• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.110-123
• /
• 2024

Onyanghaenggung Palace(temporary palace at Onyang) is an important cultural heritage that can substantially confirm the king's visiting at hot springs based on literature records such as <Ongungyeonggoedae(溫宮靈槐臺)>, <Oncheonhaenggungdo(溫泉行宮圖)> of 『Ongungsasil(溫宮事實)』, <Younggoedaedo(靈槐臺圖)>, 『Younggoedaegi(靈槐臺記)』 and cultural properties such as Yeonggoedae(靈槐臺) and Shinjeong Monument(神井碑). Through a photo taken by Hermann Sander in 1906, it can be confirmed that the hot springs(Tangsil building) at Onyanghaenggung Palace during the Joseon Dynasty was maintained until the early Japanese colonial period. The purpose of this study is to estimate the compositions of the hot springs(Tangsil building) in Onyanghaenggung Palace based on literature records and <Oncheonhaenggungdo>(1795). To achieve these purposes, we firstly examined the changes in Onyanghaenggung Palace and the hot springs (Tangsil building); secondly, the bathing behaviors of kings were reviewed; thirdly, we organized the architectural composition of the hot springs (Tangsil building) according to "Ongung Repair" of 『Ongungsasil (溫宮事實)』; and fourthly, by comparing Sander's photo in the early days of Japanese colonial rule, the architectural composition of the hot springs (Tangsil building) in the late Joseon Dynasty was examined. The results of this study are as follows. First, the hot springs(Tangsil building) of Onyanghaenggung Palace were continuously connected to the Onjeongsil(溫井室) in the reign of King Hyeonjong and maintained until 『Hoseo-eupji』 (1871) in the late Joseon Dynasty. It matches the photograph taken by Hermann Sander(1906) and <1912 Onyang Hot Springs in Asan City>(1912) of Korea Copyright Commission during the early Japanese colonial period. Second, the various king's bathing methods during the Joseon Dynasty were adopted such as washing, spilling and bathing head while sitting on a bathing platform or chair, or exposing the steam of hot spring water, dipping feet into the water and a half-body soaking bath below the navel immersed in water. Third, the stone bathtubs of hot springs(Tangsil building) are composed of the upper bath which was hot spring water gushes out from the northwest, bends to the east, enters the middle bath, and bends to the south to come out to the outside to gather in the lower bath. Around the stone bathtubs, pebble stones brought in from Taean were laid on the floor of the hot springs(Tangsil building). From the above considerations, the compositions of the Tangsil building in Onyang Temporary Palace is based on the king's approach from the main royal building, the king's bathing method and bathing tools, the bathing behavior of enlisted medical officers and bathing assistants, and each rooms mentioned in "Ongung Repair". By comparing it with Hermann Sander's photo, the architectural compositions of the hot springs(Tangsil building) can be estimated.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.75-83
• /
• 1970

66 samples of underground waters at the town Onyang were collected and analyzed from August 19 to November 5, 1969. Fluorine more than 1.0 mg/l is contained in the under ground waters in the region 0.9 km away from the Onyang hot springs, fluorine more than 0.3 mg/l in the waters in the region 1.2 km away from the hot springs, and 0.04-0.29 mg/l fluorine in the waters in the region from 1.2 km to 3.9 km away from the hot springs. It is advisable that the residents in their teeth growing ages must not drink the underground waters in the region 1.2 km away from the hot springs because the waters cause dental trouble (mottled teeth) and they may drink the waters in the region from 1.2 km to 3.9 km away from the hot springs for the fluoridation of their teeth. It is reasonable to suppose that the high fluorine contents of the underground waters are caused mainly by the contamination of the hot spring waters in which fluorine and calcium in rock are dissolved, in the region 1.2 km away from the hot springs, and that the waters in the region from 1.2 km to 3.9 km away from the hot springs contain much fluorine produced by the decomposition of organic substances.

• Smart Structures and Systems
• /
• v.15 no.6
• /
• pp.1521-1542
• /
• 2015

The use of shape memory alloys (SMAs) in dynamical systems has an increasing importance in engineering especially due to their capacity to provide vibration reductions. In this regard, experimental tests are essential in order to show all potentialities of this kind of systems. In this work, SMA springs are incorporated in a dynamical system that consists of a one degree of freedom oscillator connected to a linear spring and a mass, which is also connected to the SMA spring. Two types of springs are investigated defining two distinct systems: a pseudoelastic and a shape memory system. The characterisation of the springs is evaluated by considering differential calorimetry scanning tests and also force-displacement tests at different temperatures. Free and forced vibration experiments are made in order to investigate the dynamical behaviour of the systems. For both systems, it is observed the capability of changing the equilibrium position due to phase transformations leading to hysteretic behaviour, or due to temperature changes which also induce phase transformations and therefore, change in stiffness. Both situations are investigated by promoting temperature changes and also pre-tension of the springs. This article shows several experimental tests that allow one to obtain a general comprehension of the dynamical behaviour of SMA systems. Results show the general thermo-mechanical behaviour of SMA dynamical systems and the obtained conclusions can be applied in distinct situations as in rotor-bearing systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.97-104
• /
• 2007

Vibration analysis of a rigid body supported by in-parallel linear springs can be greatly simplified by utilizing the conditions for a plane of symmetry. The vibration modes of an oscillatory system having plane of symmetry are classified into the in-plane and out-of-plane modes. From the viewpoint of screw theory, they represent respectively the vibration axes perpendicular to the plane of symmetry and lying in the plane of symmetry. In this paper, the sets of orthogonal and mutually intersecting three springs are used as resilient support of a rigid body. The geometrical conditions for the system to have a plane of symmetry and diagonalized stiffness matrix are presented. From the orthogonality of the vibration modes with respect to the inertia matrix, the geometrical relation between the reaction wrenches and the vibration modes are derived. This geometrical relation is then used to get the cubic design equation for the design of out-of-plane modes. The numerical design example of engine mounts is presented in order to explain the suggested design technique.

• Geomechanics and Engineering
• /
• v.23 no.5
• /
• pp.405-418
• /
• 2020

Deep excavation may have impact on the adjacent tunnels. It is obvious that the excavation will adversely affect and even damage the existing tunnels if the induced deformation exceeds the capacity of tunnel structures. It hence creates a high necessity to predict tunnel displacement induced by nearby excavation to ensure the safety of tunnel. In this paper, a simplified method to evaluate the heave of the underlying tunnel induced by adjacent excavation is presented and verified by field measurement results. In the proposed model, the tunnel is represented by a series of short beams connected by tensile springs, compressional springs and shear springs, so that the rotational effect and shearing effect of the joints between lining rings can be captured. The proposed method is compared with the previous modelling methods (e.g., Euler-Bernoulli beam, a series of short beams connected only by shear springs) based on a field measured longitudinal deformation of subway tunnels. Results of these case studies show a reasonable agreement between the predictions and observations.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1988.10a
• /
• pp.24-29
• /
• 1988

In this paper, it is proposed hew the rigid element method suggested in the first paper can be applied to the elastic and elasto-plastic analysis of spherical shell with the open stiff ring. In the analytical model, the solution domain is divided into rectangular-shaped spherical bending elements. Each contact surface of two adjacent elements is interconnected with four elastic springs, and it is assumed that the internal forces are distritributed into springs. The 6 degrees of freedom of the element are placed in the center of elements, and the 6 cen-teroidal rigid displacements affect other elements through springs around elements. And then the solution domain is estimated by the behavior of elements and springs. In this study, these concepts are applied to the elastic and elasto-plastic analysis for the eight cases of the spherical shell according to the condition of stiff ring, the condion of loading and the size of opening. And then some numerical results such as the distribution of stresses, the force-displacement curves and the mode of fractures will he shown.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.612-614
• /
• 1997

Silicon based micro mirror array is a highly efficient component for use in optical applications such as adaptive optical systems and optical correlators. A micro mirror array designed, fabricated and tested here is consisted of $5{\times}5$ single layer polysilicon, electrostatically driven actuators. In this paper, deflection characteristics and pull-in behavior of the actuators for analog control was studied and particularly, the influence of the residual stress in flexure beams for the restorative force of actuators was considered. The springs are modeled as a residual stress-free spring and a spring with residual stress. In calculation, a mirror with the residual stress-free springs has 30.3N/m spring constant and 31.1V pull-in voltage. On the other hand, a mirror with the stressed springs has 23.6N/m and 27.4V respectively. The experimental result, which is 20.5N/m and 25.5V, shows that the stressed springs ore well modeled.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.389-392
• /
• 2006

In this letter, a laterally-driven bistable electromagnetic microrelay is designed, fabricated, and tested. The proposed microrelay consists of a pair of arch-shaped leaf springs, a shuttle, and a contact bar made from silicon, low temperature oxide (LTO), and gold composite materials. Silicon-on-insulator wafers are used for electrical isolation and releasing of the moving microstructures. The high-aspect-ratio microstructures are fabricated using a deep reactive ion etching (DRIE) process. The tandem-typed leaf springs with a silicon/gold composite layer enhance the mechanical performances while reducing the electrical resistance. A permanent magnet is attached at the bottom of the silicon substrate, resulting in the generation of an external magnetic field in the direction vertical to the surface of the silicon substrate. The leaf springs show bistable characteristics. The resistance of the pair of leaf springs was $7.5\;{\Omega}$, and the contact resistance was $7.7\;{\Omega}$. The relay was operated at ${\pm}0.12\;V$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.74-81
• /
• 1996

The wave washer springs are widely used in non-return valves of fluid, especially in air check valves to confirm the rapid shut-off of valve propers. The stiffness of wave washer springs used in suction and exhaust valves of reciprocating air compressor play an important role on efficiency of the compressor. If the stiffness of the spring is too high, the pressure differences necessary to open the valves become high and the volumetric efficiency of cylinder decreasse. If the stiffness of the spring too low, the valve can not be closed rapidly and the inverse flow of air can take place. So, the optimum stiffness of valve spring is very important and it will be very helpful that the stiffness of wave washer springs to be used in suction and exhaust valves can be calculated in design stage of air compressor. In this paper the formula for calculating the spring constant of wave washer spring is introduced using bending and torsion theory of frames. The experiments are also carried out to measure the spring constants of several samples. It is proven that the calculated spring constants of wave washer springs are coincided well with measured values and that the formula presented in this paper for calculating the spring constants of wave washer spring is very useful for design of valves used in reciprocating air compressor.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.57-65
• /
• 2016

The suspension system of a subway vehicle is composed of $1^{st}$ and $2^{nd}$ springs. The suspension system is the most important parameter in determining the vibration ride comfort. If the $1^{st}$ suspension spring is designed as a spring with strong stiffness to improve the running stability at high speed, it causes vehicle vibrations. In this paper, by testing and analyzing changes of the characteristics of Chevron springs, which have been the primary suspension springs used for about 20 years, we study how changing the characteristics affects vehicle acceleration and ride comfort. The lateral and longitudinal vibrational ride comfort index levels were lower than the vertical ones. Therefore, as increasing the stiffness of Chevron springs has the greatest effect on the vertical vibrational ride comfort index level, a countermeasure for vertical vibration reduction is needed when the stiffness increases owing to aging. Finally, maintenance guidelines, including the replacement time for the Chevron rubber, were proposed based on these findings.