• Journal of the Microelectronics and Packaging Society
• /
• 제22권3호
• /
• pp.45-50
• /
• 2015

The goal of this research is the create novel magnets with no rare-earth contents, with larger energy product by comparison with currently used ferrites. For this purpose we developed nano-sized hard-type/soft-type composite ferrite in which high remanent magnetization (Mr) and high coercivity (Hc). Nano-sized Ba-ferrite, Ni-Zn ferrite and $BaFe_{12}O_{19}/Ni_{0.5}Zn_{0.5}Fe_2O_4$ composite ferrites were prepared by sol-gel combustion method by use of glicine-nitrate and citric acid. Nanocomposite ferrites were calcined at temperature range $700-900^{\circ}C$ for 1h. According to the X-ray diffraction patterns and FT-IR spectra, single phase of NiZn-ferrite and Ba-ferrite were detected and hard/soft nanocomposite ferrite was indicated to the coexistence of the magnetoplumbite-structural $BaFe_{12}O_{19}$ and spinel-structural $Ni_{0.5}Zn_{0.5}Fe_2O_4$ that agreed with the standard JCPDS 10-0325 data. The particle size of nanocomposite turn out to be less than 120 nm. The nanocomposite ferrite shows a single-phase magnetization behavior, implying that the hard magnetic phase and soft magnetic phase were well exchange-coupled. The specific saturation magnetization ($M_s$) of the nanocomposite ferrite is located between hard ($BaFe_{12}O_{19}$) and soft ferrite($Ni_{0.5}Zn_{0.5}Fe_2O_4$). The remanence (Mr) of nanocomposite ferrite is much higher than that of the individual $BaFe_{12}O_{19}$ and $Ni_{0.5}Zn_{0.5}Fe_2O_4$ ferrite, and $(BH)_{max}$ is increased slightly.

• Journal of the Korean Magnetics Society
• /
• 제9권4호
• /
• pp.217-222
• /
• 1999

The pick up impurity was studied for preparing the NiCuZn ferrite powder by a ball milling method that usually uses in the industrial ceramic process. The raw materials of NiO, CuO, ZnO, and $Fe_2O_3$ powder were weighted according to various spinel composition and mixed for 18 hrs by a wet ball milling method after that the slurry was followed by spray dried and calcined at $700^{\circ}C$ 3 hrs. The calcined NCZF powder was finally ball milled during 65 hrs as same method. The stainless steel ball and jar are used as mixing and milling equipment and the solid concentration of the slurry was 25 vol%. The impurities, stainless steel pickup, were effected by the composition of raw materials especially iron oxide, nickel oxide in the mixing process and by the rate of calcine of NiCuZn ferrite in final milling process. The empirical equation of stainless steel pickup was driven in the wet ball milling system. Finally, the composition of NiCuZn ferrite could be controlled by the empirical equation.

• Journal of the Korean Magnetics Society
• /
• 제17권6호
• /
• pp.238-241
• /
• 2007

Ni-Cu-Zn ferrites were prepared by the co-precipitation. Physical properties and Microwave absorbing properties were investigated in Ni-Cu-Zn ferrite for the aim of microwave absorbers. From the analysis of X-ray diffraction patterns, we can see that all the particles have only a single phase spinel structure. The loss factor was maximum at sintering temperature $1100^{\circ}C$. The initial permeability of sintered ferrite obtained was an average of 50. We found that the $(Ni_{0.7}Cu_{0.2}Zn_{0.1}O)_{1.02}(Fe_2O_3)_{0.98}$ can be used in ferrite rubber composite microwave absorber when sintering temperature at $1100^{\circ}C$.

• Korean Journal of Materials Research
• /
• 제21권8호
• /
• pp.439-443
• /
• 2011

The crystal structure and magnetic properties of a new solid solution type ferrite $(Fe_2O_3)_5-(Al_2O_3)_{3.4}-(Ga_2O_3)_{0.6}-SiO$ were investigated using X-ray diffraction and M$\"{o}$ssbauer spectroscopy. The results of the X-ray diffraction pattern indicated that the crystal structure of the sample appears to be a cubic spinel type structure. The lattice constant (a = 8.317 ${\AA}$) decreases slightly with the substitution of $Ga_2O_3$ even though the ionic radii of the Ga ions are larger than that of the Al ions. The results can be attributed to a higher degree of covalency in the Ga-O bonds than in the Al-O and Fe-O bonds, which can also be explained using the observed M$\"{o}$ssbauer parameters, which are the magnetic hyperfine field, isomer shift, and quadrupole splitting. The drastic change in the magnetic structure according to the Ga ion substitution in the $ (Fe_2O_3)_5(Al_2O_3)_{4-x}(Ga_2O_3)_xSiO$ system and the low temperature variation have been studied through a M$\"{o}$ssbauer spectroscopy. The M$\"{o}$ssbauer spectrum at room temperature shows the superpositions of two Zeeman patterns and a strong doublet. It shows significant departures from the prototypical ferrite and is comparable with the diluted ferrite. The doublet of spectrum at room temperature appears to originate from superparamagnetic clusters and also the asymmetry of the doublet appears to be caused by the preferred orientation of the crystallites. The M$\"{o}$ssbauer spectra below room temperature show various complicated patterns, which can be explained by the freezing of the superparamagnetic clusters. On cooling, the magnetic states of the sample were various and multi critical.

• Journal of the Korean Ceramic Society
• /
• 제39권1호
• /
• pp.12-15
• /
• 2002

Ultrafine cadmium ferrite particles have been investigated by X-ray diffractometry, transmission electron microscopy and SQUID magnetometry. All peaks of X-ray diffraction patterns are broad, but correspond to a cubic spinel structure with the lattice constant of 8.65 $\AA$. The average particle size determined by TEM is 9.7 nm and the size distribution of particles is not normal, but lognormal. The maximal magnetization measured at 5 K was 17.7 emu/g. The experimental data show a transi-tion from a disorder ferrimagnetic phase to a spin-glass phase (i.e. reentrant behavior) with a freezing temperature (T$\_$f/) of 30 K. Superparamagnetic behavior of the particles is confirmed by the coincidence of the plots of M vs. H/T for 100 and 300 K.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1999년도 추계학술대회 논문집 전문대학교육위원 P
• /
• pp.4-6
• /
• 1999

We have performed spin-spray ferrite plating of $Fe_{3-x}Zn_xO_4$($X=0.47{\sim}0.97$) films in the temperature region T=85[$^{\circ}C$]. A reaction solution and an oxidizing solution were supplied to a reaction chamber by supply pumps. The Zn composition X in the $Fe_{3-x}Zn_xO_4$ Film increases as the content of $ZnCl_2$ increase, from X=0.47 at O.05[g/l] to X=0.97 at 0.15[g/l]. All the films are polycrystalline with no preferential orientation, and the magnetization exhibits no definite anisotropy. Grain size in the films increases as X increases, reaching 0.98[${\mu}m$] at X=0.97.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.303-305
• /
• 1999

Ultrafine cobalt ferrite particles have been synthesized using a microemulsion method. All peaks of X-ray diffranction patterns are fairly broad but correspond to a cubic spinel structure with the lattice constant 8.39$\AA$. The coercivity measureed at 5K is 15.1 kOe. The maximal magnetization measured at 5 and 300 K are 13.2 and 10.7 emu/g, respectively. The particles behave ferrimagnetically at 5 K but superparamagnetically at 300K. Superparamagnetic behavior of the particles at room temperature was confirmed by the conincidence of the M vs. H/T at different temperatures and the Mossbauer spectrum.

• Journal of Magnetics
• /
• 제2권2호
• /
• pp.38-41
• /
• 1997

Spinel ferrite thin films Fe3-x MnxO4 (x=0.000, 0.006, 0.0010, 0.015, 0.023) were prepared on the coverglass by ferrite plating technique. To investigate the uniaxial anisotrpy of the samples, the saturation and effective magnetization of the thin films were measured by VSM(vibrating sample magnetometer) and FMR(ferromagnetic resonance) measurements respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For x=0.000, 0.006, the effective magnetization was measured of temperatures form T=77 K to T=300 K. The results were analyzed in terms of Bloch's law Ms(T) = Ms(0) (1-BT3/2-CT5/2). The Bloch coefficient B, C were determined by fitting. Ms(0) was obtained by extrapolating Meff to 0 K. From this result, the spin wave stiffness constants D was also determined.

• Proceedings of the Korean Magnestics Society Conference
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.8.1-8.1
• /
• 2007

• Proceedings of the Korean Magnestics Society Conference
• /
• 한국자기학회 2014년도 자성 및 자성재료 국제학술대회
• /
• pp.132-132
• /
• 2014