• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.541-547
• /
• 2019

A novel photonic crystal fiber (PCF) sensor with three D-shaped holes based on surface plasmon resonance (SPR) is analyzed in this paper. Three D-shaped holes are filled with the analyte, and the gold film is deposited on the side of three planes. The design of D-shaped holes with outward expansion can effectively solve the uniformity problem of metallized nano-coating, it is beneficial to the filling of the analyte and is convenient for real-time measurement of the analyte. Compared with the hexagonal lattice structure, the triangular arrangement of the clad air holes can significantly reduce the transmission loss of light and improve the sensitivity of the sensor. The influences of the air hole diameter, the distance between D-shaped holes and core, and the counterclockwise rotation angle of D-shaped holes on sensing performance are studied. The simulation results show that the wavelength sensitivity of the designed sensor can be as high as 10100 nm/RIU and the resolution can reach 9.9 × 10^-6 RIU.

• Journal of Microbiology
• /
• v.43 no.spc1
• /
• pp.110-117
• /
• 2005

Salmonella enterica serovar Typhimurium causes human gastroenteritis and a systemic typhoid-like infection in mice. A critical virulence determinant of Salmonella is the ability to invade mammalian cells. The expression of genes required for invasion is tightly regulated by environmental conditions and a variety of regulatory genes. The hilA regulator encodes an OmpR/ToxR family transcriptional regulator that activates the expression of invasion genes in response to both environmental and genetic regulatory factors. Work from several laboratories has highlighted that regulation of hilA expression is a key point for controlling expression of the invasive phenotype. A number of positive regulators of hilA expression have been identified including csrAB, sirA/barA, pstS, hilC/sirC/sprA, fis, and hilD. HilD, an AraC/XylS type transcriptional regulator, is of particular importance as a mutation in hilD results in a 14-fold decrease in chromosomal hilA::Tn5lacZY-080 expression and a 53-fold decrease in invasion of HEp-2 cells. It is believed that HilD directly regulates hilA expression as it has been shown to bind to hilA promoter sequences. In addition, our research group, and others, have identified genes (hilE, hha, pag, and lon) that negatively affect hilA transcription. HilE appears to be an important Salmonella-specific regulator that plays a critical role in inactivating hilA expression. Recent work in our lab has been directed at understanding how environmental signals that affect hilA expression may be processed through a hilE pathway to modulate expression of hilA and the invasive phenotype. The current understanding of this complex regulatory system is reviewed.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.1
• /
• pp.141-144
• /
• 2006

An antibody layer was fabricated to detect Escherichia coli O157:H7. The micropattern of 16-mercaptohexadecanoic acid (16-MHDA) as alkylthiolate was formed on the gold surface by using the PDMS stamp with microcontact printing $({\mu}CP)$ techniques. In order to form antibody patterns on the template, protein G was chemically bound to the 16-MHDA patterns, and antibody was adsorbed on a self-assembled protein G layer. The formation of the 16-MHDA micropattern, self-assembled protein G layer and antibody pattern on Au substrate was confirmed by surface plasmon resonance (SPR) spectroscopy. Finally, the micropatterning method was applied to fabricate the antibody probe for detection of E. coli O157:H7, and monitoring of antigen by using this probe was successfully achieved.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.12-18
• /
• 2015

The ultimate goal of developing body is revealed the "lightweight" at latest EuroCarBody conference 2012 and the most core technology is joining process to make lightweight car body design. Accordingly, in this study, the car body assembly line for the assembly process applies to any introduction, particularly in the assembly of aluminum alloy and composite materials applied by the process for the introductory approached. Process were largely classified by welding (laser, arc, resistance, and friction stir welding), bonding (epoxy bonding) and mechanical fastening (FDS, SPR, Bolting and clinching). Applications for each process issues in the case and the applicable award was presented, based on the absolute strength of the test specimens and joining characteristics for comparative analysis were summarized. Finally, through this paper, we would tried to establish the characteristics of the joint for lightweight structure.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.288-295
• /
• 2003

An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the recovery technique. In case of the recovery technique, the SPR(superconvergent patch recovery) approach has been modified for p-adaptive mesh refinement. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly. To verify the proposed algorithm, the limit value approach is proposed which utilizes the exact strain energy computed from the extrapolation equation. A new pre-processor is developed for the p-version finite element program in which the vector graphic editor is used for the automatic generation of node connection and coordinate by halfedge solid data structure according to uniform or nonuniform p-distribution. The general 2-D algorithm is also developed to generate face modes and internal modes in accordance with different mesh types. The quality of the error estimator is investigated with the help of two mumerical examples. The results show that the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1840-1842
• /
• 2002

고전압 대 전류를 필요로 하는 펄스 파워 시스템에서 스위치는 중요한 소자중의 하나이다. 펄스 트랜스포머를 이용하여 고전압 펄스를 만드는 회로에서 대전류 스위칭에는 대부분 스파크 갭 스위치나 싸이라트론을 사용하는데 높은 펄스 반복 율과 긴 수명을 제공하기 위해서는 반도체 스위치를 사용해야한다. 고전압 대전류 펄스파워 시스템에 적합한 반도체 스위치의 스위칭 특성과 제어방식에 관한 연구를 수행하였다 실험에 사용한 스위치는 20 kV, 12.6 kA, 12 ${\mu}s$의 펄스 스위칭이 가능한 ABB사의 반도체스위치 스택 (5SPR-26L4508-8-WC)이다. 실험회로는 콘덴서에 충전을 완료한 다음 스위치와 인덕터를 통하여 방전하도록 구성하였다. 8개의 직렬 연결된 스위치는 광케이블을 사용하여 병렬구동하고, 고주파 스위칭 전류전원을 사용하여 고전압 절연을 하면서 게이트 구동전력을 전달하도록 하였다. 본 논문에서는 스위치 전압과 방전전류를 관측하여 반도체 스위치의 특성을 조사하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.110-111
• /
• 2013

FcBP consisting of 13 amino acids specifically binds to Immunoglobulin G Fc domain. Initially, we utilized this peptide for preparation of antibody chip as a PEG composite for enhanced solubility. After then, the peptide conjugate was immobilized on agarose resin, resulting in highly efficient affinity column for antibody purification. The efficiency was comparable to commercial Protein A column. Recently, this peptide was conjugated with cell penetrating peptide (CPP) on a backbone of GFP, affording antibody transducer, which carries antibody into live cells by simple mixing of antibody and the transducer in cell culture media. Antibody transduction into cells was monitored by live cell imaging. More recently, the FcBP was fused to ferritin cage, which consists of 24 ferritin protein molecules. The FcBP-ferritin cage showed greatly increased binding affinity to human IgG. Its binding was analyzed by QCM and SPR analysis. Finally, it was selectively delivered by Herceptin to SKBR3, a breast cancer cell, over MCF10A, non-tumorigenic cells (Fig. 1). Fig. 1. Fluorescent microscopic images of SKBR3 breast cancer cells (A~C) and MCF10A breast cells (D~F) treated with Cy3-trastuzumab/fFcBP-Pf_Fn complexes. Trastuzumab and FcBP-Pf_Fn, which were labeled with Cy3 (Cy3-trastuzumab) and fluorescein (fFcBP-Pf_Fn), respectively, selectively targeted SKBR3 over MCF10A.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.10
• /
• pp.1191-1196
• /
• 2009

The production of Streptomyces griseus trypsin (SGT) by S. griseus IFO13350 transformed with the expression vector pWHM3-TR1R2, containing sprT encoding SGT and the two positive regulatory genes sgtR1 and sgtR2, was investigated in various media. Cultivation in Ferm-0 gave 1.4 times more trypsin activity than in C5/L medium. In addition, replacement of 2% glucose and 1% skim milk in Ferm-0 with 2% dextrin and 1% tryptone (designated Ferm-II) enhanced trypsin activity 4.1-fold. To simplify the purification process, the supernatant from the S. griseus transformant cultured in Ferm-II medium was fractionated with ammonium sulfate (25-55%), then subjected to Hitrap Benzamidine FF affinity column chromatography. The specific activity of SGT purified by one-step chromatography was 69,550 unit/mg protein and the overall purification yield was above 8%, indicating that this method is more effective than those previously reported. Purified SGT was most active at pH 8.0 and $50^{\circ}C$, and it maintained activity between pH 7.0 and 9.0 and at temperatures up to $70^{\circ}C$. These enzymatic properties are very similar to those of authentic eukaryotic trypsin purified from bovine pancreas.

• The Korean Journal of Rehabilitation Nursing
• /
• v.9 no.2
• /
• pp.109-116
• /
• 2006

Purpose: This study is a descriptive research in which the pathological syndromes of the schizophrenic patients in the community mental health centers, the degrees of the insights, and the correlations between them were examined. Method: The subjects included 114 SPR pt. people who were enrolled in community mental health centers located in D City. The research was conducted during the period from Aug. 1st, 2002 to Jul. 30th, 2004. The instruments were PANSS developed by Kay(1987) and SUMD developed by Amador(1993). Results: Among the pathological syndromes, positives ones were $12.64{\pm}3.80$ on the average, negative ones were $32.00{\pm}5.36$, and general pathological syndromes were $30.50{\pm}6.24$. In the evaluation of the insights, the mean score was $11.81{\pm}5.09$. There were some significant correlations between positive syndromes and general pathological ones (r=.572, p=.000), and negative syndromes and general pathological ones(r=.262, p=.029), while there was no significant correlation between the insights and the sub-measures of general pathological syndromes. Conclusion: Therefore, the schizophrenic patients taking advantage of the community mental health centers have more negative syndromes than those in hospitalized, and rehabilitation programs are needed to help them continuously. And the further study of the correlations between the pathological syndromes and the degrees of the insights are required, and still, it should be analyzed what effects the insight acquirement brings about to the improvements of the pathological syndromes after the application of the insight-oriented programs.