• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.624-634
• /
• 2011

The purpose of this study is to develop the pattern of safety clothes used at flat or mountainous areas and to identify the pattern of safety clothes by conducting experimental evaluation of virtual wear. Three subjects were selected, based on fire fighters' physical constitution. A prototype design for safety clothing was determined after in-depth interviewing of professionals and surveying of Forest service staff and related agency. Wearing test should be carried out in the order of pattern making, virtual and real wearing evaluation. For data analysis, technical statistical values should be obtained by using body measurements of subject, frequency analysis and T-test. The jacket is designed to have a front extension and the entire length of clothing enough for wearer to put on it over ordinary shirts or sweater. The collar of jacket is of round type. Cyber reality enables to identify the movement and activity of virtual fitting model and to find out errors or problems in safety clothing prior to on-the-spot wear test, thus raising the precision level of pattern. There was significant difference between real and virtual fit preference. The results show that the virtual try-on system need the development of a specific style.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.49-56
• /
• 1997

Effect of process parameters on the quality of condenser discharge weld for coated sheet steels was discussed. The welding specimens were coated with pure Zn of 20/20 g/m2 in the production line. Direct measurements of welding parameters such as the discharge current, the pressures and the voltage drop across the electrodes were carried out with welding process monitoring system. High speed camera was also utilized to analyze the weld formation process. Test results indicated that the relation between weld strength and applied energy was stabilized at the acceptable welding heat input range. It was thought that the acceptable welding heat input should be redefined based on the monitored data because the calculated value of the welding heat input could hardly be utilized if the discharge condition was changed. Mechanical test results and high speed photographs showed that expulsion deteriorated the weld quality and the strength at the same time especially when the size of the spatter was large enough to carry the molten metal, which should form the nugget, out of the welding spot. Results also demonstrated that the discharge current should be applied at the appropriate time during the process because sufficient nugget was not produced if the time was deviated from the optimum range.

• 한국군사과학기술학회지
• /
• 제6권2호
• /
• pp.73-82
• /
• 2003

For measurements and analysis of dielectric characteristics of planar slabs of microwave absorbing materials, I have applied a free-space method in the frequency range of 8~14 GHz. The measurement system for free-space method consists of transmit and receive antennas, mode transitions, precision coaxal cables, the network analyzer, and a computer Special Spot-focused horn lens antenna was used to eliminate diffraction effects. Diffraction effects at the edges of the sample are minimized by satisfying the condition for minimum transverse dimension of the plate and the beamwidth of the antennas at the focus. The time-domain gating feature of the network analyzer and the thru, reflect, and line(TRL) calibration technique were used to eliminate the effects of undesirable multiple reflections. The complex coefficients of reflection and transmission, $S_{11}$ and $S_{21}$, of planar samples were measured for standard materials such as Teflon, Rexolite$\textregistered$ 2200. The results were compared with existing measurement method. And I applied a free-space method for measurement to measure dielectric constants of some electromagnetic absorbing materials. Dielectric properties for the same samples were also measured with a 7mm coxial transmission line method for purposes of comparison with the free-space method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.3-4
• /
• 2008

Photovoltaic module consists of serially connected solar cell which has low voltage characteristics. But, the other way, the whole current flow of PV module is restricted by lowest current of one solar cell. For the experiment, we make PV module composing the solar cells that have short circuit current difference of 0%, 1%, 3% and 5%. Using Light I-V and Dark I-V measurements, electrical characteristic parameters like Isc(short-circuit current), Voc(open-circuit voltage), Rs(series resistance), Rsh(shunt resistance) are analyzed. PV module of low current characteristics has electrical stress from other modules. And, such a module has a tendency of hot-spot suffering which leads degradation.

• Animal cells and systems
• /
• 제14권3호
• /
• pp.213-219
• /
• 2010

Bottlenose dolphins (Tursiops sp.) commonly inhabit Korean waters, including the coastal waters of Jeju Island. However, their taxonomic position was unclear because of the validity of this genus. The genus Tursiops has recently been determined to comprise two species: the common bottlenose dolphin (Tursiops truncatus) and the Indo-Pacific bottlenose dolphin (Tursiops aduncus). To confirm the taxonomic position of bottlenose dolphins frequenting the coastal waters of Jeju Island, the external morphology and osteology of specimens from Jeju Island were examined. Photographs of free-swimming individuals were also used for determining external morphological characters. The cranial and meristic measurements fell within the ranges of T. aduncus. Osteological ratios were also consistent with those of T. aduncus. The presence of a prominent ventral spot was observed among some individuals. As a result, the dolphins mainly distributed in the coastal waters of Jeju Island were identified as Indo-Pacific bottlenose dolphins (T. aduncus) in terms of their cranial characters and ventral spotting. We propose a new Korean name, 'Nambang-keun-dol-go-rae'.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.328-334
• /
• 2024

The activation method of metallic foils is an important technique to measure the flux and energy of proton beams. In this paper, the method was used to measure the CSNS APEP proton flux at seven nominal proton energies ranging from 10 MeV to 70 MeV for beam spot sizes of the 20 mm × 20 mm and 50 mm × 50 mm. The reactions of ^natTi(p, x)⁴⁸V, ^natNi(p, x)⁵⁷Ni, ^natCu(p, x)⁵⁸Co, and ²⁷Al(p, x)²⁴Na were employed to measure the proton beam flux with a range of 10⁷-10⁹ p/cm²/s. Furthermore, we also proposed a method using the activity ratio with a stacked-foil target to determine the energy spread of a Gaussian-like distribution for different nominal proton energies. The optimal combinations of Al, Cu, Ti, Ni, Mo, Fe, Nb, and In foils were adopted for the proton energies. The measured energy spreads for degraded beams of 30 MeV-70 MeV were found to be smaller than 10.00%.

• 한국대기환경학회지
• /
• 제27권2호
• /
• pp.201-208
• /
• 2011

Recently, a real-time, pocket-sized aethalometer (microAeth$^{(R)}$ model AE51) has been developed by Magee Scientific Inc. for measuring the concentration of black carbon in the atmosphere. In this study, two aethalometers, models AE-16 and AE-51, which measure the optical absorption of carbon particles at infrared 880 nm, were operated at time interval of 5-min between January 9 and February 10, 2010 at an urban site of Gwangju, to compare the accuracy of black carbon (BC) concentrations reported from the AE-51 model and to investigate reasonable sampling time of filter media in the AE-51. The air samples in the AE-51 and AE-16 models are collected on T60 (Teflon coated glass fiber) filter media (filter spot area: 0.07 $cm^2$) and quartz fiber roll-tape filter (filter spot area: 1.67 $cm^2$), respectively. Real-time measurement results indicate that when the filters were clean, the AE-51 BC was greater than or similar to the AE-16 BC data. However as the filter spots become darker, the AE-16 BC concentrations were higher than the AE-51 BC data and the difference in the BC concentrations from two AE models becomes gradually increased. Relative error in the AE-51 and AE-16 BC concentrations showed significance difference depending on used time of the filter in the AE-51 model, weather pattern, levels of air pollution, etc, ranging from 11.5% (used time of the filter in AE-51: 1,595 min) to 52.5% (used time of the filter in AE-51: 2,085 min). When considering the used time of one filter ticket in the AE-51 model and difference (or relative error %) between AE-16 and AE-51 BC concentrations, it is recommended that the standard sampling time per one filter ticket within the AE-51 model be less than approximately 24 hr (1,440 min) under the normal weather conditions except for severe haze and mist events.

• 지구물리와물리탐사
• /
• 제2권2호
• /
• pp.96-103
• /
• 1999

현재까지의 해수침투에 관한 대부분의 연구들은 조사방법상, 지구물리적 방법과 지구화학적 방법으로 뚜렷이 구분지어 접근되어왔다. 본 논문에서는 경기도에 위치한 해안 경작지 하부로의 해수침투 문제를 경제적이면서 효율적으로 접근하기 위하여 한 조사 지역에 대하여 두 탐사 방법을 동시에 적용하고자 하였다. 본 연구에서는 슬림버져 배열의 전기비저항 수직탐사, 주파수 영역 전자탐사 그리고 대상 지역 내 지하수에 대한 지화학 분석 등의 탐사방법이 적용되었다. 지구물리적 방법으로 적용된 전기비저항 수직탐사는 관개 경작지에 물이 없을 때 실시하였으며, 전자탐사는 경작지 내 관개수가 유입된 후에 측정하였다. 이러한 동일 조사 지역에서의 시기를 달리한 측정은 지하수량의 변화에 따른 전기 비저항 이상 지역의 분포 변화를 살피기 위하여 실행되었으며 결과적으로 지하수량의 증가로 인해 전기비저항이 낮아진 지역을 동일한 양상을 보이는 해수침투 지역으로부터 구분할 수 있었다. 앞의 지구물리 탐사결과를 뒷받침하기 위하여 대상 지역 내에 23곳의 사용중인 지하수를 채집하여 지구화학적 분석을 실시하였다. 지구화학 분석결과, 앞의 지구물리 탐사결과에서 밝혀진 해수침투 지역과 가장 가까운 곳의 물시료에서 농업용수 기준(250 mg/l)을 초과하는 높은 염도를 나타내었으며 수소와 산소원소를 이용한 동위원소 분석과 통계방법인 주성분 분석을 통하여 내륙 지역에서 나타난 지하수내의 높은 염분은 상부 주택가로부터 유입되었음을 알 수 있었다.

• 한국항공우주학회지
• /
• 제43권6호
• /
• pp.507-515
• /
• 2015

본 논문에서는 빠르게 기동하는 표적의 상태벡터를 효과적으로 추정하는 필터링 기법을 제안한다. 적 미사일을 높은 확률로 요격하기 위해서는 스윗 스팟이라고 불리는 지점을 타격해야 하며, 이를 위해서는 표적의 길이와 위치를 정확히 추정해야 한다. 논문에서는 FMCW 레이다에 기반하여 고분해능 거리 프로파일(HRRPs)을 생성한 후 제안된 필터링 기법을 통해 표적의 길이와 움직임을 추정하고 있다. 실제에 가까운 레이다 측정치를 모사하기 위해 ISAR 이미지를 통해 각도에 따른 표적의 산란점 특성에 대한 연구가 진행되었다. 또한 측정 잡음 공분산 행렬 R 이 고정되어 있는 기존의 칼만 필터의 경우 SNR 값이 급격히 변화하는 상황에서는 표적의 효과적인 추적이 어려우며, 제안된 기법에서는 공분산 행렬 R 을 측정값을 이용해 지속적으로 개선하며 표적을 추적하게 된다. 기법의 성능 확인을 위해 요격 미사일이 목표물을 추적하는 상황에 대하여 시뮬레이션이 수행되었으며, 시뮬레이션 결과는 제안된 필터링 기법이 실제 데이터에 효과적으로 수렴함을 보인다.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.185-189
• /
• 2012

We report plasma-assisted molecular beam epitaxy of $In_XGa_{1-X}N$ films on c-plane sapphire substrates. Prior to the growth of $In_XGa_{1-X}N$ films, GaN film was grown on the nitride c-plane sapphire substrate by two-dimensional (2D) growth mode. For the growth of GaN, Ga flux of $3.7{\times}10^{-8}$ torr as a beam equivalent pressure (BEP) and a plasma power of 150 W with a nitrogen flow rate of 0.76 sccm were fixed. The growth of 2D GaN growth was confirmed by $in-situ$ reflection high-energy electron diffraction (RHEED) by observing a streaky RHEED pattern with a strong specular spot. InN films showed lower growth rates even with the same growth conditions (same growth temperature, same plasma condition, and same BEP value of III element) than those of GaN films. It was observed that the growth rate of GaN is 1.7 times higher than that of InN, which is probably caused by the higher vapor pressure of In. For the growth of $In_xGa_{1-x}N$ films with different In compositions, total III-element flux (Ga plus In BEPs) was set to $3.7{\times}10^{-8}$ torr, which was the BEP value for the 2D growth of GaN. The In compositions of the $In_xGa_{1-x}N$ films were determined to be 28, 41, 45, and 53% based on the peak position of (0002) reflection in x-ray ${\theta}-2{\theta}$ measurements. The growth of $In_xGa_{1-x}N$ films did not show a streaky RHEED pattern but showed spotty patterns with weak streaky lines. This means that the net sticking coefficients of In and Ga, considered based on the growth rates of GaN and InN, are not the only factor governing the growth mode; another factor such as migration velocity should be considered. The sample with an In composition of 41% showed the lowest full width at half maximum value of 0.20 degree from the x-ray (0002) omega rocking curve measurements and the lowest root mean square roughness value of 0.71 nm.