• Title/Summary/Keyword: spreading ratio

Search Result 206, Processing Time 0.027 seconds

Estimation of vertical and horizontal spreading force of the towing cage for transporting the live fish by model test and simulation (모형실험과 시뮬레이션을 통한 활어 이송용 예인 가두리의 수직 및 수평 전개력 추정)

  • Park, Subong;Lee, Chun Woo
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.50 no.2
    • /
    • pp.176-184
    • /
    • 2014
  • Nowadays, consumption of fisheries products is increasing. There are several factors, one of which is a quantitative development through aquaculture. Another factor is an increase qualitative consumption of fish which require that fish be supplied alive. This requires a lot of technical effort to transport the live fish that have low survival rate (c.f. tuna and mackerel) in coastal waters and in the open sea. To develop a towing cage for transporting the live fish, model test in a circulate water channel and simulation by computer tool were carried out. In order to spread vertically, floats were attached at the upper part of the cage, and iron chains attached at the lower part of the cage. For horizontal spreading, kites were attached on the cage. The tension and spreading performance of the cage were measured. The result shows that the tension and reduction ratio of inside volume of the cage were tended to increase with increased towing speeds. The suitable operation condition in towing cage was 1.0 m/s towing speeds with vertical spreading force 8.7 kN, horizontal spreading force 5.6 kN; in this case the reduction ratio of inside volume of the cage was estimated as 25%.

The Application to Sand Spreading Method for Accelerating Sedimentation and Self-Weight Consolidation of Dredged Soils (준설토의 침강.자중압밀촉진을 위한 모래살포공법의 적용성에 관한 연구)

  • 양상호;김재권;심성현;김수삼
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2003.03a
    • /
    • pp.767-772
    • /
    • 2003
  • The clay which transported into a pond under the high water content condition have no effective stress which develop from the starting point of sedimentation and self-weight consolidation. Since sedimentation and self-weight consolidation dependent on self-weight of solids is made progress over a long time, to accelerating it have many advantages in the economic view In this paper, sand spreading method which is one of sedimentation and self-weight consolidation acceleration method is studied through a series of experiments considering the mixing ratio of sand and clay. The test results show that the mixing ratio of clay and sand of 1:0.2 is the biggest rate of consolidation and the pouring at the end point of sedimentation considerably effects on consolidation rate.

  • PDF

PAPR Evaluation and Analysis of Candidate Waveforms Using DFT Spreading for 5G Mobile Communications (DFT Spreading을 사용한 5세대 이동통신 후보 변조기술의 PAPR 평가 및 분석)

  • An, Changyoung;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.12
    • /
    • pp.1091-1099
    • /
    • 2015
  • UFMC(Universal-Filtered Multi-carrier) and FBMC(Filter Bank Multi-carrier) system are receiving attention as candidate waveforms for 5G mobile communication system. But, these systems have high PAPR(Peak to Average Power Ratio) problem because these systems use a number of subcarrier. In this paper, we propose DFT(Discrete Fourier Transform) spreading based DFT-s(spreading)-UFMC system and DFT-s-FBMC system in order to overcome the PAPR drawback. In order to evaluate PAPR performance of the proposed systems, we design and simulate OFDM(Orthogonal Frequency Division Multiplexing), UFMC, FBMC, DFT-s-OFDM, DFT-s-UFMC, DFT-s-FBMC system. As simulation results, each PAPR performance of DFT-s-OFDM system, DFT-s-UFMC system, and DFT-s-FBMC system rise by 2.7 dB, 2.8 dB, and 1.1 dB respectively by DFT spreading technique.

BER Performance Comparison and Evaluation of 5G Candidate Waveforms Based on DFT Spreading under the Nonlinear HPA (비선형 HPA 환경에서 DFT Spreading 기반 5세대 후보변조기술의 BER 성능 비교와 평가)

  • An, Changyoung;Ryu, Heung-Gyoon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.41 no.4
    • /
    • pp.415-423
    • /
    • 2016
  • High PAPR (Peak-to-Average Power Ratio) characteristic causes some problems like system performance degradation and OOB (Out-of-Band) power increasement under the HPA (High Power Amplifier) nonlinearity condition. UFMC (Universal Filtered Multi-Carrier) and FBMC (Filter Bank Multi-Carrier) are regarded as 5G(Generation) candidate waveforms. In this paper, we evaluate and analyze performance of these systems with DFT-s (Discrete Fourier Transform Spreading) technique under the nonlinear HPA environment. In this paper, we describe OFDM (Orthogonal Frequency Division Multiplexing), UFMC, FBMC, DFT-s-OFDM, DFT-s-UFMC, and DFT-s-FBMC system, and evaluate BER (Bit Error Rate) performance of these systems. As simulation results, BER performance degradation by HPA nonlinearity of DFT-s-OFDM and DFT-s-UFMC is greatly overcome by DFT spreading technique. However, BER performance degradation by HPA nonlinearity of DFT-s-FBMC system is little overcome.

Subcarrier Block Power Control for Adaptive Downlink OFDM with Frequency Spreading and Equalization (주파수 확산과 등화기법을 적용한 적응 OFDM에 대한 부 반송파 블록 전력 제어)

  • Kim Nam-So;Cho Sung-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.3A
    • /
    • pp.214-220
    • /
    • 2006
  • In this paper, we propose the transmit power controlled adaptive modulated OFDM with frequency symbol spreading and equalization(TPC-AMS/FSS-OFDM) system. In the transmitter of the TPC-AMS/FSS-OFDM, each SP transformed signal is spread by orthogonal spreading codes and combined, so the detected signals obtain the same SINR(signal interference to noise ration) for each frequency symbol spreading block. In this case, we can assign the same modulation level and transmit power for each frequency symbol spreading block. Thus, the proposed system provides the increased throughput performance with reducing the total transmit power, FBI and MLI.

A Study on the Strength of Brazed Joint for Automotive EGR Cooler by Heat Treatment Conditions (열처리조건에 의한 자동차용 EGR쿨러의 브레이징부 접합강도에 관한 연구)

  • Lee, Joon;Han, Chang-Suk
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.22 no.4
    • /
    • pp.210-216
    • /
    • 2009
  • Stainless steel EGR cooler of diesel engine is widely used to prevent the corrosion due to the content of sulfur in diesel fuel. The strength of brazed joint between stainless steel materials is very important. It is essential to observe the spreading ratio of the filler metals under the condition of deoxidation or vacuum during heating process. In this experiment, spreading ratio was tested to find the optimum brazing condition for stainless steel using brazing filler metals of FP-613, BNi-2 and BNi-5 on sus304 and sus410. Anti-corrosion tests were also performed on the above filler metals with solution of 5% $H_2SO_4$, 65% $HNO_3$ and 5% $NH_4OH$. Consequently FP-613 has good ability for anti-corrosion with 30% of chromium content compared with other filler metals. The optimum brazing conditions are occurred at $960^{\circ}C$ for 90 min. and at $1090^{\circ}C$ for 50 min. at the same degree of vacuum, $2{\sim}3{\times}10^{-3}$ Torr.

Sub-band Spreading Technique for Adaptive Modulation in OFDM Systems

  • Jung, Bang-Chul;Kwon, Jae-Kyun;Jin, Hu;Sung, Dan-Keun
    • Journal of Communications and Networks
    • /
    • v.10 no.1
    • /
    • pp.71-78
    • /
    • 2008
  • We propose a sub-band spreading technique for adaptive modulation (AM) in orthogonal frequency division multiplexing (OFDM) systems in order to reduce signaling overheads and to average frequency selective fading channels causing different signal-to-noise ratio (SNR) values for subcarriers in each subband. The conventional sub-band based AM schemes can also reduce signaling overheads and complexity for allocating a resource per sub-band at a time. However, they may suffer from the channel variation in a sub-band when the sub-band size is larger than the channel coherence bandwidth (BW). The sub-band spreading at the transmitter enables the received symbols in each sub-band to have an identical reliability even in a frequency selective fading channel. We rigorously analyze the averaged SNR value at the receiver of the sub-band spreading system and the analyzed average SNR in a sub-band is used for an adaptation criterion. The proposed AM scheme outperforms the conventional sub-band based OFDM scheme without spreading, and it can yield better throughput performance than the conventional subcarrier based AM schemes when we consider the signaling overheads.

Plywood Properties by PEG Treatment Conditions on Veneer (단판(單板)의 PEG 처리조건(處理條件)에 따른 합판(合板)의 성질(性質))

  • Suh, Jin-Suk;Doh, Geum-Hyun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.17 no.2
    • /
    • pp.20-25
    • /
    • 1989
  • This study was carried out in order to investigate the treatment effect of PEG soln which is a common dimensional stabilizer to green log. sawing panel etc, on bonding product including plywood widely-used in secondary processing unit. The 30% concentration of aqueous PEG soln. with molecular weight of 400, 1.000 and 4,000 were prepared respectively, and also dipping the veneer in the PEG soln. spreading the PEG soln. on veneer and mixing the PEG soln. in the adhesive were allowed. Then the ratio of PEG impregnation on veneer, the adhesive strength of plywood were epitomized as follows: The ratio of impregnation by PEG 4,000 at dipping condition was highest. while that by PEG 400 at same condition was lowest. However, the effect of PEG molecular weight on the ratio of impregnation at spreading condition did not occur. 2. The adhesive strength was great in the order of 4,000>400>1,000 in molecular weight of PEG at dipping and spreading conditions. In case of mixing the PEG soln. in the adhesive, the adhesive strength was great in the order of 400>1,000>4,000 in molecular weight of PEG. Throughout three treatment conditions, PEG 400 was relatively favourable with about 10kg/$cm^2$ dry strength. 3. The adhesive strength was great 10 the order of spreading >dipping >mixing condition. 4. Although adhesive strength with the 30% concentration of aqueous PEG soln. was decreased by 35% and over, compared to control (non-treatment) adhesive strength, all types of PEG treatment except mixing the PEG soln. in the adhesive exceeded the standard dry strength for common use panel. 7.5kg/$cm^2$. 5. In warm water-proof test, the adhesive strengths by all PEG treatment conditions were less than the standard wet strength, 7.5kg cot, and also delamination of glue line occured mostly in mixing in the PEG soln. in the adhesive condition.

  • PDF

A Performance Analysis of CDMA System Based on the Combination of Bandwidth Expansion (CDMA 시스템의 대역폭확장 조합에 따른 성능분석)

  • Ryu, Kil-Hyen
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.11
    • /
    • pp.14-18
    • /
    • 2010
  • We propose a performance analysis of code division multiple access systems based on the combination of M-ary and pseudo-noise spreading. In spite of the total bandwidth expansion being equal, there is a difference in the system performance by the combination of M-ary and pseudo-noise spreading. The proposed analysis uses each bandwidth expansion, caused by M-ary and pseudo-noise spreading, rather than the total bandwidth expansion. If the signal to interference plus noise ratio becomes high, it is more effective to reduce biterror rate by bandwidth expansion of M-ary modulation rather than that of pseudo-noise spreading. Since the proposed analysis reflects the effect of the M-ary modulation, the bit error rate from the proposed analysis is closer to the results of the simulation than from the conventional analysis.

NUMERICAL ANALYSIS OF THE IMPACTING AND SPREADING DYNAMICS OF THE ELLIPSOIDAL DROP ON THE PERFECT NON-WETTING SOLID SURFACE (완전 비습윤 고체 표면 위 타원형 액적의 충돌 및 퍼짐 거동에 대한 수치적 연구)

  • Yun, S.
    • Journal of computational fluids engineering
    • /
    • v.21 no.4
    • /
    • pp.90-95
    • /
    • 2016
  • Leidenfrost drops with ellipsoidal shaping can control the bouncing height by adjusting the aspect ratio(AR) of the shape at the moment of impact. In this work, we focus on the effect of the AR and the impact Weber number(We) on the non-axisymmetrical spreading dynamics of the drop, which plays an important role in the control of bouncing. To understand the impact dynamics, the numerical simulation is conducted for the ellipsoidal drop impact upon the perfect non-wetting solid surface by using volume of fluid method, which shows the characteristics of the spreading behavior in each principal axis. As the AR increases, the drop has a high degree of the alignment into one principal axis, which leads to the consequent suppression of bouncing height with shape oscillation. As the We increases, the maximum spreading diameters in the principal axes both increase whereas the contact time on the solid surface rarely depends on the impact velocity at the same AR. The comprehensive understanding of the ellipsoidal drop impact upon non-wetting surface will provide the way to control of drop deposition in applications, such as surface cleaning and spray cooling.