• Journal of Korean Academy of Nursing Administration
• /
• v.7 no.2
• /
• pp.265-284
• /
• 2001

The case management has been applied to improve the quality of care and the cost-effectiveness in the most health care institutions. In a way of case management, the critical pathway(CP) has been executed in many acute care settings, focused on the diagnoses with high cost, high volume, and high risk. This study was conducted to develop a case management program using CP as an intervention of patients with lumbar spinal stenosis for the surgery of posterolateral fusion, and to find out the effects of the critical pathway on the quality of nursing care, patient satisfaction as an outcome of care, length of stay and medical charge, and nurses' job satisfaction. At the same time, patients' functional states were checked with the Oswestry Low Back Pain Index, to show that the CP would not decrease the patients' function compared to the control group. The subjects were 25 control patients with a usual operation of lumbar fusion and 25 experimental patients with CP. They were all female, aged $50s{\sim}70s$, admitted in the Orthopedic surgery ward of a university hospital. Also nurses on the floor using CP were asked to respond to measurement tool of job satisfaction before and after the application of CP, and compared with other nurses on the different wards. Data were analyzed with t-test for continuous variables and chi-square for non-parametric variables in addition to the reliability test of the measurement tools. The results of this study were as followings: 1. Patients' functional states The differences in Oswestry scores of the experimental and control groups assessed at preoperation and at discharge were not statistically significant. The change in scores of the experimental group measured at preoperation and at discharge was larger than that of the control group, however the difference was not statistically significant. The results indicate that the CP did not decrease the patients' functional status. 2. The quality of nursing care The total of quality of nursing care given to the experimental group was better than that of the control group(P=.000). In addition, the experimental group showed better scores of quality of every item of care than the control group(P=.000 -.004). 3. Patient satisfaction Patients of the experimental group were not more satisfied with general care than the control group. But they were more satisfied with discharge care of 'explanation about medication, body posture, and brace application' and 'explanation about the adjustment of daily living and exercise during recovery'(P= .047, P=.028). 4. Nurses' job satisfaction Nurses working with the CP showed more job satisfaction than before the CP introduction(P=.048). But the control group of nurses on a different floor showed no change in job satisfaction at the same period of time. 5. Length of stay and medical charge The mean length of stay of the experimental group was shorter than that of the control group without statistical significance. The charge of medication and treatment of the experimental group were smaller than that of the control group(P=.011, P=.000). The results of the study support that the case management using critical pathway enables to improve the quality of care and job satisfaction, to reduce the medical charge, and consequently to increase satisfaction with care. However, the case management should be instituted focusing on the quality improvement of nursing and the client satisfaction, not just for the purpose of cost-effectiveness of health care facilities.

• Journal of Biomedical Engineering Research
• /
• v.31 no.1
• /
• pp.56-66
• /
• 2010

The various total replacement artificial discs have developed because spinal fusion has shown a lesser mobility of an operated segment and an accelerated degeneration at adjacent discs. But almost artificial discs have not yet been reached on the substitute surgery of fusion because many problems such as those clinical success rates were not more than them of fusion have not solved. In this paper, vertically inserted assemble-screw fixture in vertebrae was proposed to improve the fixed capability of artificial disc. And also, to evaluate the design suitability of newly designed screw-type, including fixtures of commercial discs such as wedge and plate type, the 1/4 finite element model with a vertebra and various implanted fixtures were generated, and next, 3 bending motions such as flexion, bending and twisting under the moment of 10Nm and compression under the force of 1000N were considered, respectively and finally, FE analyses were performed. Results of three fixture types were compared, such as Range of Motion and maximal stress, and so on. For ROM, the screw type was average 58% less than the wedge type and was average 42% less than the plate type under all loading conditions. For average stress ratio at closer nodes between vertebra and each fixture, the wedge type was the lowest as minimum 0.02 in twisting, screw types were the highest as maximum 0.28 in compression. As the results of using cement material, it was predicted that the instability problem of the wedge type was better solved. The screw type which could be increased by implanting depth according to the number of assembling mid screws, showed that the decreased tendency of ROMs and maximal cancellous bone stresses. In further study, controlling the number of assembling screws that was suitable for a patient's bone quality, development of surgical tools and keeping on design supplementations, which will be able to develop the competitive artificial disc.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.5
• /
• pp.295-300
• /
• 2007

Objective : Unilateral facet dislocation of the cervical spine occurs by flexion and rotation injuries and cannot be easily reduced by axial traction. We analyzed 14 consecutive patients with unilateral facet dislocation of the cervical spine to increase knowledge about anatomical reduction of locked facet and factors for successful reduction. Methods : Fourteen patients [10 men and 4 women] with unilateral facet dislocation of the cervical spine were retrospectively analyzed. Plain X-ray, computerized tomography scan, and magnetic resonance imaging were performed. All patients underwent manual reduction and surgery with anterior interbody fusion and plate fixation. The manual reduction was performed by neck flexion and rotation to the opposite side of dislocation, followed by rotation and flexion of the head toward the side of dislocation and extension with relaxation of traction. Mean follow-up period was 17 months. The level of spine, amount of subluxation, combined facet fracture, and time from injury to initial reduction were analyzed using the data obtained from medical records. Results : Thirteen [93%] patients were reduced successfully. Immediate reduction was achieved in 7 patients but failed in 7 patients. Seven patients underwent delayed closed reduction under general anesthesia, and successful reduction was achieved in 6 patients. Only one patient with bone chips between articular facets failed to achieve anatomical reduction. Conclusion : In order to reduce the locked facet more easily and safely, we recommend manipulative traction with anterior interbody fusion and plate fixation under general anesthesia after being aware of spinal cord injury with magnetic resonance imaging.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.5
• /
• pp.603-609
• /
• 2019

Objective : The purpose of this retrospective study was to determine which of the proximal adjacent segment disease (ASD) and distal ASD was more prevalent and what parameters is more related to ASD in proximal levels and distal levels after more than 2 levels fusions. Methods : The medical records were reviewed retrospectively for 856 cases. A total of 66 cases of ASD were enrolled. On preop magnetic resonance imaging, disc degeneration was measured at the upper and lower parts of surgically treated levels and confirmed by the commonly used Pfirrmann grade. Segmental flexibility in sagittal plane was embodied in segment range of motion (ROM) obtained through flexion and extension X-ray before surgery. Coronal angle was recorded as methods Cobb's angle including fusion levels preoperatively. For the comparison of categorical variables between two independent groups, the chi-square test and Fisher exact test were performed. Results : Proximal ASD and distal ASD were 37/856 (4.32%) and 29/856 (3.39%), respectively. The incidence of proximal ASD was relatively high but insignificant differences. In comparison between ASD group and non ASD group, proximal Pfirmman was higher in proximal ASD and distal Pfirmman was higher in distal ASD group (p=0.005, p<0.008, respectively). However, in the ROM, proximal ROM was higher in proximal ASD, but distal ROM was not different between the two groups (p<0.0001, p=0.995, respectively). Coronal angle was not quite different in both groups (p=0.846). Conclusion : In spite of higher frequency in ASD in proximal level in spinal fusion, it is not clear that incidence of ASD in proximal level is not higher than that of distal ASD group in more than 2 level thoracolumbar fusions. Not only Pfirrmann grade but also proximal segmental ROM is risk factor for predicting the occurrence of ASD in patients more than 2 level of thoracolumbar spine fusion operation excluding L5S1.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.6
• /
• pp.611-619
• /
• 2017

Objective : In addition to bone bridging inside a cage or graft (intragraft bone bridging, InGBB), extragraft bone bridging (ExGBB) is commonly observed after anterior cervical discectomy and fusion (ACDF) with a stand-alone cage. However, solid bony fusion without the formation of ExGBB might be a desirable condition. We hypothesized that an insufficient contact area for InGBB might be a causative factor for ExGBB. The objective was to determine the minimal area of InGBB by finite element analysis. Methods : A validated 3-dimensional, nonlinear ligamentous cervical segment (C3-7) finite element model was used. This study simulated a single-level ACDF at C5-6 with a cylindroid interbody graft. The variables were the properties of the incorporated interbody graft (cancellous bone [Young's modulus of 100 or 300 MPa] to cortical bone [10000 MPa]) and the contact area between the vertebra and interbody graft (Graft-area, from 10 to $200mm^2$). Interspinous motion between the flexion and extension models of less than 2 mm was considered solid fusion. Results : The minimal Graft-areas for solid fusion were $190mm^2$, $140mm^2$, and $100mm^2$ with graft properties of 100, 300, and 10000 MPa, respectively. The minimal Graft-areas were generally unobtainable with only the formation of InGBB after the use of a commercial stand-alone cage. Conclusion : ExGBB may be formed to compensate for insufficient InGBB. Although various factors may be involved, solid fusion with less formation of ExGBB may be achieved with refinements in biomaterials, such as the use of osteoinductive cage materials; changes in cage design, such as increasing the area of polyetheretherketone or the inside cage area for bone grafts; or surgical techniques, such as the use of plate/screw systems.

• BMB Reports
• /
• v.44 no.7
• /
• pp.446-451
• /
• 2011

The conversion of fibroblasts into osteoblasts requires the activation of key signaling pathways, including the BMP pathway. Although Runx2 is known to be a component of the BMP pathway, the combination of Runx2 and BMP2 has not yet been examined with respect to the conversion of fibroblasts into osteoblasts. Here, human ligamentum flavum (LF) fibroblast-like cells from six patients were tested for their conversion into osteoblasts using adenoviruses expressing Runx2 or BMP2. The forced expression of Runx2 or BMP2 in primary cultured LF cells resulted in a variety of proliferation and differentiation behaviors. Combined treatment of BMP2 plus Runx2 resulted in better osteoblastic differentiation than treatment with either component alone. These results indicate that the Runx2 and BMP2 pathways possess both common and independent target genes. Collectively, Runx2 plus BMP2 mediated efficient conversion of fibroblast-like LF cells into osteoblast-like cells, suggesting the possible use of these components for clinical applications such as spinal fusion.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.784-793
• /
• 2020

Objective : We attempted to compare the incidence of pyogenic spondylitis (PS) and tuberculous spondylitis (TS) between 2007 and 2016. Furthermore, we investigated the patients who underwent surgery in 2016 compared to that in 2007. Methods : We used a nationwide database managed by the Korean National Health Insurance Service (NHIS) in 2007 and 2016. Total 9655 patients with a newly diagnosis of PS or TS were enrolled in PS or TS group. Among them, 1721 patients underwent either fusion or decompression surgery. We analyzed demographic distribution of patients according to gender and age and year of diagnosis. Results : Comparing between 2007 and 2016, the incidence of PS has increased in 2016 than in 2007 (4874 vs. 2431, p<0.0001). Conversely, declination of incidence of TS was discovered in 2016 compared to 2007 (594 vs. 1756, p<0.0001). Females showed predominance over males regarding both PS and TS (5228 vs. 4427, p<0.0001). Among them, the number of PS patients who underwent surgery increased significantly in 2016 relative to that in 2007 (979 vs. 592, p<0.0001). Conclusion : This nationwide study suggests that PS may increase and TS may decrease in Korea. In addition, demand for surgery regarding PS may increase.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.5
• /
• pp.405-410
• /
• 2020

Purpose: Pedicle screw insertion has been traditionally used as a surgical treatment for degenerative lumbar spine disease. As an alternative, the cortical-bone trajectory screw allows less invasive posterior lumbar fixation and excellent mechanical stability, as reported in several biomechanical studies. This study evaluated the clinical and radiological results of a case of early failure of cortical-bone screw fixation in posterior fixation and union after posterior decompression. Materials and Methods: This study examined 311 patients who underwent surgical treatment from 2013 to 2018 using cortical orbital screws as an alternative to traditional pedicle screw fixation for degenerative spinal stenosis and anterior spine dislocation of the lumbar spine. Early fixation failure after surgery was defined as fixation failure, such as loosening, pull-out, and breakage of the screw on computed tomography (CT) and radiographs at a follow-up of six months. Results: Early fixation failure occurred in 46 out of 311 cases (14.8%), screw loosening in 46 cases (14.8%), pull-out in 12 cases (3.9%), and breakage in four cases (1.3%). An analysis of the site where the fixation failure occurred revealed the following, L1 in seven cases (15.2%), L2 in three cases (6.5%), L3 in four cases (8.7%), L4 in four cases (8.7%), L5 in four cases (8.7%), and S1 in 24 cases (52.2%). Among the distal cortical bone screws, fixation failures such as loosening, pull-out, and breakage occurred mainly in the S1 screws. Conclusion: Cortical-bone trajectory screw fixation may be an alternative with comparable clinical outcomes or fewer complications compared to conventional pedicle screw fixation. On the other hand, in case with osteoporosis and no anterior support structure particularly at L5-S1 fusion sites were observed to have result of premature fixation failures such as relaxation, pull-out, and breakage.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.604-608
• /
• 2000

Objective : The purpose of this non randomized prospective study was to verify the effect of pain control in small doses of epidural morphine and bupivacaine through continuous infusion for 48 hours. Patients and Methods : Thirty-five patients who underwent spine surgery including laminectomy, fusion with fixation were assigned into two groups ; pain control group(n＝20) and control group(n＝15). Pain score was measured on a visual analogue scale(VAS). A continuous infusor was used to give morphine and bupivacaine continuously via indwelling epidural catheter which was placed before closure of muscles in pain control group. Results : Mean scores(VAS) of pain control group were between 1.3 and 2.1 from the 30 min to the 72 hour, but the lowest mean score in the control group was about 2.6 at the 72 hour. Although a number of extra-analgesics were used in control group, differences of mean scores were statistically significant till 24 hour in pain control group. The patients in pain control group was less painful than the patients in control group from 24 hour till 72 hour, but it was statistically insignificant. There were some side effects such as nausea/vomiting, pruritus, urinary retention which existed transiently, but there was no respiratory depression. Conclusion : It was concluded that the early postoperative pain can be easily and safely controlled with continuous infusion of epidural morphine and bupivacaine in small doses.

• Composites Research
• /
• v.25 no.4
• /
• pp.98-104
• /
• 2012

In recent years, degenerative spinal instability has been effectively treated with a cage. However, little attention is focused on the stiffness of the cage. Recent advances in the medical implant industry have resulted in the use of medical carbon fiber reinforced polymer (CFRP) cages. The biomechanical advantages of using different cage material in terms of stability and stresses in bone graft are not fully understood. A previously validated three-dimensional, nonlinear finite element model of an intact L2-L5 segment was modified to simulate posterior interbody fusion cages made of CFRP and titanium at the L4-L5 disc with pedicle screw, to investigate the effect of cage stiffness on the biomechanics of the fused segment in the lumbar region. From the results, it could be found that the use of a CFRP cage would not only reduce stress shielding, but it might also have led to increased bony fusion.