• Journal of Korean Neurosurgical Society
• /
• 제52권6호
• /
• pp.541-546
• /
• 2012

Objective : The prefabrication of customized cranioplastic implants has been introduced to overcome the difficulties of intra-operative implant molding. The authors present a new technique, which consists of the prefabrication of implant molds using three-dimensional (3D) printers and polymethyl-methacrylate (PMMA) casting. Methods : A total of 16 patients with large skull defects (>100 $cm^2$) underwent cranioplasty between November 2009 and April 2011. For unilateral cranial defects, 3D images of the skull were obtained from preoperative axial 1-mm spiral computed tomography (CT) scans. The image of the implant was generated by a digital subtraction mirror-imaging process using the normal side of the cranium as a model. For bilateral cranial defects, precraniectomy routine spiral CT scan data were merged with postcraniectomy 3D CT images following a smoothing process. Prefabrication of the mold was performed by the 3D printer. Intraoperatively, the PMMA implant was created with the prefabricated mold, and fit into the cranial defect. Results : The median operation time was $184.36{\pm}26.07$ minutes. Postoperative CT scans showed excellent restoration of the symmetrical contours and curvature of the cranium in all cases. The median follow-up period was 23 months (range, 14-28 months). Postoperative infection was developed in one case (6.2%) who had an open wound defect previously. Conclusion : Customized cranioplasty PMMA implants using 3D printer may be a useful technique for the reconstruction of various cranial defects.

• Restorative Dentistry and Endodontics
• /
• 제14권2호
• /
• pp.49-64
• /
• 1989

The purpose of this study was to evaluate the effect of several materials on the healing process of apical wound. Sixteen mandibular premolars obtained from 4 healthy dogs were used for this study. Under general anesthesia, the pulpal chamber of each tooth was opened and the pulps were extirpated. The root canals were then instrumented with H-file and irrigated with physiologic saline solution ; the apices were purposely perforated and enlarged with the engine K-reamer. In the experimental groups, apical wounds were filled with one of calcium hydroxide, hydroxylapatite, and tricalcium phosphate materials, mixture of each materials and physiologic saline solution, with a lentulo spiral. In the control group, apical wounds were not filled with any material. All the root canals were filled by the lateral condensation technique with gutta-percha cone and ZOE sealer. The access opening of all the teeth were closed with amalgam. On the 10, 20, 40 and 60th day after experiment, experimental animals were sacrificed. Segments of jaws, each containing one tooth, were fixed in 10% formalin solution and decalcified in Plank-Rychlo solution. The specimens were embedded in paraffin and serially sectioned to an average thickness of $6{\mu}m$. The sections were stained by hematoxylin-eosin and Masson's trichrome stain method and examined under light microscope. The results were as follows : 1. In the experimental groups, the new bone formations were observed in apical wounds. 2. Fourty days later, apical wounds were healed by granulation tissue in the experimental groups, but were not healed by granulation tissue in the control group, and the healing process of experimental groups were more rapid than that of control group. 3. Sixty days later, chronic inflammation disappeared in the experimental groups, and the materials used showed biologic affinity to the periapical tissue. 4. In all the groups, the resorption of cementum appeared on the 10th and 20th day after experiment, and the deposition of cementum appeared on the 40th and 60th day after experiment, especially showing narrowness of apical foramen due to newly formed cementum in calcium hydroxide group. 5. Calcum hydroxide and tricalcium phosphate particles were gradually resolved, but hydroxylapatite particles were not resolved through the experimental period.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.12-27
• /
• 2004

Pretreatment process consisted of submerged hollow-fiber microfiltration(HMF) membrane and spiral-wound nanofiltration(SNF) membrane has been developed by NETEC, KHNP for the purpose of improving the impurities of liquid radioactive waste before entering Selective Ion Exchange System(SIES). The lab-scale combined system was installed at Kori NPP #2 nuclear power plant and demonstration tests using actual liquid radioactive waste were carried out to verify the performance of the combined system. The submerged HMF membrane was adopted for removal of suspended solid in liquid radioactive waste and the SNF membrane was used for removal of particulate radioisotope such as, Ag-l10m and oily waste because ion exchange resin can not remove particulate radioisotopes. The liquid waste in Waste Holdup Tank (WHT) was processed with HMF and SNF membrane, and SIES. The initial SS concentration and total activity of actual waste were 38,000ppb and $1.534{\times}10_{-3}{\mu}Ci/cc$, respectively. The SS concentration and total activity of permeate were 30ppb and lower than LLD(Lower Limit of Detection), respectively.

• 멤브레인
• /
• 제12권3호
• /
• pp.165-170
• /
• 2002

씻어나온 쌀(무세미) 생산공정 중 발생하는 쌀뜨물 중 함유된 유효성분, 특히 단백질 회수를 위한 분리막 공정에 관하여 검토하였다. 먼저 dead-end형 Amicon 여과셀을 이용하여 단백질 농축에 적절한 분리막을 선정하였으며 이를 토대로 중공사형 한외여과 모듈 또는 가정용 정수기에 사용되는 나권형 나노여과 및 역삼투 모듈을 이용한 투과실험을 행하였다. 그 결과, 분획분자량이 10,000 dalton인 한외여과막은 쌀뜨물내 유효성분 내지는 단백q질을 농축하기에 적절하지 않았다. 그러나 역삼투 또는 나노여과 모듈에 9% 가량의 단백질이 함유된 원료용액을 250%까지 농축할 경우, 역삼투 모듈 농축액중에 단백질의 농도는 22%로서 약 2.4배가 농축되었으며 나노여과 모듈의 경우는 약 2배까지 단백질을 농축할 수 있었다.

• 상하수도학회지
• /
• 제30권5호
• /
• pp.553-559
• /
• 2016

There has been increasing global interest in the environmental pollution problems produced by fossil fuel consumption and greenhouse gas emissions. In order to tackle these issues, new renewable energy such as solar, wind, bio gas, fuel cell and pressure retarded osmosis(PRO) have been developed extensively. Among these energy sources, PRO is one of the salinity gradient power generation methods. In PRO, energy is obtained by the osmotic pressure generated from the concentration difference between high and low concentration solutions separated by a semipermeable membrane. The development for high power density PRO membranes is imperative with the purpose of commercialization. This study investigates development of thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on power density was identified, and the characteristic factors of PRO membranes was determined. Different backing layers were used to improve power density. As expected, the PRO membrane with more porous backing layer showed higher power density.

• 멤브레인
• /
• 제11권4호
• /
• pp.152-160
• /
• 2001

본 연구는 아크릴 폐수의 COD제거를 위한 전터리 공정 및 전 처리된 아르릴폐수를 한외여과 중공사형 모듈과 역삼투 나권형 모듈에 적용하여 적용압력과 온토변화에 따른 한외여과막과 역삼투막의 분리특성을 고찰하였다. 또한, 장시간 연속운전으로부터 한외여과 및 역삼투 막의 세척 적정시간을 결정하고, 운전시간에 따른 막오염을 고찰하였다. 14시간을 기준으로 한외여과 막의 플럭스가 급격히 떨어지고 있으며, 역삼투 막도 비슷한 경향을 나타내고 있다. CaO 및 모래여과장치를 거친 처리수를 중화처리 하여 UF/RO공정에 적용한 결과 COD 및 TDS가 배출허용 기준치 이하로 제거됨을 알 수 있었다.

• Membrane and Water Treatment
• /
• 제10권3호
• /
• pp.239-244
• /
• 2019

Plating wastewater containing various heavy metals can be produced by several industries. Specifically, we focused on the removal of copper (Cu2+) and nickel (Ni+) ions from the plating wastewater because all these ions are strictly regulated when discharged into watershed in Korea. The application of both nanofiltration (NF) and reverse osmosis (RO) technologies for the treatment of wastewater containing copper and nickel ions to reduce fresh water consumption and environmental degradation was investigated. In this work, the removal of copper (Cu2+) and nickel (Ni+) ions from synthetic water was studied on pilot scale remove by before using two commercial nanofiltration (NF) and reverse osmosis(RO) spiral-wound membrane modules (NE2521-90 and RE2521-FEN by Toray Chemical). The influence of main operating parameters such as feed concentration on the heavy metals rejection and permeate flux of both membranes, was investigated. Synthetic plating wastewater samples containing copper ($Cu^{2+}$) and nickel ($Ni^{2+}$) ions at various concentrations(1, 20, 100, 400 mg/L) were prepared and subjected to treatment by NF and RO in the pilot plant. The results showed that NF, RO process, with 98% and 99% removal for copper and nickel, respectively, could achieve high removal efficiency of the heavy metals.

• 한국식품조리과학회지
• /
• 제13권4호
• /
• pp.507-513
• /
• 1997

두부순물에 함유되어 있는 유용성 물질을 분리·농축하고자 한외여과법을 행하고 그 효율성을 분석하였다. 재생섬유소막과 polysulphone막 모두 pH가 증가할수록 막투과 속도가 감소하였고, pH 3.5에서 한외여과 효율이 가장 높게 나타났다. EDTA를 0.01 M 처리한 두부순물의 경우, 처리하지 않은 것보다 오히려 막투과 속도가 감소하였다. 또한 pH가 증가할수록 두부순물의 이온성 칼슘의 농도가 감소하여 이온성 칼슘의 농도 또한 막투과 속도에 영향을 준다고 생각되었다. Polysulphone막의 경우 용적농축비가 10일 때 COD의 막 제거계수가 79.25%, 단백질 막 제거계수가 98.42%로 나타나 정화효과와 농축액으로의 단백질 농축효과가 컸으며 , 재생섬유소막은 단백질의 막제거 계수는 polysulphone막보다 낮았으나 당을 여과액쪽으로 회수하고자 할 때 더 효율적인 것으로 나타났다. 올리고당을 여과액쪽으로 회수하고자 할 때 라피노오스와 스타키오스의 농도를 상대적으로 높이기 위해서 polysulphone막보다 재생섬유소막이 더 적당하며, 용적농축비는 4배 정도가 적합한 것으로 나타났다.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.17-21
• /
• 2018

A series of laboratory scale experiments were performed to investigate the feasibility of membrane separation technology for natural rubber (NR) wastewater treatment and reuse. Three types of spiral wound membranes were employed in the cross-flow experiments. The NR wastewater pretreated by sand filtration and cartridge filtration was forced to pass through the ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) membranes successively. The UF retentate, which containing abundant proteins, can be used to produce fertilizer, while the NF retentate is rich in quebrachitol and can be used to extract quebrachitol. The permeate produced by the RO module was reused in the NR processing. Furthermore, about 0.1wt% quebrachitol was extracted from the NR wastewater. Besides, the effluent quality treated by the membrane processes was much better than that of the biological treatment. Especially for total dissolved solids (TDS) and total phosphorus (T-P), the removal efficiency improved 53.11% and 49.83% respectively. In addition, the removal efficiencies of biological oxygen demand (BOD) and chemical oxygen demand (COD) exceeded 99%. The total nitrogen (T-N) and ammonia nitrogen (NH4-N) had approximately similar removal efficiency (93%). It was also found that there was a significant decrease in the T-P concentration in the effluent, the T-P was reduced from 200 mg/L to 0.34 mg/L. Generally, it was considered to be a challenging problem to solve for the biological processes. In brief, highly resource utilization and zero discharge was obtained by membrane separation system in the NR wastewater treatment.

• 멤브레인
• /
• 제8권1호
• /
• pp.29-41
• /
• 1998

수용상 MPD(m-phenylene diamine)와 유기상 TMC(trimesoyl chloride)를 사용하여 역삼투 복합막의 활성층 고분자인 aromatic polyamide 제조를 행하고 그 성능을 고찰하였다. 또한 polysulfone 다공성 지지막 위에 박막을 회분, 연속식으로 계면중합 제조한 후, 제조변수에 따른 역삼투 성능을 비교하였다. 회분식으로 복합막을 제조한 결과 유기상 용매의 종류, 단량체의 농도와 함침시간, 열처리 온도, 중화제, 알코올 후처리, 산 후처리 등에 의해 다양한 성능을 나타내었다. 이때, 투과량 향상에는 알코올 후처리 효과가, 또 선택도의 향상에는 단량체의 농도와 함침시간이 변수이었다. 최적조건에서 연속식 공정으로 막모듈을 제조하여 NaCl 5,000 ppm, $25kg_f/cm^2$에서 상용막과 비교할때, 투과량은 33% 증가하고 배제율은 5% 감소하였다.