• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.3
• /
• pp.181-190
• /
• 2019

Active power decoupling circuits have emerged to eliminate the inherent second-order ripple power in a single-phase power conversion system. This study proposes a design method to determine the optimal capacitance for active power decoupling circuits to achieve high power density. Minimum capacitance is derived by analyzing ripple power in a passive power decoupling circuit, a buck-type circuit, and a capacitor-split-type circuit. Double-frequency ripple power decoupling capabilities are also analyzed in three decoupling circuits under a 3.3 kW load condition for a battery charger application. To verify the proposed design method, the performance of the three decoupling circuits with the derived minimum capacitance is compared and analyzed through the results of MATLAB -Simulink and hardware-in-the-loop simulations.

• Journal of Digestive Cancer Research
• /
• v.11 no.3
• /
• pp.157-164
• /
• 2023

Prediction is a significant topic in clinical research. The development and validation of a prediction model has been increasingly published in clinical research. In this review, we investigated analytical methods and validation schemes for a clinical prediction model used in digestive cancer research. Deep learning and logistic regression, with split-sample validation as an internal or external validation, were the most commonly used methods. Furthermore, we briefly introduced and summarized the advantages and disadvantages of each method. Finally, we discussed several points to consider when conducting prediction model studies.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.174-179
• /
• 2013

This paper presents a capacitor loaded tunable bandpass chip filter using multiple split ring resonators (MSRRs) with two transmission zeros. To obtain high selectivity and minimize the chip size, asymmetric feed lines are adopted to make a pair of transmission zeros located on each side of passband. Compared with conventional filters using cross-coupling or source-load coupling techniques, the proposed filter uses only two resonators to achieve high selectivity through a pair of transmission zeros. In order to optimize selectivity and sensitivity (insertion loss) of the filter, the effect of the position of asymmetric feed line on transmission zeros and insertion loss is analyzed. The SOI-CMOS switched capacitor composed of metal-insulator-metal (MIM) capacitor and stacked-FETs is loaded at outer rings of MSRRs to tune passband frequency and handle high power signal up to +30 dBm. By turning on or off the gate of the transistors, the passband frequency can be shifted from 4GH to 5GHz. The proposed on-chip filter is implemented in 0.18-${\mu}m$ SOI CMOS technology that makes it possible to integrate high-Q passive devices and stacked-FETs. The designed filter shows miniaturized size of only $4mm{\times}2mm$ (i.e., $0.177{\lambda}g{\times}0.088{\lambda}g$), where ${\lambda}g$ denotes the guided wave length of the $50{\Omega}$ microstrip line at center frequency. The measured insertion loss (S21)is about 5.1dB and 6.9dB at 5.4GHz and 4.5GHz, respectively. The designed filter shows out-of-band rejection greater than 20dB at 500MHz offset from center frequency.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.698-703
• /
• 1996

To elucidate the proper nitrogen application method for machine transplanting of rice infant seedling in no-tilled paddy, Dongjinbyeo was used and nitrogen was applied five methods including conventional application method. Leaf color was darker at 80% of total nitrogen was applied as basal and lighter at 20% of total nitrogen was reduced than conventional application method in tillering stage, but wasn't significantly different after panicle formation stage among the application method. And it was thinner at tillering stage and was darker after panicle formation stage in no-tilled paddy compared with tilled paddy. Tiller number, LAI and top dry weight were more at 80% of total nitrogen was ap-plied as basal than conventional application method, and more in tilled paddy than no-tilled one at tillering stage, but at heading stage they were highest at top dressing applied 25 days after transplanting. C.G.R was highest at top dressing for tillering was delayed and it was lower in no-tilled paddy at tillering stage but was higher after panicle formation stage than in tilled one. Yield was highest at top dressing time was delayed among nitrogen application method, but wasn't significantly different between tilled method in same nitrogen application method.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.1
• /
• pp.71-80
• /
• 2004

This study was conducted to investigate the effects of the type and application season of animal manure (AM) on herbage productivity, efficiency of nitrogen utilization in mixed grassland. Main plots were the types of AM, such as cattle feedrot manure (CFM), swine manure fermented with sawdust (SMFWS) and cattle slurry (CS). Subplots were the seasons of AM application. such as application in autumn or in spring as single dressing. and application in autumn and spring as a 50:50 split dressing. The results obtained where summarized as follows ; 1. Herbage productivity and nutritive value were hardly influenced by type and application season of AM. 2. Nitrogen efficiency of CFM and CS was lower than that of SMFWS. 3. Organic matter (OM) content in the soil was not significantly different by the type and application season of AM. OM content among AM treatments was the highest with CFM and the lowest with CS. 4. Nitrogen content of the soil was hardly influenced by the type and application season of AM and not affected by the interaction between the type and application season of AM.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.1-10
• /
• 2010

There have been studied with activity about color standard due to extention of digital contents' application area. Therefore the studies in relation to the standard are needed to represent image's feature as color. Also the methods to extract color's feature to be apt to various application are needed. In this paper, we set the base color as 50 colors from Munsell color system, get the color histogram to show the characteristics of colors's distribution of a image, and propose the method to extract representative colors from the histogram. Firstly, we convert a input image of RGB color space to a image of HSI color space and split the image into hue area and non-hue area. To split hue area and non-hue area, we use a fixed threshold and a perception-function of color area function to reflect the subjective vision of human-being. We compute histograms from each area and then make a total histogram from the histogram of hue area and the histogram of hue area, and extract the representative colors from the histogram. To evaluate the proposed method, we made 18 test images, applied conventional methods and proposed method to them Also the methods are applied to public images and the results are analyzed. The proposed method represents well the characteristics of the colors' distribution of images and piles up colors' frequency to representative colors. Therefore the representative colors can be applied to various applications

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.4
• /
• pp.289-295
• /
• 2001

Experiments were conducted to find out the optimum level of slow release N fertilizers when total amounts of nitrogen required throughout the growing season in paddy were applied in the soil of seedling box. To evaluate the emergence rate and growth of rice seedlings, five levels of Meister (MS) 10, MS S10, and latex coated urea (LCU) which are equivalent to 0, 40, 60, 80, and 100kg N h $a^{-l}$ were mixed in soil of the seedling box. Emergence rate differed depending on the fertilizers and N levels; in MS 10 plots the emergence rate was 40.8% at 40kg N h $a^{-l}$ and no seedlings were emerged at the higher levels, in MS S10 plots higher than 80% at all the N levels, and decreased with the N levels from 70.0% at 40 kg N h $a^{-l}$ to 59.5% at 100kg N h $a^{-l}$ of LCU. Seedling started to wilt at 40 kg N h $a^{-l}$ of MS 10 and 80 and 100 kg N h $a^{-l}$ N of LCU on the 8th day after sowing, while seedling growth was normal at all the levels of MS S10. Field performance of rice was evaluated at the 0, 30, 60, 90, 120kg N h $a^{-l}$ of MS S10 applied in the soil of seedling box and N was not applied in paddy. Grain yield at 90 and 120kg N h $a^{-l}$ of MS S10 was similar to conventional urea split application (120 kg N h $a^{-l}$), but significantly higher compared to 30 and 60kg N h $a^{-l}$ of MS S10. Fertilizer N recovery decreased with N levels and the N recovery at 90 kg N h $a^{-l}$ of MS S10 and conventional urea split application were 62.2 % and 44.2%, respectively, with similar grain yield. The optimum level of MS S10 to be applied in seedling box seems to be about 90 kg N h $a^{-l}$ considering grain yield, price of fertilizer, labor applying fertilizer, and fertilizer N recovery.d fertilizer N recovery.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.783-798
• /
• 2004

An e-business client application in ubiquitous mobile computing environment may become disconnected from the enterprise server due to broken communication connections caused by the limitation of mobile computing environments(limited battery life of the mobile device, low bandwidth communication, incomplete wireless communication infrastructure, etc). It Is even Possible that mobile client application Intentionally operates in disconnected mode to reduce communication cost and the power consumption of the mobile device. We use “data hoarding” as a means of providing local autonomy to allow transactions to be processed and committed on the mobile host despite of disconnection. The key problem to this approach is the synchronization problem that serialize potentially conflicting updates from disconnected clients on master objects of the server database. In this paper, we present a new transaction synchronizing method that splits a transaction into a set of independent component transactions and give the synchronization priority on each component taking the possibility of use and conflicts in the server into consideration. Synchronization is performed component by component based un synchronization priority. After the Preferred component of a no bile transaction succeeds in synchronization with the server, the mobile transaction can pre-commit at server. A pre-committed transaction's updated value is made visible at server before the final commit of the transaction. The synchronization of the component with low synchronization priority can be delayed in adaption to wireless bandwidth and computing resources. As a result, the availability of important data updated by mobile client is increased and it can maximize the utilization of the limited wireless bandwidth and computing resources.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.340-348
• /
• 2015

Mowing turfgrasses, especially fast growing species like perennial ryegrass, is one of the most time and money consuming tasks of their management. Trinexapac-ethyl (TE) is a popular plant growth regulator used to reduce mowing requirements, improve stress tolerance, and enhance turf quality. This study was conducted to investigate the effect of TE rate and frequency of applications on growth response and traffic tolerance of perennial ryegrass. The experiment was a split-plot laid out in a randomized complete block (RCB) design with three replications. TE was applied to main plots at 0.00, 0.25, and $0.50kg\;a.i.\;ha^{-1}$. Application pattern included an initial application, followed by two sequential applications at 6-wk intervals. Traffic treatment was applied to subplots with a cleated roller. Results demonstrated that TE consistently reduced vertical shoot growth, clippings dry weight, with maximum growth reduction of 59% and 65%, for 0.25 and $0.50kg\;a.i.\;ha^{-1}$, respectively, occurring at 2 weeks after initial TE treatment (WAT). Traffic also dramatically reduced vertical shoot growth and clippings dry weight. Overall, quality of perennial ryegrass was enhanced by sequential TE applications, however, turf quality and surface coverage reduced greatly under traffic, regardless of TE treatment. Total chlorophyll, chlorophyll a and chlorophyll b and total carbohydrates (TC) contents were also positively influenced following sequential TE application. Our results indicated that TE reduces mowing frequency and enhances turf quality rather than influencing traffic resistance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.208-219
• /
• 2001

To study the effect of dentin permeability on a tooth with wear from tooth brushing after application of desensitizing agent, extracted teeth free from caries were chosen. Coronal dentin discs with thickness of 1mm were prepared. Using the split chamber device developed by Pashely, hydraulic conductance, scanning electron microscope images(SEM) and atomic force microscope images(AFM) were compared and contrasted before and immediately after the application of desensitizing agent and after equivalent tooth brushing of 1 week, 2 weeks, and 6 weeks. Four commercially available desensitizing agents were used in this study ; they were Gluma, Seal & Protect, All-Bond 2 and MS Coat. The results of this study are as follows. 1. On all specimens, the hydraulic conductance decreased after the application of tooth desensitizing agent. 2. Except the specimens treated with MS Coat, the remaining specimens had an increase in dentin permeability after tooth brushing for 1 and 2 weeks but a decrease after 6 weeks. 3. The specimens treated with MS Coat had statistically significant increase in the dentin permeability regardless with the duration of tooth brushing. 4. On examination of SEM and AFM, the dentinal tubule diameter had decreased after treatment of desensitizing agents. The specimens other than those treated with MS Coat, smear layers were noted after tooth brushing. It is not always consistant but the hydraulic conductance correlated with the images from SEM and AFM.