• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.3
• /
• pp.221-226
• /
• 2002

The effects of drill widths and nitrogen application levels on the growth characteristics and seed productivity of Italian ryegrasss(Lolium multiflorum Lam.) were evaluated. The experimental design was a split-plot arrangement with three replications. The main-plots were three drill widths of 15, 30 and 45cm, and subplots were three nitrogen application rates of 50, 75 and 100 kg/㏊ in early spring. Among the growth characteristics, lodging tolerance appeared to be highest in the treatment including 45cm of drill width and 50kg/㏊ of nitrogen application compared to other treatments. The numbers of stem per one square meter tended to be increased more in drill width of 15cm than in that of 30 or 45cm, but other growth characteristics were similar among treatments. In seed yield components, the numbers of spike per one square meter were getting increased according as drill width was narrower, but spike length and 1,000 seed weight were longer and heavier. respectively. The rate of ripened pains was highest in treatment including 30cm of drill width and 50kg/㏊ of nitrogen application. Maximum seed yield was also obtained in same treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.324-329
• /
• 1998

To investigate the changes of $NH_4-N$ in soil, nitrogen uptake by rice plant, nitrogen use efficiency and rice yield by the application of Latex Coated Urea(LCU) on direct seeding rice, rice was planted on paddy field, Jeonbuk series at the Honam area, from 1996 to 1997. Nitrogen in LCU applied as basal dressing in whole layer was dissolved almost untill non-productive stage. Thus, nitrogen deficiency symptom appeared and N in shoot was 1.75% showing 28.1 of SPAD value at heading stage. However percentage recovery of fertilizer N was higher in LCU than with urea application. Top dressing of urea at panicle initiation stage in addition to basal dressing of LCU, increased rice yield by 9%. Conventional split application of urea on the surface decreased the percentage recovery of fertilizer N to 56.9% of whole layer application plot.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.399-407
• /
• 2013

Organic grape was generally produced in rainshield or plastic greenhouse culture while most of fruits were produced in open field. But little attention has been given to soil properties with different culture facilities in organic grape cultivation. This study was conducted to investigate soil physico-chemical properties of organic grapes farms with different culture facilities and soil management practices. Organic fertilizer was main resource to manage soil at organic grapes farms. Organic grapes farms were applied with total amount of organic fertilizer at one time, either at basal or additional fertilization, whereas conventional grapes farms applied with split fertilization. Bulk density and penetration resistance of soil were lower at both rainshield and green manure-applied plastic greenhouse cultures than those at clean plastic greenhouse culture. Especially, in plastic greenhouse, sod culture with natural weed after green manure application was more effective than general sod culture in improving physical properties of the rhizosphere. The contents of organic matter, available phosphate and exchangeable potassium tended to increase in the soils applied with green manure, and the difference of soil chemical properties were significant between rainshield and plastic greenhouse cultures. The optimum soil management was required in plastic greenhouse because pH, available phosphate and exchangeable cations reached over optimum range. Consequently, the ground cover management is the key factor to affect the chemical properties as well as soil physical properties extensively in plastic greenhouse. It is found that sod culture with natural weed after green manure application resulted in enhancement of utilization efficiency of nitrogen, phosphoric acid and potassium in soil in comparison with general sod culture.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.2
• /
• pp.107-114
• /
• 2003

Growth characteristics and seed productivities of orchardgrass "Hwabsung 2 Ho" cultivated for seed production were examined in the NLRI from 2000 to 2002. The experimental design was a split-plot arrangement with three replications. The main-plots were three drill widths of 15, 30 and 45cm, and subplots were four nitrogen application levels of 45, 90, 135 and 180kg/ha in early spring. Lodging was less in 45cm of drill width than in 15 and 30cm and was not severe by 90kg per ha of nitrogen including 45cm of drill width. Number of panicles per $1\m^2$ was tended to be more in 15cm of drill width than in 30 or 45cm. Among 45cm of drill widths. 45kg per ha of nitrogen had most numerous panicles. Panicle length, number of 1st branch, weight of 1,000 grain, and germination of 30 or 45cm of drill width showed better characters than that of 15cm. Seed yield was not statistical different among the treatments but was some more in 30cm of drill width, and was tended not to be different among nitrogen levels. Therefore, considering lodging tolerances, seed yield components, and mechanizations, treatment with 45cm of drill width including 45kg per ha of nitrogen in early spring was better than other treatments for orchardgrass seed production.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.66-73
• /
• 2017

In this work, graphene platelets were introduced into wax in an automotive electronic controlled thermostat for the purpose of enhancing its thermal-conductive property and improving response performance. Graphene content ranging from 10 % to 20% was added into and mixed with the wax to investigate the effect of graphene amounts on the performance of an automotive electronic controlled thermostat in terms of response time, hysteresis and melting temperature. The experimental results revealed that graphene in wax contributed to a reduction in the response time and hysteresis of an automotive electronic controlled thermostat. As a consequence, important improvement in thermal sensitivity, full lift, melting temperature and hysteresis were obtained. The thermal response of wax with graphene content of 20 % was improved by 25 %, as compared to that of wax with Cu content of 20 %. Hysteresis of wax with graphene was reduced by $0.6^{\circ}C$ as compared to that of wax with Cu content. The melting temperature of wax is lowered and hysteresis is also improved with increased graphene content of wax in an electronic controlled thermostat. We hope that this study can help further the transition of nano-fluid technology from small-scale research laboratories to industrial application in the automotive sector.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.15-37
• /
• 2013

Split digital printing into interior and outdoors on present advertisement. When is printing machine for interior mainly, use ink of water-based type. Equipment of this type embodies high resolution, but ink special quality light stability is weak. Also, when is printing machine for outdoors, printing machines of solvent or UV type are used because of water resistance and light stability. This printing machines hard to embody ink special quality high resolution mainly. And because outside is far visibility range, is uncommon in case high resolution requires embodiment. Therefore, high resolution of inside is water-based type considering this item and outside printing machine of low resolution solvent type mainly announce. Also, divide into eco-friendly latex ink type that is announced to water-based, solvent, UV according to ink type and the latest market using in occasion of digital printing machine used as advertisement industry. Color management that is been consistent of original image has a lot of difficulties by using substrate that is also various to digital printing machine for such various advertisement. But, consumers is rising realization about color or desire about quality improvement of color gradually in interior outside advertisement market. So, require solution method. Therefore, in this paper, eco-friendly ink use applied device calibration through linearization in done latex digital printing machine to basis. And studied right color management plan of digital printing for interior outside advertisement through three steps such as G7 calibration application and ICC profile application.

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.90-97
• /
• 2018

Objective: The aim of this study was to assess the analgesic effect of a single application of low-level laser therapy (LLLT) on spontaneous pain and pain on chewing after placement of initial archwires. Methods: Forty-two patients (26 women, 16 men) were randomly recruited for this split-mouth randomized clinical trial. Each patient received super-elastic nickel-titanium (NiTi) initial archwires (0.012, 0.014, 0.016, and 0.018-inch [in]) in the maxilla for leveling and alignment for an interval of 4 weeks between archwires. One side of the mouth was randomly designated as experimental, while the other side served as placebo. After insertion of each archwire, the experimental side was irradiated with a diode laser for 3 seconds each on 5 points facially and palatally per tooth, from the central incisor to first molar. On the placebo side, the laser device was held the same way but without laser application. A numerical rating scale was used to assess the intensity of spontaneous and masticatory pain for the following 7 days. The Mann-Whitney U test was used to compare pain scores between sides. Results: Patients in the LLLT group exhibited significantly lower mean scores for spontaneous pain after insertion of the initial two archwires (0.012-in and 0.014-in NiTi; p < 0.05), while there was no significant difference for 0.016-in and 0.018-in wires between the LLLT and placebo groups. LLLT significantly reduced chewing pain scores (p < 0.05) for all archwires. Conclusions: A single dose of LLLT considerably lessened postoperative pain accompanying the placement of super-elastic NiTi wires for initial alignment and leveling.

• Korean Journal Plant Pathology
• /
• v.14 no.3
• /
• pp.253-259
• /
• 1998

Effects of soil disinfection, fungicide application, and narrow ridge cultivation on ginger rhizome rot development were examined in two naturally-infested fields at Seosan, Choongnam province. Soil disinfection treatments were assigned to main plots, and fungicide and ridge treatments to sub-plots in a split plot design with three replications. The rhizome rot started in late July, and progressed rapidly until late September with the peak incidence in mid-august to early September. Soil disinfection by dazomet application showed the most prominent inhibition effects in both fields, where the disease was reduced by the treatment from 17.5% to 4.8% in one field, and from 51.0% to 2.2% in the other field. Three to five applications of fungicide metalaxyl-copper during the growing season inhibited the disease by 89.7% in one field, but less effectively in the other field. Narrow ridge cultivation reduced the disease effectively by 78.1% and 63.9%, compared to the unridged control plots in each field, respectively. Germination rate of seed-rhizomes and growth of ginger plants were similar between treatments, except when the plots received improper aeration after applying dazomet, and then the germination rate was significantly reduced. The greatest yields were obtained in the disinfected plots, regardless of rhizome rot incidence, except one control plot with very little disease. Ginger yield was negatively correlated with disease severity. However, the yield of ridge plots averaged 58∼59% compared to those of the unridged plots, due mainly to the half planting rate of the ridge plots. In spatial progress, the disease in the disinfected plots started from a single focus of the inoculum, and spread into the adjacent areas only, whereas in the untreated plots, the disease started from many foci that were distributed over the plot, and rapidly progressed to make an epidemic during the season. The soil density of P. myriotylum in the disinfected plots was not changed or, if not, increased slightly during the season. However, in the untreated plots it increased rapidly to reach the density 3 to 5 times greater by the end of the season.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.3
• /
• pp.217-221
• /
• 1987

Two trial products of monogranular compound fertilizer for red pepper under vinyl mulching cultivatin were made using the principal sources of urea, diammonium phosphate and muriate of potash in combination with fillers of treated human wastes (product I) and zeolite (Product II). A field experiment was carried out to evaluate their effects on red pepper and the results obtained were as follows. Red pepper plant growth and total red fruit yields in the trial products of one time basal application were better and higher than those of NPK split application of contrl plot. The increases of yield in the trial products might be due to steady supply of nutrients for the entire growing period. Therefore, one time basal dressing of a developed monogranular compound fertilizer for red pepper was applicable under vinyl mulching cultivation.

• Journal of Ginseng Research
• /
• v.46 no.2
• /
• pp.296-303
• /
• 2022

Background: Skin microbiota is important for maintenance of skin homeostasis; however, its disturbance may cause an increase in pathogenic microorganisms. Therefore, we aimed to develop a red ginseng formulation that can selectively promote beneficial bacteria. Methods: The effects of red ginseng formulation on microorganism growth were analyzed by comparing the growth rates of Staphylococcus aureus, S. epidermidis, and Cutibacterium acnes. Various preservatives mixed with red ginseng formulation were evaluated to determine the ideal composition for selective growth promotion of S. epidermidis. Red ginseng formulation with selected preservative was loaded into a biocompatible polymer mixture and applied to the faces of 20 female subjects in the clinical trial to observe changes in the skin microbiome. Results: Red ginseng formulation promoted the growth of S. aureus and S. epidermidis compared to fructooligosaccharide. When 1,2-hexanediol was applied with red ginseng formulation, only S. epidermidis showed selective growth. The analysis of the release rates of ginsenoside-Rg1 and -Re revealed that the exact content of Pluronic F-127 was around 11%. The application of hydrogel resulted in a decrease in C. acnes in all subjects. In subjects with low levels of S. epidermidis, the distribution of S. epidermidis was significantly increased with the application of hydrogel formulation and total microbial species of subjects decreased by 50% during the clinical trial. Conclusion: We confirmed that red ginseng formulation with 1,2-hexanediol can help maintain skin homeostasis through improvement of skin microbiome.