• 제목/요약/키워드: split line

검색결과 172건 처리시간 0.031초

Three-dimensional evaluation of lingual split line after bilateral sagittal split osteotomy in asymmetric prognathism

  • Song, Jae Min;Kim, Yong Deok
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제40권1호
    • /
    • pp.11-16
    • /
    • 2014
  • Objectives: The aim of this study was to evaluate the pattern of lingual split line when performing a bilateral sagittal split osteotomy (BSSO) for asymmetric prognathism. This was accomplished with the use of cone-beam computed tomography (CBCT) and three-dimensional (3D) software program. Materials and Methods: The study group was comprised of 40 patients (20 males and 20 females) with asymmetric prognathism, who underwent BSSO (80 splits; n=80) from January 2012 through June 2013. We observed the pattern of lingual split line using CBCT data and image analysis program. The deviated side was compared to the contralateral side in each patient. To analyze the contributing factors to the split pattern, we observed the position of the lateral cortical bone cut end and measured the thickness of the ramus that surrounds the mandibular lingula. Results: The lingual split patterns were classified into five types. The true "Hunsuck" line was 60.00% (n=48), and the bad split was 7.50% (n=6). Ramal thickness surrounding the lingual was $5.55{\pm}1.07$ mm (deviated) and $5.66{\pm}1.34$ mm (contralateral) (P =0.409). The position of the lateral cortical bone cut end was classified into three types: A, lingual; B, inferior; C, buccal. Type A comprised 66.25% (n=53), Type B comprised 22.50% (n=18), and Type C comprised 11.25% (n=9). Conclusion: In asymmetric prognathism patients, there were no differences in the ramal thickness between the deviated side and the contralateral side. Furthermore, no differences were found in the lingual split pattern. The lingual split pattern correlated with the position of the lateral cortical bone cut end. In addition, the 3D-CT reformation was a useful tool for evaluating the surgical results of BSSO of the mandible.

Varactor-Loaded Split-Ring Resonator(VLSRR) 기반의 가변 Metamaterial 전송 선로를 이용한 광대역 전압 제어 발진기 (Broadband VCO Using Electronically Controlled Metamaterial Transmission Line Based on Varactor-Loaded Split-Ring Resonator)

  • 최재원;서철헌
    • 대한전자공학회논문지TC
    • /
    • 제44권11호
    • /
    • pp.54-59
    • /
    • 2007
  • 본 논문에서는 varactor-loaded split-ring resonator (VLSRR)를 기반으로 한 가변 metamaterial 전송 선로를 이용한 광대역 전압 제어 발진기를 제안하였다. 우선, 마이크로스트립 라인에 결합된 VLSRR이 주파수 조절 특성을 갖는 metamaterial 전송선로를 만들 수 있음을 증명하였다. 음의 유효 투자율은 VLSRR에 의해 공진 주파수 상에서 협대역으로 얻어지는데, 버랙터 다이오드들의 연결을 통해 주파수가 조절될 수 있다. 1.8 V의 공급 전압을 갖는 전압 제어 발진기는 주파수 조절 범위 $5.407\;{\sim}\;5.84\;GHz$에서 $-108.84\;{\sim}\;-105.5\;dBc/Hz$ @ 100 kHz의 위상 잡음 특성을 얻는다. Power-frequency-tuning-normalized (PFTN)이라고 불리우는 figure of merit (FOM)은 20.144 dB이다.

송전 선로 극저주파 자기장 저감지수(FRF) 특성 해석 (Analysis of ELF Magnetic Field Reduction Factor of Electric Power Transmission Line)

  • 명성호;조연규;이동일;임윤석
    • 한국전자파학회논문지
    • /
    • 제17권11호
    • /
    • pp.1132-1142
    • /
    • 2006
  • 본 연구는 송전 선로 여러 가지 유형의 극저주파 자기장 저감 적용 모델을 조사하고 그 효과를 분석하였다. 본 연구에서는 154 kV 수평 배열 송전 선로를 기본으로 하여 적용 가능한 다양한 자기장 저감 모델에 대하여 적용시 얻게 되는 자기장 저감지수(Field Reduction Factor)를 검토하였다. 그 결과 compact 모델 채용시에는 상간거리 compact화 비율과 자기장 저감지수가 거의 비례하였으며, diamond 모델 및 transposed 선로 배치의 경우는 50 %에 근접한 자기장 저감이 가능하였다. 배전 선로에 적용이 가능한 삼각형 배열은 33 % 정도, 2회선 split는 50 % 정도 저감 효과가 나타나는 것으로 분석되었으며 수평 multi split 모델의 경우는 80 %까지 자기장 저감을 얻을 수 있었다.

산란계 사료의 오전, 오후 분리 급여 효과 (Effect of Split Diets on Laying Performance and Egg Quality in Layers)

  • 이상진;김상호;강보석
    • 한국가금학회지
    • /
    • 제25권2호
    • /
    • pp.71-77
    • /
    • 1998
  • This study was investigated to study split diets on laying performance and eggshell quality with Hy-Line brown layers 43 weeks old for 12 weeks Layers fed a conventional diet and split diets were divided into morning and afternoon diet. The conventional diet contained 3.4 % Ca was given constant nutrients all day. Hens of the split diets fed morning diets contained 0.5 % Ca constantly and afternoon diets contained 5.9, 8.0, and 10.0 % Ca in T1to T3. Split diets were given morning diets from 04:00 to 15:00 and afternoon diets 15:00 to 21 :00 alternately. Egg production, egg weight, and egg mass were not significantly different among diets. Abnormal eggs decreased in T1 and T2, but no significantly differed(P>0.05). Feed intake decreased in all of split diets compared to control diets (P <0.05). So, feed conversion ratio also improved in split diets(P<0.05). ME and CP intake decreased in T2 and T3, and Ca intake increased in proportion to Ca content of diets(P<0.05). ME and CP requirements per kg eggs decreased in the split diets, and that of Ca increased. Although there were not different significantly, egg shell strength and thickness improved slightly in T2 at 12 week. Yolk color, haugh unit and yolk index were not different among diets. Therefore, we concluded that split diet feeding to layer could improve feed and economic efficiency with normal egg production.

  • PDF

신체치수와 제품치수의 차이로 본 타이트 스커트의 구성 실태분석 (An Analysis to the Actual Condition of Tight Skirts Construction According to the Difference Between Body Size and Products Size)

  • 정옥임
    • 대한가정학회지
    • /
    • 제38권1호
    • /
    • pp.1-8
    • /
    • 2000
  • In this study 61private brand skirts and 67 brand name skirts were compared to see if the skirts from the different markets were suitable for both comfort and movement. The researcher chose size 66 skirts with a waist circumference of 68~70cm and hip circumference of 92cm. The resets are as follows. (1) In the waist measurement, the minor brand skirts were made at the maximum measurement (70cm) and the department store brand skirts were at the minimum (68cm). (2) Compared with the standard back split length of 9cm for a 48cm-long skirt, the minor brand skirts had a split of only 4.5cm, while the department store brand skirts were 3cm less (split length-6cm). From this result, we see that both of them are less practical than they are supposed to be (3) For the department store skirts, the hip circumference and waist circumference show a significant correlation to skirt length (p<0.05) and back split length (p<0.001). Larger waist & hip measurements equal longer split length. For the minor brand skirts, the length of the split shows a significant correlation to the depth of the hem-line Shorter split equals smaller hem depth. From these results, it can be concluded that the two groups of skirts do not differ except for back split length and waist circumference, but regarding the split length, both of them should be modified for else of movement and comfort.

  • PDF

Split-Ring 공진기와 Spiral 공진기를 이용한 새로운 소형의 마이크로스트립 대역 저지 필터 설계 (A Design of Novel Compact Microstrip Bandstop Filters Based on Split-Ring Resonators and Spiral Resonators)

  • 이종혁;오영철;명로훈
    • 한국전자파학회논문지
    • /
    • 제18권7호
    • /
    • pp.796-808
    • /
    • 2007
  • 이 논문에서는 split-ring 공진기와 spiral 공진기를 complementary 형태로 구현한 새로운 형태의 두 가지 마이크로스트립 대역저지 필터를 제안하였다. 첫 번째는 마이크로스트립 전송 선로의 중앙 선로에 세 개의 split-ring 공진기를 일렬로 배열시켜 에칭 시킨 것이다. 중앙 선로에 구현된 세 개의 split-ring 공진기와 수직으로 시간에 따라 변하는 전계가 걸리면 특정 공진 주파수에서 유효 투자율이 음이 되는 현상이 벌어지며, 이에 따라 전파가 더 이상 진행하지 못하게 된다. 이는 특정 공진 주파수에서 대역저지 현상이 나타나는 것을 의미한다. 두 번째는 첫 번째 것과 비슷하게 마이크로스트립의 중앙 선로에 spiral 공진기를 세 개 나열하여 에칭하였다. Spiral 공진기는 그 축에 수직한 방향으로 전계가 걸렸을 때 특정 공진 주파수에서 self-resonance 현상이 일어나며, 이것이 대역저지 특성으로 나타난다. 제안된 두 필터는 쉽게 공진 주파수와 대역저지 폭을 결정할 수 있고, 매우 작은 크기를 갖으며, 통과대역 내에서 삽입손실이 거의 없으며, 매우 날카로운 스커트 특성을 갖는다. 또한 제작하기 쉽고, 향후 MMIC에 적용하기 쉬울 것으로 예상한다.

S-파라미터 변환을 통한 비대칭 분배되는 임피던스 변환기 (An Impedance Transformer with Unequal Split Based on S-Parameter Conversion)

  • 김영
    • 한국항행학회논문지
    • /
    • 제20권4호
    • /
    • pp.361-366
    • /
    • 2016
  • 본 논문은 S-파라미터를 어드미턴스 파라미터로 변환하는 것을 바탕으로 비대칭 분배되면서 동시에 임의의 임피던스로 변환시킬 수 있는 임피던스 변환기를 나타내었다. 회로 해석 방법을 우수/ 기수 모드 방법과 비교하면 본 논문의 파라미터 변환을 통한 방법은 위상 지연 정보와 임의의 포트 임피던스 값을 포함시키고 그리고 비대칭 구조등을 해석하는데 간단함을 알 수 있다. 이 설계 방법의 타당성을 확인하기 위해서 중심주파수 1 GHz에서 3:1의 비대칭 분배비율을 갖고 있고 $50{\Omega}$$12.5{\Omega}$ 비율로 변환되는 임피던스 변환기를 설계하였다. 임피던스 변환기를 구현하는 방법은 유도된 수식으로부터 계산된 작은 임피던스 선로를 병렬 오픈스터브가 연결된 전송선로를 사용하여 구현하였고, 이것의 실험 결과는 시뮬레이션 결과와 동일하게 나옴을 확인하였다.

현장측정을 통한 기존 분기기용 목침목과 개량 분기기 부절침목의 동적거동 비교평가 (Dynamic Behavior Evaluation for Split PC sleeper using the Field Test)

  • 엄주환;이창훈;엄기영
    • 한국철도학회논문집
    • /
    • 제9권6호
    • /
    • pp.746-752
    • /
    • 2006
  • The major objective of this study is to investigate the dynamic behavior evaluation of split PC sleepers for railway turnout by the field test. In railway engineering, a turnout is necessary to allow a vehicle to move from one track to another. So, turnout is required very complex railway technologies such as lolling stock, track. In reference to conventional line speed-up and improvement railway, accurate assembly of turnout affects travel ins qualify of turnout area and running safety. Because of heavy weight and a large volume of the long sleeper used to turnout and car limit, transport and the prerequisite for trouble-free transport of the factory pre-assembled major turnout components is achieved through division of long sleepers. The one of the advantages for using a split sleeper is to reduce the dynamic vibration according to the information of developed nations. Therefore, we investigate the characteristic of dynamic behaviors of split sleepers which are adopted for the first time to improve performance of turnout From the field test results of the split sleeper, it is evaluated that the modification of weight, material and stiffness compared with wood sleeper is very effective for the ballast safety. However, the decrease in vibration of split sleeper was not found out.

강재 가스배관용 분기티의 개발 연구 (Development of Split Tees for Gas Steel Pipelines)

  • 김영규;노오선;김지윤
    • 한국가스학회지
    • /
    • 제4권4호
    • /
    • pp.6-12
    • /
    • 2000
  • 본 연구에서는 강재 가스배관의 가스공급 중단과 가스압력의 손실이 없는 상태에서 효과적으로 분기가 가능한 분기티를 개발하였다. 본 분기티는 배관의 분기위치를 고려하여 설계하였고, 기존 분기티의 문제점인 매설배관의 심도유지가 가능해졌다 개발된 분기티는 시험결과 기밀성, 내압성, 밀폐성, 용접성, 굽힘성, 내가스성의 성능특성이 우수한 것으로 평가되었다. 본 연구결과를 통한 분기티의 적용은 비용절감과 작업시간 단축뿐만 아니라 현장 피복이 용이하다는 장점을 제공할 수 있을 것이다.

  • PDF

Diagnosis of split fractures of the mandible in adults

  • Taesik Kim;Sung Gyun Jung;In Pyo Hong;Young Joong Hwang
    • 대한두개안면성형외과학회지
    • /
    • 제24권4호
    • /
    • pp.167-173
    • /
    • 2023
  • Background: Mandibular split fractures, in which the fracture occurs exclusively in the posterior wall, are uncommon. This study aimed to enhance clinicians' understanding of mandibular split fractures and offer insights for future research. Methods: This study included six patients who visited our hospital between January 2020 and June 2023 and were diagnosed with mandibular split fractures. We retrospectively collected data from patients' medical records on their age, sex, symptoms, mechanism, impact site, associated injuries, and treatment method, as well as the location, pattern, and number of fractures observed on computed tomography (CT) and panoramic images. The frequency of split fractures among all mandibular fractures was calculated. Results: The six patients included three men (50%) and three women (50%), ranging in age from 20 to 71 years (mean age, 49.8 years). The split fractures were located in the symphysis in one patient (16.7%), symphysis to parasymphysis in two patients (33.3%), parasymphysis in one patient (16.7%), and parasymphysis to the body in two patients (33.3%). Four patients (66.7%) had condylar head fractures, while two patients (33.3%) had single split fractures. The mechanism of trauma was a slip-down incident in four cases (66.7%), while two cases (33.3%) were caused by motorcycle traffic accidents. Four patients (67%) underwent intermaxillary fixation, while two patients (33%) improved with conservative treatment. Split fractures were diagnosed in all six patients on CT, whereas the fracture line was not clearly visible on panoramic images. Mandibular split fractures accounted for 5.6% of all mandibular fractures. Conclusion: This study provides insights into the clinical characteristics of rare mandibular split fractures and the diagnostic imaging findings. Furthermore, CT scans and three-dimensional image synthesis-instead of panoramic images-may be essential for accurately diagnosing mandibular fractures, including mandibular split fractures, in the future.