
• /
• 제94권5호통권162호
• /
• pp.321-329
• /
• 2005

Based on the data representing four typical Korean pine forest types, the age structure, DBH distribution, species composition, and forking rule were systemically analyzed for old-growth Korean pine forest in Liangshui Nature Reserve, northeast China. The age structure of Korean pine trees was strongly uneven-aged with one dominated peak following normal distribution, and age of trees varied from 100 to 180 years within a stand. The DBH and height differences in same age class (20 years) varied from 28 cm~64 cm and 5 to 20 m, respectively. Many conifer and hard wood species, such as spruce, fir, costata birch, basswood, oak, and elm, were mixed with dominated trees of Korean pine. The canopy of the old-growth Korean pine forest can be divided into two layers, and differences of mean age and height between Layer I and Layer II were ranged 80~150 years and 7~13 m, respectively. The Weibull function was used to model the diameter distribution and performed well to describe size-class distribution either with a single peak in over-story canopy and inverse J-shape in under-story canopy for old-growth Korean pine stands. The forking height of Korean pine trees ranged from 16m to 24 m (mean 19.4 m) and tree age about 120 to 160 years old. The results will provide a scientific basis to protect and recover the ecosystem of natural old-growth Korean pine and also provide the model in management of Korean pine plantation.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.66-76
• /
• 2008

최근 국내에서 급격히 그 수요가 증가하고 있는 낙엽송과 북미산 SPF(spruce-pine-fir) 규격재의 구조부재로서의 이용에 있어서 가장 간단하면서 많이 이용되는 파스너(fastener)인 못을 이용한 접합에 대해 그 전단성능을 검토하였다. 못접합은 특히 경골목구조(light frame construction)에서는 최적의 시공법으로 인식되고 있으며, 북미와 일본을 중심으로 못접합부에 대한 연구는 많이 진행되어 왔다. 현재 국내의 경골목구조와 기둥-보 공법에서 많이 이용되고 있는 구조부재(축재와 면재)의 못을 이용한 못접합부에 대해 그 전단성능의 기초적인 검토를 행하였다. 못접합부는 면재를 개입한 상태에서 주부재와 측면부재의 방향성에 따라 구분하여 주부재의 방향, 측면부재의 방향, 못의 종류에 따라 전단시험을 행하여 각각의 방향에 따른 못접합부의 전단성능을 비교 검토하였다. SPF 스터드재에 있어서는 낙엽송 집성재나 낙엽송 소재에 비해 못의 종류, 주부재와 면재의 방향성에 따른 전단성능의 차이가 현저하게 나타났다. 또한, 항복내력 및 최대내력과 접합계수와의 관계는 부재간의 배치상태에 따라 다르게 나타났다.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.1-8
• /
• 2009

Mountain Pine Beetle (MPB) attacked pine was evaluated for pulp quality, chemical and physical properties, and bleachability. Chemical analyses showed that the dehydroabietic acid and total acetone extractives content were higher in the year 3 (grey) attacked MPB chips and lower in the year 5 (grey) attacked MPB chips as compared to a typical SPF (spruce/pine/fir) reference. Lignin and carbohydrate content of the MPB wood chips were comparable to the SPF. Similarly, there was little difference in kappa number, pulp yield and liquor consumption between the 3 and 5 year MPB attacked wood. Likewise there was no significant difference in the resulting tear strength, burst, or tensile strength. There appeared to be an improved bleaching response in the MPB attacked pulp as compared to the SPF reference, but this was accompanied by a slightly lower bleached pulp yield and higher bleach filtrate COD and solids content.

• Journal of Plant Biology
• /
• 제25권1호
• /
• pp.37-53
• /
• 1982

Pollen analysis from lake districts, Youngnangho, Wolhamji and Bangeojin, revealed vegetational patterns in Korea. The pollen stratigraphy was divided into five zones, zone L, I, II, IIIa and IIIb for the past 15,000 years. During zone L (earlier than 10,500 yr BP), late-glacial period, Youngnangho was vegetated with a coniferous forest dominated by spruce, larch, haploxylon pine and fir with considerable amount of herbs. Zone I(10,500~7500 yr BP) was predominantly herbaceous vegetationj with significant amount of oak and diploxylon pine. It suggests that the overall environment became milder and drier than late-glacial period. Zone II(7,500~4,000 yr BP), hypsithermal period, showed significant warming condition, indicated by high pollen concentrations of oak, diploxylon pine and hornbeam, and by more diverse flora of deciduous broad-leaved trees than before. Herbs were not an important part of vegetation. Zone III$^a$(4,000~1,500 yr BP) had pine and oak as main elements. Birch increased slightly while hornbeam decreased in this time. It indicates cooling condition. Zone III$^b$(1,5000-present) which can be called pine period showed obvious human interference. Following forest clearance, agriculture was intensified. The beginning of logging and agriculture was discernible by a sudden decline of arboreal species and by considerable amount of rice, buckwheat, sorrel and plantain. Numerous charcoal fragments were observed in zone I and zone III$^b$.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.245-252
• /
• 2020

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.311-323
• /
• 2019

The number of newly constructed traditional Korean houses, i.e., Hanoks, and light-frame buildings is increasing. However, related research is limited owing to the lack of awareness regarding safety evaluations. Therefore, this study conducted an outdoor exposure test to accurately evaluate wooden constructions. Spruce, pine, and fir (SPF) material was monitored for a year, wherein the SPF material was artificially dried under 18% moisture content, and its physical properties and color differences were measured once a month. Large differences were observed in the material's weight and moisture content, which are indexes sensitive to daily range and rainfall; however, no significant difference was found for other basic properties in the pre and post test results. Herein, $L^*$, $a^*$, and $b^*$ values represent color differences; these values exhibited a general decrease after the test. Such differences were attributed to the loss of lignin in the wood. The color difference value was high between the months of May and July, when the daily range and rainfall significantly fluctuated. Multiple regression analysis was performed on the $a^*$ value (redness indicator), daily range, rainfall, and ultraviolet index. The results indicated that the daily range influenced redness the most. According to the estimated regression equation, the daily range and redness are positively correlated. Based on the results, the types and influence of independent variables on color difference are expected to change as the wood's duration of outdoor exposure and the amount of data obtained both increase.

• 농업과학연구
• /
• 제9권1호
• /
• pp.239-249
• /
• 1982

서독(西獨), 스웨덴, 네덜란드의 삼림(森林)에서 수종혼교(樹種混交), 수령(樹令), 임관(林冠), 임분(林分)의 생태적(生態的) 조건(條件)을 포함(包含)한 우량임분(優良林分)의 개요(槪要)가 조사(調査)되었다. 우량종자생산(優良種子生産)을 위(爲)한 채종원(採種園)의 조성계획(造成計劃) 또한 본(本) 연구(硏究)에서 검토(檢討)되었다. 1. 강수량(降水量)이 많고 상대습도(相對濕度)가 높은 기상조건(氣象條件)은 고위도(高緯度)에 위치(位置)한 Scandinavia 반도(半島)와 서북(西北) Europe지방(地方)이 해양성기후(海洋性氣候)임을 입증(立證)한다. 일장(日長)에 따른 광주성(光週性)과 강상시기(降霜時期)는 스웨덴 산림(山林)에서 bud-setting과 bud-flushing에 따른 나무의 적응성(適應性)은 생장(生長) pattern과 수종(樹種)의 분포(分布)를 결정(決定)한다. 2. 유럽의 산림(山林)은 독일가문비나무, 유럽소나무, 전나무, 너도밤나무, 참나무류(類), 유럽잎갈나무를 포함하는 고목(高木)으로 구성된 상층임관(上層林冠)과 가문비나무, 전나무, 너도밤나무등의 내음성(耐陰性) 수종의 하층임관(下層林冠)과 자작나무, 참나무, 서나무를 포함하는 유치수(幼稚樹)의 하층지피식생(下層地被植生)으로 조성된 밀도(密度) 높은 다층(多層) 이령임형(異令林型)이 특정이다. 3. 단목택벌작업(單木擇伐作業)과 군장산벌작업(群狀傘伐作業)이 작업종(作業種)으로 흔히 적용(適用)되나 부분적(部分的)으로 산벌작업(傘伐作業)과 소면적(小面積) 개벌작업(皆伐作業)이 일부지역(一部地域)에서 실시(實施)되고 있다. Baden식(式) 획벌작업(劃伐作業)과 Bayern식(式) 획벌작업(劃伐作業)이 Schwarzwarld의 갱신(更新)에 널리 쓰이지만 택벌(擇伐) 작업(作業)도 부분적(部分的)으로 적용(適用)되고 있다. 4. 임목(林木)의 벌채(伐採)는 보속적(保續的)인 생산(生産)과 생태계(生態系)의 보전(保全)을 위(爲)해서 Europe의 산림경영(山林經營)에서는 년생장량(年生長量)을 넘지 않도록 적절(適切)히 제한(制限)되고 있다. 산림경영(山林經營)에 있어서 국토보존(國土保存)과 휴양기능(休養機能)은 목재생산(木材生産)의 증진(增進)과 함께 더욱 중요시(重要視) 되어지고 있다. 5. 미국산(美國産) Douglas-fir, red oak, 소나무류(類)와 일본낙엽송(日本落葉松), 이태리포푸라등(等)과 같은 외래수종(外來樹種)의 조림(造林)이 시도(試圖)되고 있으나 병충해(病蟲害), 기상해(氣象害)의 우려 때문에 신중한 주의(注意)가 기우려지고 있다. 6. 이들 국가(國家)에서는 수형목선발(秀型木選拔), 채종림선정(採種林選定), 산지시험(産地試驗), 차대검정(次代檢定), clone complexing을 위(爲)한 잡종채종원(雜種採種園)과 같은 임목개량(林木改良)에 관(關)한 몇가지 집중적(集中的)인 연구(硏究)가 수행(修行)되고 있으며 Sweden과 Netherland에서는 조림(造林)에 소요(所要)되는 종자(種子)의 상당양이 조성(造成)된 채종원(採種園)으로부터 공급(供給)되어지고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.444-450
• /
• 2011

The goal of this study is to investigate bending properties of domestic timber. Three representative structural timber from Larix kaempferi, Pinus koraiensis, and Pinus densiflora, in the northeastern South Korea were selected. Visual grading for the timber was conducted based on KFRI notification 2009-01 and the bending strength for the timber was evaluated based on ASTM D 198 bending. The high percentage of grade 1 and 2 for Larix kaempferi shows that the KFRI notification was optimized for this species. The bending strength distributions from Pinus koraiensis and Pinus densiflora were very similar. It could be possible to specify the allowable bending properties of these two Specification using a united species group similar to spruce-pine-fir. Lastly, the bending strength of $120{\times}180mm$ structural members was higher than both existing values in KBC 2009 and design values for timber of imported species described in the NDS. Thus, 120 mm thick domestic softwoods could replace the commercial imported species and the KBC should be modified to provide design values for both timber and dimensional lumber, respectively, like NDS.

• Journal of the Korean Wood Science and Technology
• /
• 제51권3호
• /
• pp.197-206
• /
• 2023

A truss is a structure in which the members are connected and arranged such that they are primarily subjected to axial loading. A truss has the advantage that it can be used for a longer span because the structure distributes the applied force to its members well, and the load is transmitted only in the axial direction of the members. Trusses manufactured using timber have more advantages than those made of other materials. In this study, the properties of parallel chord trusses composed of timber chord and steel-web members were evaluated. We constructed truss specimens with various lengths by using upper and lower chords of 2 × 4 inch spruce-pine-fir lumber and steel-web members manufactured by S and P companies. The specimens were tested in accordance with KS F 2150. The test results showed that the load at the deflection limit and the deflection limit itself increased from L/180 to L/360 regardless of the length of the specimens. For specimens of the same length, the load at the deflection limit increased as the height of the parallel timber chord truss specimens increased from 200 to 300 mm. Successive installations of the steel-web members (SST) showed almost 2 times the load at each deflection limit compared to that of SAT specimens (alternate installation of the steel-web members). When comparing the three load-deflection limits in terms of the manufacturer of the steel-web members, the load at each deflection limit for SST specimens was higher than that for PST specimens.