• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.469-474
• /
• 2001

Milling the rice with low moisture requires more energy, produces more cracked rice, and results in reducing taste of cooked rice. Accordingly, it is necessary to add moisture to the rice with low moisture to obtain optimum moisture level for milling and taste of rice. This study was performed to evaluate the influence of initial moisture content and absorption rate on rice crack, milling energy and whiteness of milled rice and to obtain the information for design of rewetting system mounted on stirring device in grain bin. The tests were conducted for the four levels of initial moisture content in the range of 11.4 to 14.5%(w.b.) and six levels of absorption rate in the range of 0.04 to 1.0%, w.b./hr. In the case of lower moisture content below 12%(w.b.), crack ratios of brown rice were remarkably high regardless of initial moisture contents. Therefore, it was found that rough rice below 12%(w.b.) in initial moisture content could not rewetted by spraying water without crack generation of low level. Absorption rate must be below 0.3%, w.b./hr to maintain crack ratio increase of less than 1% regardless of initial moisture contents. In the case of allowable crack ratio increase of 2% and 5%, it was found that the maximum absorprion rate was respectively 0.6%, w.b./hr and 1.0%, w.b./hr in the initial moisture content of above 13.5%(w.b.). Rewetting the rough rice in moisture content of 11.4 to 14.5%(w.b.) to 14.3 to 16.9%(w.b.) decreased milling energy consumption by 15.9 to 22.3%. The effect of energy saving was higher in the samples of higher initial moisture content. Whiteness of milled rice was decreased by 0.5 to 1.5.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.79-87
• /
• 2024

This paper is a study on the optimal microdroplet generation conditions in indirect charging electrostatic spraying. Unlike the direct charging method, which applies power to the nozzle, the indirect charging method applies power to the discharge electrode between the nozzle and the collection electrode. Therefore, an electrically simplified system can be obtained by minimizing the insulation part a stable spray pattern can be obtained with a wide spray angle, and a stable spray pattern can be obtained with a wide spray angle. To conduct the study, an indirect charging type electrostatic spray visualization system was constructed and the static characteristics of the microdroplets were analyzed through image processing of the spray shape of the microdroplets. The total number of microdroplets and the number of microdroplets per power consumption are confirmed according to the changes in the distance between the discharge electrode and the collection electrode, the flow rate, and the applied voltage, which affect the generation of microdroplets, and using this, the optimal generation conditions are derived and the corresponding microdroplet size distribution was analyzed. As a result of the experiment, it was confirmed that the optimal generation condition was at a flow rate of 15 to 20 mL/min and a voltage of -22.5 to -25 kV in terms of the number of microdroplets, and at a flow rate of 15 to 20 mL/min and a voltage of -20 kV in terms of energy consumption efficiency.

• Korean Journal of Organic Agriculture
• /
• v.26 no.3
• /
• pp.439-452
• /
• 2018

This study was carried out to establish of environment-friendly control system and to survey the occurrence status of Ricania shanthungensis in Jeonnam province from 2016 to 2017. R. shanthungensis occurred at 1,344 ha in 61 towns of 15 cities in Gwangju and Jeonnam province. At four sites in the stationary area, the densities of eggmass and pupae were lower in 2017 than in 2016, the hatching rate decreased, and the first hatching time, emergence of adults, and the start of spawning tended to be slower. Telenomus sp., an egg parasitoid of R. shanthungensis, was found in most areas. Sunchon had the highest rate of 46.1%, followed by Muan 40.6, Goksung 29.2, Gurye 25.8, and Gwangju 17, respectively. The optimum spraying time for the control of R. shanthungensis was early March. The spraying material and the dilution multiples are 10 times of the machine oil at environmental friendly cultivation and 500 times of the chlorpriphosphate wp. at normal cultivation. When sprayed these materials, 95% of egg prohibited to hatch. There was more than 80% of the insecticidal effects on the organic materials of the machine oil emulsion, the Sophora root extrect + microbial extract agent, and the castor emulsion. For adults, Sophora root extrect + microbial extract, neem extract, and machine oil were better. Four kinds of chemical pesticides such as dinotefuran wp were effective for nymph and adult control. We have developed an adult catching device using the most preferred daylight color and behavioral habits of R. shanthungensis. The capture device consisted of two daylight compact lamps (30W and 20W), a yellow plate, and a catcher using water, and caught about 700 individuals a day. Based on the above results, we have established a system for controlling and life cycle of R. shanthungensis in Jeonnam province.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.28-36
• /
• 2000

This study describes to analyze the characteristics for separation and recovery of both the dried particles and the purified solvent from the waste solvent through the vaporization process by the continuous and instantaneous vacuum drying system. The vacuum drying system for the waste solvents recovery consists of a feeding pump, a double pipe heat exchanger, a vacuum spray chamber, and a condenser. The vacuum drying system heats the waste solvent to the vapor in the double pipe heat exchanger and the expanded vapor is sprayed at the end of the tube. The vaporized solvent in the condenser are recovered. The particles in the waste solvent are separated and dried from the vapor in the vacuum spray chamber. Performance evaluation of the vacuum drying system was conducted using the mixture of the dried pigment particles and benzene or alkylbenzene as test samples. For the mixture of 10 wt% pigment particles an 90% benzene, the recovery efficiency of benzene was 88% with the purity of 99% and the recovery efficiency of dried particles was 94% with the moisture of 1.1 wt%. The size of pigment particles was decreased from $6.5\mu\textrm{m}$ to $5.6\mu\textrm{m}$ in diameter due to high speed spraying and dispersion in the vacuum drying system during drying process. Therefore, the vacuum drying system showed to be an effective method for separating particles and solvent in the waste solvent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.506-512
• /
• 2018

The fine dust generated in the home and restaurant business occupies a low ratio of about 4% of the total fine dust emissions. However, at the foodservice business, the rate of change of the pollutant concentration is very high, so that the temporary fine dust concentration can be measured up to 60 times. The pollutants generated from non-industrial combustion plants consist of particulate fine dust and gaseous organic compounds. To remove these pollutants, cleaning dust collection system, which is an effective system for simultaneous removal of gaseous and particulate matter, is applied. This is a method of increasing the probability of diffusion capture of the Brownian motion by pressurized liquid injection method using the atomizing nozzle. The dust removal efficiency of the fine dust collecting system was analyzed by nozzle spraying air pressure condition and angle using the manufactured fine dust removing system. As a result, it was confirmed that the efficiency of removal of fine dust and gaseous organic compounds was more than 90%. The developed system is expected to be highly usable in the future because it can remove particulate dust from the existing plant hood system without any installation cost.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2017

A survey was conducted to research on planting system and pesticide spray methods including spray volume, sprayer types, and spray nozzles used in apple orchards. The survey was deployed to 395 farmers in 17 cities and towns including 7 regions which are major producers of apple via interview. Major apple varieties were Fuji (79.2%) and Hongro (50.9%) and high density planting system was mainly used in apple orchards (distance between rows: 4.0-4.5 m (73.1%); planting distance: 1.5-3.5 m (88.6%); canopy height: 3.0-4.5 m (88.2%)). The percentages of sprayer types were 77.6% and 22.1% for speed sprayer (airblast sprayer) and power sprayer, respectively. Spray volumes per 10a were 250-300 L in April, the month of spraying the lowest volume, and 300-400 L in June-August, the months of spraying the highest volume. Significant difference in spray volumes were not observed between conventional planting and high density planting, but regional spray volume showed significant difference. The main nozzles used by apple farmers using power sprayers were super jet nozzle (45%), super wide nozzle (26%), and 2-3 vertical head nozzle (25%). The results will helpful to establish practical agrochemicals management policy including suggestion of pesticide spray volume and evaluation of pesticide residue data and efficacy data.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.303-308
• /
• 2013

A remote controlled sprayer has designed, manufactured and experimented to spray well on pear trees with pesticides. This study was executed to automate pest management of pear trees. Types of spray nozzle, which was used on the system, were analyzed experimentally to find an optimal spray equipment configuration with several nozzles. Attributions of ultrasonic sensors were analyzed to adjust spraying distance of an unmanned sprayer system. This paper investigated shapes of pear trees and cultivating environment of pear orchard. In order to select optimal spray environment, liquid distribution was measured while angle of nozzle was changed. Additionally, liquid distribution by distance and sprayed liquid capacity by side distance were measured. According to information of shapes of pear trees and cultivating environment of pear orchard, sprayer frames of an unmanned sprayer system were manufactured and sprayer frames were suitable for interval of pear trees. The sprayer system could adjust width of sprayer frames to 2.5 m and height of sprayer frames to 1.7 m. Optimal angle of nozzle, and optimal distance between objects and nozzle were $15^{\circ}$ and 0.8 m. When side distance was placed from 1.2 m to 1.8 m, sprayed capacity reached to the highest amount.

• Korean Journal of Agricultural Science
• /
• v.8 no.2
• /
• pp.212-223
• /
• 1981

The proper nozzle spacings have been tried to determined the better evenness of distribution on the development of the boom type nozzle system with three nozzles made in Korea-disk type, cap type and bolt type. The operating pressure has been changed in 7 levels ($2kg/cm^2-8kg/cm^2$) and the operating height in 3 levels (30, 40, 50cm) to find characteristics of deposit pattern and the proper spacing of each nozzle was examined and computed. The results of this study were as follows; 1. The CU(%) of the deposit distribution was improved with the operating pressure of $5kg/cm^2$ or $6kg/cm^2$ in Nozzle A with 80% and Nozzle C with 83%, and $7kg/cm^2$in Nozzle B with 80% 2. The better deposit distribution was got ten at operating height 40cm with CU 86% in Nozzle A, and 50cm in both Nozzle B, C with 80% 3. The spray deposit distribution was getting of improvement with decrease of nozzle spacing, nevertheless about half diameter of the spraying circle was recommended in regard to the cost and the work performance. 4. Improvement of quality of nozzles tested in this research may be required not to be less than their CU 90% in the use as boom-type nozzle system.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.261-269
• /
• 2022

This study was carried out to predict fruit surface temperature (FST) causing sunburn symptoms and assess the correlation between solar radiation and FST in satusma mandarin (Citrus unshiu Marc. 'Iwasaki'). And to reduce sunburn when ambient temperature was at 31℃, sprinkler system was repeated spraying every at 5 minutes of 30 minutes intervals and 1% calcium carbonate and 4% kaolin solution applied on citrus tree three times to investigate quality and sunburn of fruits. It showed highly significant positive correlation between FST and solar radiation (R = 0.788, p < 0.01), The FST increased up to 16℃ than ambient temperature at daytime. To estimate FST, a linear model y = 0.099 × (air temperature) + 0.018 × (solar radiation) + 20.779 (R = 0.687, p < 0.01) was derived. The canopy temperature of citrus trees was 5.1℃ lower in sprinkler system than in control. The incidence of sunburn showed at 2.1% in sprinkler system twice lower than in control and there was different significance. Fruit quality was similar between treatments. In conclusion, sunburn can be reduced by reflecting sunlight or downing of FST through sprinkler system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.20
• /
• pp.115-121
• /
• 1975

To achieve self-sufficiency in good production, cotton should be grown after barley in the southern part of Korea. But, this cropping system reduces cotton yields and fiber qualities in the current leading cotton varieties because of the short frost-free growth period. Ethrel-treated plots shortened the time to open boll by about 20days, increased the percentage of open bolls before the first frost from 38% to 93% and increased yield by 15-38%. There are not significant differences in staple length, tensile strength of the fiber, single bollweight, 100 seeds weight and germination percentage of the seeds between Ethrel-treated and untreated plots. Ethrel should be recommended to the farmers growing cotton after barley harvest.