• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1026-1034
• /
• 1988

본 연구에서는 실제적인 평형스프링을 비교적 단순한 계산에 의해 설계할 수 있는 방법의 하나로서, 선형스프링의 근사법을 제시하였으며, 이 근사법을 4절 기구의 입력토오크 특성의 향상문제에 적용하여 유용한 결과가 얻어짐을 보였다.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.163-180
• /
• 2019

A semi analytical method is employed to analyze free vibration characteristics of uniform and stepped functionally graded circular cylindrical shells under complex boundary conditions. The analytical model is established based on multi-segment partitioning strategy and first-order shear deformation theory. The displacement functions are handled by unified Jacobi polynomials and Fourier series. In order to obtain continuous conditions and satisfy complex boundary conditions, the penalty method about spring technique is adopted. The solutions about free vibration behavior of functionally graded circular cylindrical shells were obtained by approach of Rayleigh-Ritz. To confirm the dependability and validity of present approach, numerical verifications and convergence studies are conducted on functionally graded cylindrical shells under various influencing factors such as boundaries, spring parameters et al. The present method apparently has rapid convergence ability and excellent stability, and the results of the paper are closely agreed with those obtained by FEM and published literatures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.141-147
• /
• 2018

본 연구에서는 TS 내진보강공법의 내진보강 효과를 검증 할 목적으로 TS 댐퍼(Tension Spring-Damper)를 설치한 철근콘크리트 골조를 대상으로 한 반복 주기하중 재하 실험을 수행 하였다. 실험체는 기준 실험체인 무보강 골조 실험체와 3개의 보강 골조 실험체의 총 4개이며, 실험의 변수는 댐퍼 설치 여부, 댐퍼의 형상 및 시공방법이다. 그 결과 창호 내부 삽입 형식의 시공방법이 강도와 강성의 측면에서 2배가량, 외부 부착형식의 시공 방법이 에너지 소산의 측면에서 2배가량의 성능 향상을 나타내어 TS 내진보강공법이 현장 적용성과 내진보강 효과가 우수한 공법임을 확인 할 수 있었다.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.528-538
• /
• 2011

As a forming method for curved hull plates more efficient than the flame bending, mechanical bending using multi point press forming and die-less forming is discussed in this paper. the mechanical forming is a flexible manufacturing system for automatically forming of hull parts. It is especially suited to varied curved parts. This paper discusses a multiple point pressing machine composed of a pair of reconfigurable punches in order to achieve the rapid forming of curved hull plates using division forming and presents how forming information is obtained from the given design surface. Although the mechanical forming can be efficient in the metal forming, spring back after pressing is a phenomenon which must be carefully considered when quantifying the process variables. If the spring back is not accurately controlled, the fabricated shell plate cannot meet assembly tolerance. This paper describes the principles to calculate the proper stroke of each punch at the divided areas. the strokes are determined by an iterative process of sequential pressing and spring back compensation from an unfolded flat shape to its given design surface. FEA(finite element analysis) is used to simulate the spring back of the plate and the IDA(iterative displacement adjustment) method adjusts the offset of pressing punches from the deformation results and the design surface. The shape deviations of two surfaces due to spring back are compensated by integrated system using FEA and IDA method. For the practical application, It is aimed to develop an integrated system that can automatically perform the compensation process and calculate strokes of punches of the double sides' reconfigurable multiple-press machine and some experimental results obtained with mechanical bending are presented.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.234-234
• /
• 2017

Recent abnormal weather, especially continued rainfall during sowing season causes difficulty in proper sowing of wheat and delayed sowing after November 15 is concerned about freezing damage during winter, resulting in reduction of wheat yield. To correspond government policy of crop sufficiency improvement and produce and supply raw wheat and barley steadily, expansion of cultivation area is necessary and spring sowing of wheat is required. To obtain basic information on the improvement of spring sown wheat and barley production, comparison and path coefficients analysis was conducted for yield and yield related components from autumn and spring sown wheat and barley. Path analyses were known as very useful in clarifying the effects of yield components on grain yield formation, which were not accurately reflected in simple correlation anaylses. Most cultivated 5 wheat and 9 barley cultivars were sown on October and February at Cheon-ju province according to standard sowing method. For the spring sowing of wheat and barley, the varieties having vernalization degree I~III are seeded in the mid of February and seeding rate is 200~250kg/ha which is increased by 25% than autumn sowing. N-fertilizer of 95 kg/ha and the same amount of P, K dressed in autumn are applied at once as basal fertilizer. The magnitude of direct effect in each yield components on yield was in sequence as follows. In autumn wheat, grain number per $spike{\geq}$ the number of spike per $m^2$>1000-grain weight and in spring wheat, grain number per $ spike{\geq}the$ number of spike per $m^2$> 1000-grain weight. In autumn naked barley, 1000-grain weight> the number of spike per $m^2$, grain number per spike and in spring barely, the number of spike per $m^2$> grain number per spike > 1000-grain weight. In autumn covered barley, grain number per spike>the number of spike per $m^2$ and in spring coverd barley, the number of spike per $m^2$> grain number per spike, 1000-grain weight. In autumn malt barley, the number of spike per $m^2$>1000-grain weight and in spring malt barley, the direct effects of three yield components were similar. According to the path analysis of yield components for spring sown wheat and barley, it was suggested that adequate number of spike per $m^2$ was most important factor for yield increase.

• 한국환경보건학회지
• /
• 제45권3호
• /
• pp.238-246
• /
• 2019

Objective: The purpose of this study was to investigate the distribution of mineral components, health and taste index for water supply plants, spring water located in northern Gyeonggi area and bottled waters in market to analyze Ca, K, Mg Na, Si, $F^-$ and $SO_4{^{2-}}$. Method: The samples were source and tap water in 15 water supply plants over 9 river basin, 172 spring water and 20 bottled water. The Ca, K, Mg Na and Si were analyzed by ICP-OES. The $F^-$ and $SO_4{^{2-}}$ were determined by Ion Chromatograph. Then, taste and health index were calculated using Hashimoto equation. Results: The average concentration of major minerals showed in same order of Ca > Na > Mg > K for all kinds of drinking water from water supply plants, spring waters and bottled waters. Total concentration of major minerals (Ca, K, Mg, Na) was calculated that showed 26.79 mg/L of tap water, 21.81 mg/L of spring water, 32.94 mg/L of bottled water on average. So, the spring waters indicated the lowest minerals sum. The tap water from water supply plants was categorized to Group I, II for 33.3, 44.4% according to K-index and O-index. Otherwise, spring water was classified as Group I, II for 44.0, 46.3%. Conclusion: According to the results of K and O-index, water from water supply plant showed higher K-index which means good for the health. Otherwise, spring water indicated higher O-index that people can feel more delicious than tap water. Futhermore, the mineral distribution of source water from water supply plants and spring water had indicated high correlation with geological effect.

• 한국잠사곤충학회지
• /
• 제13권2호
• /
• pp.145-150
• /
• 1971

년간 다회육에 적합한 사육시기를 알고자, 1968∼1970년에 걸쳐 잠업시험장(수원)외에 충남(공주), 경북(상주) 및 전남잠종장(장성)과 연락시험으로 실시한 연중 11기 사육시험 결과에서 1. 잠작의 일반적 경향은 춘잠은 소잠이 빠를수록 양호하였으며 추기에는 초추잠(6기)이 가장 불량하였고 추잠은 관행 소잠시기를 정점으로 하여 그 시기로부터 빠르거나 늦어질수록 점차로 불량하나 빠를수록 급격하게 불량하다. 2. 우리나라의 잠기별 잠작은 춘(1∼4기), 추(7∼10기), 만추(11기), 하(5기), 초추잠(6기)순으로 불량하였다. 만추잠 소잠시기는 남부지방이 중부지방보다 6∼7일 정도 늦을 수 있다. 3. 잠작면을 주로한 다회육의 소잠적기는 4회보통육은 춘기2회, 추기2회로 하되 춘기는 당해 지방 관행 춘잠기를 중심으로 3∼4일 정도 앞당기거나 5일정도 늦춘 2회육(1, 3기) 추기는 2∼5일 앞당기고, 3∼6일 늦춘 2회육(8, 10기)이 유리하다. 4회조상육은 춘기 2회(1, 3기)는 전기 보통육에서와 같고 추기2회육에서는 당해지방의 관행 추잠(9기)과 만추잠(11기)으로 하는 것이 유리하다.

• 오토저널
• /
• 제8권3호
• /
• pp.77-87
• /
• 1986

The fatigue characteristic study of a Pony Coil spring is performed by considering the tropical service conditions in the range of 50.deg. C through 150.deg. C. The experiment results of the static and dynamic characteristics of the test pieces agreed with the result of the strain analysis by wittricke's method. The strain energy value is increased as temperature rises. An increase is 1.58% at 100.deg. C and 2.26% at 150.deg. C after fatigue tests. The elastic strain is also decreased as temperature rises.

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.121-128
• /
• 1999

The SHO PATCH System Mortar is a mortar shotcreting system which uses fairly small machine and equipment, and is applied for shotcrete tunnel linings, in particular for small bore tunnels of aqueducts by the TBM(Tunnel Boring Machine) method, and for reparing tunnels suffering from spring water and deterioration. This study shows the characteristics of the new mortar shotcreting system, the SHOT PATCh System Mortar, which exhibits excellent shotcrete performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.128-132
• /
• 1997

This paper deals with the optimization of pipe-support allocation using the genetic algorithm, and shows the feasibility of the optimization method to actual design problems and also the convergence characteristics of optimization calculation with respect to the various seismic waves. The piping system was modeled as mass-spring system with 5 degrees of freedom and the support was as spring-damper. The support allocation problem was formulated to minimize the response of the piping system to seismic excitation.