• 제목/요약/키워드: split-beam

검색결과 150건 처리시간 0.027초

Three-dimensional evaluation of mandibular width after mandibular asymmetric setback surgery using sagittal split ramus osteotomy

  • Seong-Sik Kim;Sung-Hun Kim;Yong-Il Kim;Soo-Byung Park
    • 대한치과교정학회지
    • /
    • 제53권2호
    • /
    • pp.99-105
    • /
    • 2023
  • Objective: The study aimed to evaluate the changes in mandibular width after sagittal split ramus osteotomy (SSRO) in patients with mandibular asymmetric prognathism using cone-beam computed tomography (CBCT). Methods: Seventy patients who underwent SSRO for mandibular setback surgery were included in two groups, symmetric (n = 35) and asymmetric (n = 35), which were divided according to the differences in their right and left setback amounts. The mandibular width was evaluated three-dimensionally using CBCT images taken immediately before surgery (T1), 3 days after surgery (T2), and 6 months after surgery (T3). Repeated measures analysis of variance was applied to verify the differences in mandibular width statistically. Results: Both groups showed a significant increase in the mandibular width at T2, followed by a significant decrease at T3. No significant difference was observed between T1 and T3 in any of the measurements. No significant differences were found between the two groups (p > 0.05). Conclusions: After mandibular asymmetric setback surgery using SSRO, the mandibular width increased immediately but returned to its original width 6 months after surgery.

지향성 안테나 빔의 최적 제어 방식 (Optimal Control Method of Directional Antenna Beam)

  • 현교환;정성부;김주웅;엄기환
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 춘계종합학술대회
    • /
    • pp.717-720
    • /
    • 2007
  • 본 연구에서는 지향성 안테나 빔의 최적방향을 찾고 유지하는 방법을 제안한다. 제안한 방식은 데이터에 안테나의 정보를 같이 실어 보내고 그 정보를 이용하여 변형된 유전자 알고리즘(MGA)으로 최적의 방향을 찾고 유지 한다. 제안한 방식은 각 스테이션에서 전송하는 데이터에 안테나의 정보를 같이 전송하며 안테나의 RSSI(Received Signal Strength Indication)를 구하고 그 RSSI 값의 곱을 적합도 함수로 이용하여 그 값이 최대가 되는 방향을 찾는 방식이다. 통신 방식은 시분할 이중화(TDD: Time Division Duplex)방식으로 안테나의 제어 정보를 보낸다. 또한 염색체 구성에 있어서 16bit split 방식을 제안하여 탐색에 적용한다. 제안한 방식의 유용성을 확인하기 위하여 1:1, 1:2, 1:5 지향성 안테나의 세 가지 경우에 대한 최적 방향 탐색의 시뮬레이션과 1:1 지향성 안테나의 최적 방향 탐색에 대한 실험을 통하여 성능을 비교 검토하였다. 염색체의 비트 수는 각각 8비트, 16비트, 그리고 16비트 스플릿으로 16비트 스플릿의 경우 8비트만을 사용하여 16비트와 비슷한 성능을 가졌다.

  • PDF

수도에 대한가리분시에 관한 연구 -가리의 분시시기에 관하여- (Studies on the Effect of Potassium Split Application on Paddy -On the Time of Potassium Split Application-)

  • 오왕근;이상범;박찬호;김성배
    • 한국작물학회지
    • /
    • 제17권
    • /
    • pp.143-148
    • /
    • 1974
  • 수도'진흥'에 대한 가리의 분시시험을 습도 및 동답의 작토를 담은 폿드에서 실시하여 얻은 수량과 수량구성요소를 분석검토한 결과는 다음과 같다. 1. 가리의 분시회수와 분시하는 시기에 따라 벼의 수수와 임실립수(1000립중이 27.8g인 것으로 환산한 수)는 달라지는데 석회나 생고를 시용하지 않은 원토에서는 가리를 유수형성기와 출수기에 결시했을 때의 임실립수가 크게 적어져서 상조수량이 낮아지고, 원토에 석회를 시용했을 때는 분시회수가 늘어서 기비에 들어가는 가리량이 적을수록 수수가 적어져서 수량이 낮아졌다. 원토에 생고를 시용했을 때는 석회를 시용했을 때와 비슷한 경향이었다(폿드시험). 2. 유효분고기에 가리를 추비하는 것은 수수를 증가하는 대신, 임실립수를 감소시켜 오히려 수량을 감소하는 것 같았다(폿드시험). 3. 정보와 생고를 생산량으로 본 자연습답(포장시험)에서의 가리 분시효과는 그 크기가 현저하지 않으나, 석회생고를 시용하지 않고 원토 그대로를 가지고 시험했을 때와 유사한 경향이었다. (1과2항참조). 4. 수수와 임실립수간에는 서로 역상관이 있는데 원토에서는 예각의 직선관계를 석회나 생고를 시용했을 때는 원만한 곡선관계를 후자가 벼의 다수확에 위험성이 적었음을 암시하였다. 5. 생고의 시용이 석회의 시용과 유사한 결과를 보인 것은 폿드시험이란 조건외에 생고가 가리를 공급했기 때문으로 여겨졌다.

  • PDF

늦은 용액증발법으로 제작한 유기단결정 para-toluene sulfonate의 비선형 광학상수 측정 (Measurement of nonlinear optical constant of organic single crystal para-toluene sulfonate prepared by slow solution evaporation method)

  • 황보창권
    • 한국광학회지
    • /
    • 제9권2호
    • /
    • pp.76-85
    • /
    • 1998
  • 서서히 용액을 증발시키는 늦은 용액증발법을 이용하여 유기단결정 p-toluene sulfonate(PTS) 덩어리와 박막을 제작하였다. 유기 단결정 PTS 덩어리는 Z-scan 방법을 이용하여 1600 nm, 95fs 레이저 광으로 3차와 5차 비선형 굴절률 $n_{2}$$n_{3}$를 측정하였으며, PTS 박막 도파관에서는 다중모드 출력을 관측하였다. 입력광의 세기가 2~5 GW/$cm^{2}$영역에서 PTS의 비선형 광학계수는 $n_{2}=6{\times}10^{-4}cm^{2}$/GW, $n_{3}=-7{\times}10^{-5}cm^{4}/GW^{2}$이고 2광자 흡수와 3광자 흡수는 없었다. 빛의 세기가 강한 5~16 GW/$cm^{2}$영역에서는 비선형 슈레딩거식과 빠른 푸리에변환 광전파방법을 이용하여 시료 내에서 전파광의 모양이 가우시안 광에서 왜곡되어 전파되는 것을 전산모의하였다.

  • PDF

수평스티프너를 이용한 철골 기둥-보 약축접합부 상세 개발에 관한 연구 (Development of Beam-to-Column Connection Details with Horizontal Stiffeners in Weak Axis of H-shape Column)

  • 이도형;함정태;김성배;김영호;김상섭
    • 한국강구조학회 논문집
    • /
    • 제16권5호통권72호
    • /
    • pp.641-652
    • /
    • 2004
  • 철골 기둥-보 강축 접합부에 대한 연구는 그 동안 국내외에서 오랜 기간 연구가 진행되어 내진성능 및 접합부의 강도를 개선시킬 수 있는 많은 접합 형식이 개발되어 사용 중에 있으나, 약축 접합 형식에 대한 연구는 거의 없는 실정이다. 또한 현재 국내에서는 시공성을 고려하여 기존의 브라켓형식 용접 접합부를 선호하고 있으나, 용접량이 많아 취성적인 거동이 우려되며 과대 설계된 경향이 있다. 본 연구의 실험 결과에서 기존 브라켓 형식 용접접합은 용접량이 과도한 것으로 나타났으며, 기둥 웨브와 보의 웨브의 용접은 불필요한 것으로 판단된다. 그리고 본 연구에서 제안한 새로운 기둥-보 약축 접합형식들에 대한 실험 결과에서 기존 브라켓형식 용접접합보다 우수한 내력 및 연성을 보유하여 구조적으로 안전함을 확인할 수 있었다.

Cone-Beam CT를 이용한 악교정 수술용 스텐트 제작과 임상 적용 (SURGICAL STENT FABRICATION AND CLINICAL APPLICATION FOR ORTHOGNATHIC SURGERY USING Cone-Beam CT)

  • 김용일;김종렬;김성식;손우성;박수병
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제31권2호
    • /
    • pp.158-166
    • /
    • 2009
  • The application of CT with basis on 3 dimensional-reconstruction is getting more widely practiced. With the data obtained from cone-beam computed tomography(CBCT), not only the diagnosis of the patient with skeletal abnormality but also the virtual simulation of the orthognathic surgery were performed and its application would be popular in orthodontic field. We reported a case, a 19-year old man who was diagnosed mandibular prognathism and required orthognatic surgery. In this case, the virtual orthognathic surgery was simulated and surgical wafer was fabricated by using CBCT data. That wafer was applied the actual orthognathic surgery. After preoperative orthodontic treatment, we prepared surgery as follows. : (l)Acquisition of 3D image data, (2)Reconstruction of 3-dimensional virtual model, (3)Virtual model surgery, (4)Extraction of stere-olithographic image, (5)Check-up for occlusal interference, (6)Fabrication of surgical stent by stereolithography. Bilateral sagittal split ramus osteotomy was operated and used stereolithographic surgical stent. 1 month later, we superimposed CBCT datas of virtual surgery and that of actual surgery, and then compared the result. CT data's application for othognathic surgery yielded satisfactory outcomes.

부레를 가진 어류의 음향산란 강도에 관한 연구: 참돔의 길이 및 행동에 따른 산란강도 (Study on the Backscattered Signal of Swimbladdred Fish: Target Strength due to Length and Behavior of Red Seabream (Pagrus Major))

  • 강돈혁;황두진;나정열;김수암
    • 한국음향학회지
    • /
    • 제20권5호
    • /
    • pp.100-109
    • /
    • 2001
  • 부레를 가진 어류의 산란 강도를 조사하기 위하여 길이가 다른 참돔 (red seabream, pagrus major)을 이용한 음향 실험을 실시하였다. 대상 어류를 살아 있는 상태로 - (1) 망 내에 각각 넣은 후, (2) 자유 유영 상태로 놓은후 - 3개의 음향센서 (38, 120, 200kHz)를 이용하여 길이에 따른 산란강도를 측정하였다. 실험 결과 길이에 따른 참돔의 산란 강도는 각 주파수별로 TS/sub 38㎑/=20 log/sub 10(l)/ -66.41, TS/sub 120㎑/=20 log/sub lo(1)/ -71.80, TS/sub 200㎑/=20 log/sub 10(1)/ -73.94로 나타났다. 실험 결과와 이론 모델을 비교하기 위하여 어류의 형태를 근거로 한 Helmholtz-Kirchhoff 음선 근사법을 사용한 결과, 산란강도는 어류 몸체보다는 부레에 의한 효과가 95%이상으로 나타났다. 한편, 수신된 산란강도 자료를 이용한 확률밀도 함수로부터 어류의 행태에 따른 산란강도 변위는 망 내의 산란체에서는 가우스 확률밀도함수 (Gaussian PDF)로, 자유 유영 상태에서는 레일리 확률밀도함수 (Rayleigh PDF) 특성을 나타냈다.

  • PDF

코발트-60의 조사야(照射野) 변형(變形) 및 반음영(半陰影) 차폐(遮蔽)효과에 따른 선량분포(線量分布)에 관한 연구(硏究) (A Study on the Dose Distribution of Various Field and Penumbra Shield in the Telecobalt-60)

  • 김영일;이혜경
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제8권2호
    • /
    • pp.71-72
    • /
    • 1985
  • This study was performed on the dose distribution of various field size and the effect of penumbra shield in the telecobalt unit. The results obtained are as follows. 1. Errors of the light and ${\gamma}-ray$ field size was below the regulation as 0.52 percentage. 2. The coefficient of field area was increased with the larger field area, and this coefficient was showed the more difference in larger SSD. 3. The rectangular field areas, which were described by level of the same percentage depth does, were decreased with the more elongation factor. At the same elongation factor, the compensating factor was decreased with the larger field size. 4. The lead block or extension collimator was able to shield r-ray exposure of outside field size from 50 to 80 percentage. 5. On the matching adjacent fields, while the gap between beam edges are contacted, that overlapped beam edges indicated up to 140 percentage, and while the gap was 1 cm, it could be reduced to 90 Percentage. The lead-libocking on the overlapped area was more effective to lower dose, as 80 percentage in this case. 6. Percentage depth dose of various trimming field sizes were increased linearlly according to area 1 perimeter size, but the center split field size did not maintain linearlly.

  • PDF

Electroreflectance 측정에 의한 Si이 첨가된 $Al_{0.32}Ga_{0.68}As$에서의 $E_1$ 전이에 대한 연구 (A Study on $E_1$Transition in Si-Doped $Al_{0.32}Ga_{0.68}As$by Electroreflectance Measurement)

  • 김동렬;손정식;김근형;이철욱;배인호
    • 한국전기전자재료학회논문지
    • /
    • 제11권9호
    • /
    • pp.687-692
    • /
    • 1998
  • Silicon doped $Al_{0.32}Ga_{0.68}As$ were growth by molecular beam epitaxy. Electroreflectance(ER) spectra of the $E_1$ transition of Schottky barrier Au/n-$Al_{0.32}Ga_{0.68}As$ have been measured at various modulation voltage($V_{ac}$) and dc bias voltage($V_{bias}$). from the $E_1$peak, band gap energy of the $Al_{0.32}Ga_{0.68}As$ is 1.883 eV which corresponds to an Al composition of 32%. As modulation voltage($V_{bias}$) is changed, a line shape at the $E_1$transition does not change, but its amplitude varies linearly. The amplitude of $E_1$signal decrease with increasing the forward dc bias voltage($V_{bias}$), but the line shape does not change. It suggests that the low field theory rather than Franz-Keldysh oscillation is Required to interpret spectra. Also, spectra at the $E_1$transition were broadened with increasing the reverse dc bias voltage($V_{bias}$) which suggests the presence of Field-induced broadening.

  • PDF

Real-time Measurement of Full Field Retardation Near Quarter Wavelength

  • Liu, Longhai;Zeng, Aijun;Yuan, Qiao;Zhu, Linglin;Fang, Ruifang;Huang, Huijie
    • Journal of the Optical Society of Korea
    • /
    • 제16권4호
    • /
    • pp.457-461
    • /
    • 2012
  • A real-time method to measure full field retardation near quarter wavelength is proposed. The circularly polarized beam passes through a sample with a large aperture. The measuring beam then goes through a quarter-wave plate and is then split by a Wollaston prism. An image with two sub-images is then detected by a high-speed image sensor. The full field retardation near quarter wavelength can be obtained in real time by processing the image. The measured retardation is independent of the fast axis angle of the sample and the fluctuation of the initial intensity. In experiments, a wedge waveplate is measured with different fast axis angle and initial intensity, and the full field retardations are acquired. The maximum and standard deviation of the full field retardation is $1.5^{\circ}$ and $0.4^{\circ}$. The validity of the method is verified.