• 한국환경보건학회지
• /
• 제50권1호
• /
• pp.43-53
• /
• 2024

Background: Exposure assessment is an important part of risk assessment for consumer products. Exposure models are used when estimating consumer exposures by considering exposure routes, subjects, and circumstances. These models differ based on their tiers, types, and target populations. Consequently, exposure estimates may vary between models. Objectives: This study aimed to compare the results of different exposure models using identical exposure factors. Methods: Chemical exposure from consumer products was calculated using four consumer exposure assessment models: Targeted Risk Assessment 3.1, Consumer Exposure Model 2.1 (CEM), ConsExpo web 1.1.1, and the Korean Exposure Algorithm (primary and detailed) issued by the Ministry of Environment, No. 972 (MOE). The same exposure factors were used in each model to calculate inhalation and dermal exposures to acetaldehyde, d-limonene, and naphthalene in all-purpose cleaners, leather coating sprays, and sealants. Results: In the results, TRA provided the highest estimate. Generally, MOE (detailed), CEM and ConsExpo showed lower exposures. The inhalation exposure for leather coating spray showed the largest differences between models, with differences reaching up to 1.2×10⁷ times. Since identical inputs were used for the calculations, it is likely that the models significantly influenced the estimated results. Conclusions: Despite using the same exposure factors to calculate dermal and inhalation exposures, the results varied substantially based on the model's exposure algorithm. Therefore, selecting an exposure model for assessing consumer products should be done with careful consideration.

• 공업화학
• /
• 제16권3호
• /
• pp.385-390
• /
• 2005

본 연구에서는 seed sol 부가법을 통해 나노 사이즈의 콜로이달 Ag를 제조하였다. 제조된 콜로이달 Ag 용액은 hybridizer system과 spray nozzle을 통하여 제지용 무기안료 표면에 분사한 후 이산화티탄으로 표면개질하여 기능성 항균 복합 분체를 제조하였다. 나노 사이즈의 콜로이달 Ag 제조에 있어 $AgNO_3$의 첨가와 시간의 경과에 따라 흡수도가 커지는 것으로 단위 중량당 입자의 크기가 커짐을 확인할 수 있었다. 제조된 기능성 무기안료의 항균성 측정은 균들의 해당 균주에서 시간이 증가함에 따라 균의 성장이 억제되는 결과를 나타내었고 항균접종 실험 실시 후 5~7 h 안에 항균성이 발현되면서 일정한 시간 범위 내에서의 항균력이 우수한 것으로 측정되었다. 또한 $TiO_2$의 광촉매 효과 측정 결과 benzene의 광분해 효율실험에서 반응시간 80 min 동안 60~70% 정도의 효율을 보였고, 반응시간 30 min 정도에서 이미 달성한 분해효율이 90% 이상에 도달해 있음을 알 수 있었다.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.22-27
• /
• 2017

상온진공과립분사에 의해 slide glass 기판 위에 $1{\sim}30{\mu}m$의 두께를 가진 $TiO_2$ 코팅층을 제조하였다. $TiO_2$ granule 과립분말은 $1.5{\mu}m$의 평균 입도를 가진 Rutile 형태로 $600^{\circ}C$에서 4시간 하소 과정을 거쳤다. 공정변수로서는 반복횟수, 가스유량속도 및 과립투입속도로 하여 코팅층을 제조하였다. 반복횟수가 증가할수록 코팅층의 두께는 비례적으로 증가하였다. 이는 반복횟수의 증가에도 코팅층이 형성될 수 있는 적절한 운동에너지가 작용한 것을 알 수 있다. 가스유량속도에 따라 코팅층의 두께도 증가하였으나 1.7 V의 분말공급량에서는 25 LPM의 유량까지는 코팅층의 두께가 증가했지만, 35 LPM(L/min)의 유량에서는 두께가 감소하였다. 15 LPM의 낮은 유량속도에서는 분말공급량이 충분하더라도 성막에 필요한 운동에너지의 부족으로 코팅 층의 두께가 비례적으로 증가하지 않았다. $TiO_2$ 코팅층의 미세구조는 주사전자현미경 및 고성능 투과전자현미경을 이용하여 분석하였다.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3260-3268
• /
• 2009

냉각재상실사고이후 원전의 원자로건물집수조 여과기에서 화학적 영향을 고려한 수두손실을 종합적으로 평가하기 위한 시험장치를 개발하였다. 시험장치에서 원자로건물집수조와 시험장치에서 물 부피에 대한 여과기 면적의 비가 일치하도록 시험조건을 설정하고 시험을 수행하였다. TSP pH 조절제 조건에서 칼슘실리케이트는 시험 초기에 수두손실을 급격히 상승시켰기 때문에 원자로건물에서 모든 칼슘실리케이트를 제거하여야 함을 확인하였다. 비상노심냉각계통 살수지속시간의 차이에 따른 시험결과는 장기살수조건이 단기살수조건에 비해 12배 정도 높은 수두손실을 보였다. 살수조건 시험결과를 화학적 영향이 없는 수두손실과 비교하면 단기살수와 장기살수의 각 조건에서 5.6배 및 60.8배 수두손실이 증가하는 결과를 보였다. 화학적 영향은 재순환수에 노출된 물질의 양에 따라 초기의 일정기간 동안 알루미늄 및 아연도금 판의 부식에 의해 급격히 증가하고 이들이 부동피막을 형성한 이후에는 NUKONTM 및 콘크리트 등에서 침출된 화학종의 침전에 기인하여 증가율이 감소하는 경향을 보였다. 실험결과는 TSP에 의한 알루미늄의 부동피막 형성이 살수시간이 길어지고 알루미늄의 양이 많을 경우 효과적이지 않다는 것을 보였다.

• Archives of Pharmacal Research
• /
• 제23권1호
• /
• pp.66-71
• /
• 2000

Peonjahwan, an oriental traditional medicine composed of crude herbal drugs and animal tissues is bitter and poorly water-soluble. To mask the bitterness of peonjahwan and enhance the release of bilirubin, one of the crude active ingredients of peonjahwan, peonja dry elixir (PDE), was prepared using a spray-dryer after extracting the crude materials in ethanol-water solution. coated peonja dry elixir (CPDE) was then prepared by coating the PDE with Eudragit acrylic resin. Panel assessed bitterness and release test of bilirubin from PDE and CPDE were carried out and compared with peonjahwan alone. PDE was found to have little effect upon the reduction of the bitterness of peonjahwan. However, the bitterness of CPDE was found to reduce to 1/4 of that of peonjahwan due to the encapsulation of crude active ingredients by the dextrin and Eudragit shell (P<0.05). The release rate of bilirubin from PDE and CPDE for 60 min increased about 3.5- and 2.5-fold, respectively, compared to peonjahwan at pH 1.2. It is concluded that CPDE, which masked the bitterness of peonjahwan and enhanced the release of bilirubin, is a preferable delivery system for peonjahwan.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.608-617
• /
• 2018

The effects of the purity and monoclinic phase of feedstock powder on the thermal durability of thermal barrier coatings (TBC) were investigated through cyclic thermal exposure. Bond and top coats were deposited by high velocity oxygen fuel method using Ni-Co based feedstock powder and air plasma spray method using three kinds of yttria-stabilized zirconia with different purity and monoclinic phase content, respectively. Furnace cyclic thermal fatigue test was performed to investigate the thermal fatigue behavior and thermal durability of TBCs. TBCs with high purity powder showed better sintering resistance and less thickness in the thermally grown oxide layer. The thermal durability was found to strongly depend on the content of monoclinic phase and the porosity in the top coat; the best thermal fatigue behavior and thermal durability were in the TBC prepared with high purity powder without monoclinic phase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.52-56
• /
• 2006

Some of factors affecting photo-conversion efficiency of dye sensitized solar cells (DSCs) are discussed in terms of $TiO_2$ electrodes. The first topic is on the surface modification of $TiO_2$ nano-particles, which is associated with electron traps on the surface of $TiO_2$ nano-particles. The surface is modified with dye molecules under pressurized $CO_2$ atmosphere to increase the surface coverage of $TiO_2$ nano-particles with dye molecules. This increases Jsc because of an increase in the amount of dye molecules and a decrease in the amount of trapping sites on $TiO_2$ nano-particles. In addition, the decrease in the amount of trap sites increases Voc because decreases in Voc are brought about by the recombination of $I_2$ molecules with electrons trapped on the $TiO_2$ surfaces. Selective staining for tandem cells is proposed. The second topic is on the contact between a $SnO_2$/F transparent conductive layer (TCL) and nano-particles. Polishing the TCL surfaces with silica nano-particles increases the contact, resulting in Jsc increases. The third topic is the fabrication of ion-paths in $TiO_2$ layers. Electro-spray coating of $TiO_2$ nano-particles onto TCL is shown to be effective for fabricating ion-paths in $TiO_2$ layers, which increases Jsc.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.51-56
• /
• 2011

The various process parameters of thermal spray process affects on quality of Ni-based coatings. Thus, there is need to analyze the effect of process parameters on quality of Ni-based coatings. In this paper, the effects of process parameters on hardness and wear rate of Ni-based coatings were investigated using 4 design of experiments. First, the Ni-based coatings were fabricated according to $L_9(3^4)$ orthogonal array. The hardness tests and the wear tests were performed on the Ni-based coatings. The analysis of variance for the hardness and wear rate were carried out. As a results, the acetylene gas flow and the powder feed rate were identified as main factors effected on the hardness and the oxygen gas flow and the acetylene gas flow were identified as main factors effected on the wear rate. The full factorial experiments design with different levels was applied for investigation of effect of these main factors.

• 박물관보존과학
• /
• 제9권
• /
• pp.67-83
• /
• 2008

국립중앙박물관이 소장하고 있는 청연군주 출토복식(신수751 의류 일괄) 중 織金 및 金箔이 있는 복식의 보존 처리 과정을 소개하고자 한다. 금사 및 금박의 비파괴분석(X-선형광분석:XRF)을 실시한 다음 표면의 금(Au)이 열화가 진행되면서 분상화된 금층에 아교 2%용액을 도포하여 접착력을 강화하였다. 표면의 먼지와 오염물제거를 위해 진공흡입을 통한 건식세척과 분사식 습식세척을 병행하였고 손상부분을 보수하여 유물의 원형을 회복하였다.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.135-141
• /
• 2018

Stainless steel is being used in various industries such as automobile and aerospace for its cheap manufacturing cost and excellent mechanical properties. However, stainless steel failed to stably protect a specimen with a $Cr_2O_3$ protective layer at temperatures above $1000^{\circ}C$. Thus, improving the high temperature flame resistance of the specimen through additional surface coating was needed. In this study, multilayer coatings of YSZ and $Al_2O_3$ were performed on SUS 304 specimens using pack cementation coatings and thermal plasma spray. The multilayer coated specimen showed enhanced thermal properties due to the coated layers. The microstructures and phase stability are discussed together with flame conditions at $1350^{\circ}C$.