• 제목/요약/키워드: spin value

검색결과 244건 처리시간 0.031초

Added Value of Chemical Exchange-Dependent Saturation Transfer MRI for the Diagnosis of Dementia

  • Jang-Hoon Oh;Bo Guem Choi;Hak Young Rhee;Jin San Lee;Kyung Mi Lee;Soonchan Park;Ah Rang Cho;Chang-Woo Ryu;Key Chung Park;Eui Jong Kim;Geon-Ho Jahng
    • Korean Journal of Radiology
    • /
    • 제22권5호
    • /
    • pp.770-781
    • /
    • 2021
  • Objective: Chemical exchange-dependent saturation transfer (CEST) MRI is sensitive for detecting solid-like proteins and may detect changes in the levels of mobile proteins and peptides in tissues. The objective of this study was to evaluate the characteristics of chemical exchange proton pools using the CEST MRI technique in patients with dementia. Materials and Methods: Our institutional review board approved this cross-sectional prospective study and informed consent was obtained from all participants. This study included 41 subjects (19 with dementia and 22 without dementia). Complete CEST data of the brain were obtained using a three-dimensional gradient and spin-echo sequence to map CEST indices, such as amide, amine, hydroxyl, and magnetization transfer ratio asymmetry (MTRasym) values, using six-pool Lorentzian fitting. Statistical analyses of CEST indices were performed to evaluate group comparisons, their correlations with gray matter volume (GMV) and Mini-Mental State Examination (MMSE) scores, and receiver operating characteristic (ROC) curves. Results: Amine signals (0.029 for non-dementia, 0.046 for dementia, p = 0.011 at hippocampus) and MTRasym values at 3 ppm (0.748 for non-dementia, 1.138 for dementia, p = 0.022 at hippocampus), and 3.5 ppm (0.463 for non-dementia, 0.875 for dementia, p = 0.029 at hippocampus) were significantly higher in the dementia group than in the non-dementia group. Most CEST indices were not significantly correlated with GMV; however, except amide, most indices were significantly correlated with the MMSE scores. The classification power of most CEST indices was lower than that of GMV but adding one of the CEST indices in GMV improved the classification between the subject groups. The largest improvement was seen in the MTRasym values at 2 ppm in the anterior cingulate (area under the ROC curve = 0.981), with a sensitivity of 100 and a specificity of 90.91. Conclusion: CEST MRI potentially allows noninvasive image alterations in the Alzheimer's disease brain without injecting isotopes for monitoring different disease states and may provide a new imaging biomarker in the future.

$^{17}O$ NMR 기법을 이용한 상자성 자기공명조영제의 물분자 교환에 관한 연구 ($^{17}O$ NMR Study On Water Excharge Rate of Paramagnetic Contrast Agents)

  • Yongmin Chang;Sung Wook Hong;Moon Jung Hwang;Il Soo Rhee;Duk-Sik Kang
    • Investigative Magnetic Resonance Imaging
    • /
    • 제5권1호
    • /
    • pp.33-37
    • /
    • 2001
  • 목적 : 자성 자기공명조명제의 효율을 결정하는데는 상자성물질의 물분자 결합위치에 구속되어 있는 물분자와 자유 물분자사이의 물분자 교환율이 매우 중요한 역할을 담당한다. 따라서 본 연구에서는 $^{17}O-NMR$기법을 사용하여 현재 상용화 되어 있는 Gd 자기공명조영제 및 최근 간특이성 자기공명조영제로 제안되고 있는 Gd-EOB-DTPA의 물분자 교율을 측정하고자 하였다. 대상 및 방법 본 연구에 사용된 조영제는 Gd-DTPA, Gd-DTPA-BMA, Gd-DOTA, Gd-EOB-DTPA 이며 여기에 Isotech 사의 5% $^{17}O$로 치환된 증류수를 혼합하여 사용하였다. 결과적인 시료의 pH는 buffer용액을 사용하여 pH=7로 고정하였으며 다양한 온도에서 Bruker-600 (14.1 T, 81.3 MHz)모델의 NMR장비를 사용하여 측정하였다. 에코열 24개의 Carr-Purcell-Meiboom-Gill (CPMG) 펄스 시권스를 사용하여 $^{17}O$의 스핀-스핀 이완시간(T2)을 측정하고 이렇게 얻어진 T2 데이터는 최소자승법을 이용하여 Solomon-Bloembergen방정식에 fitting시켜서 최종적으로 각 조명제의 물분자 교환율을 계산하였다. 결과 : 측정된 각 조영제의 물분자 교환시간은 300k의 온도에서는 Gd-DTPA의 경우 0.427, Gd-DTPA-BMA의 경우 $1.99{\;}{\mu}s$, Gd-DOTA의 경우 $0.27{\;}{\mu}s$, Gd-EOB-DTPA의 경우 $0.11{\;}{\mu}s$로 나타났으며 이러한 물분자 교환시간은 온도에 따라 변화함을 알았다. 물분자 교환시간의 온도 의존성은 모든 조영제에서 지수함수의 형태로 나타났으나 조영제에 따라 온도가 올라감에 따라 물분자 교환시간이 감소하는 감소율에서는 차이를 나타내었다. 결론 : 상자성 조영제의 relaxation enhancement 기전을 이해하는데는 물분자 교환율에 대한 정보가 매우 중요하며 이러한 물분자 교환율을 정확히 측정하는데는 $^{17}O-NMR$기법이 매우 유용함을 알 수 있었다.

  • PDF

MRI sequence에 따른 GBCA 몰농도별 반응에 대한 정량적 분석 (Quantitative Analysis of GBCA Reaction by Mol Concentration Change on MRI Sequence)

  • 정현근;정현도;김호철
    • 전자공학회논문지
    • /
    • 제52권2호
    • /
    • pp.182-192
    • /
    • 2015
  • 본 논문에서는 GBCA(Gadolinium Based Contrast Agent)를 이용한 MRI 검사 시 다양한 MR 시퀀스에 따른 GBCA 몰농도별 조영증강 변화를 알아보기 위해 자체 제작한 MR 팬텀을 사용하여 정량적으로 평가 분석하고자 하였다. MR 팬텀을 제작하기 위해 28개의 용기에 500 mmol Gadoteridol을 saline과 혼합하여 각각 500 부터 0 mmol 까지 몰농도를 서로 다르게 하였다. 제작된 MR phantom을 1.5T MRI 장비에서 물리학적 기전이 서로 다른 T1 SE, T2 FLAIR, T1 FLAIR, 3D FLASH, T1 3D SPACE, 3D SPCIR 시퀀스로 스캔하여 신호강도 변화를 측정 한 후 비교 분석 하였다. T1 Spin echo는 Total SI(Signal Intensity)가 15608.7, Max peak는 1 mmol에서 1352.6, T2 FLAIR는 Total SI가 9106.4, Max peak는 0.4 mmol에서 1721.6, T1 FLAIR에서는 Total SI가 20972.5, Max peak는 1 mmol에서 1604.9, 3D FLASH는 Total SI가 20924.0, Max peak는 40 mmol에서 1425.7, 3D SPACE 1mm는 Total SI가 6399.0, Max peak는 3 mmol에서 528.3, 3D SPACE 5mm는 Total SI가 6276.5, Max peak는 2 mmol에서 514.6, 3D SPCIR의 경우는 Total SI가 1778.8, Max peak는 0.4 mmol에서 383.8의 신호강도를 보였다. T1 SE를 포함한 대부분의 시퀀스에서 몰농도가 높았을 때 보다는 대체적으로 일정이상 희석이 이루어진 비교적 낮은 농도에서 높은 신호강도를 보였다. 또한 서로 다른 물리학적 기전의 다양한 MR시퀀스에서 GBCA의 조영증강 패턴 역시 모두 달랐다. 본 연구를 통해 얻어진 시퀀스에 따른 GBCA 농도별 반응에 대한 정량적 데이터를 통하여 실제 임상에서의 조영증강검사에 있어서 효율적인 MR검사 프로토콜에 활용할 수 있을 것으로 사료된다.

1차원 구조를 갖는 Thiophoshates, $Al_2NiP_2S_6$ (A=Rb, Cs)의 합성, 구조 및 자기적 성질 (Synthesis, Sytructure, and Magnetic Properties of One-Dimensional Thiophoshates, $Al_2NiP_2S_6$ (A=Rb, Cs))

  • 동용관;이건수;윤호섭;허남회
    • 대한화학회지
    • /
    • 제45권3호
    • /
    • pp.242-246
    • /
    • 2001
  • 사성분계 thiophosphates, $A_2NiP_2S_6>(A=Rb$, Cs)를 halide fluxes 법으로 합성하였으며 단결정 X-ray 회절방법으로 결정 구조를 해석하였다. 이 화합물들을 $C_{2h}^5-P2_1/n$ 의 공간군을 가지며, $Rb_2NiP_2S_6$의 경우 a=5.960(2), b=12.323(4), $c=7.491(3)\AA$, $\beta=97.05(3)^{\circ}$, $V=546.0(3)\AA^3$이고$Cs_2NiP_2S_6$의 경우 a=5.957(4),b=12.696(7), $c=7.679(4)\AA$, $\beta=93.60(5)^{\circ}$, $V=579.7(5)\AA^3$인 격자상수를 갖는다. 이 두화합물은 동일한 결정 구조를 갖는다. 이들의 구조는 결정학적인 a축을 따라 성장한 1차원적인 무한사슬 $_{\infty}^1[NiP_2S_6^{2-}]$로 구성되어 있으며 이 사슬들은 알칼리 금속과의 정전기적 인력을 통하여 안정화 되어있다. Ni원자는 6개의 S원자에 의해 팔면체 배위를 하고 있고, Ni$S_6$팔면체는 $[P_2S_6^{4-}]$ 음이온 3개의 $\mu-S$ 원자들에 의해 연결되어 무한 1차원적인 사슬을 형성한다. $Cs_2NiP_2S_6$에 대한 자화율 측정결과 Neel temperature($T_N$)에 상응하는 8K 이하에서 superexchange를 통한 반자기성 magnetic coupling을 발견하였다. $T_N$이상의 온도에서는 Curie-Weiss법칙을 따른다. 자기 모멘트, C(Curie), 그리고 $\theta$(Weiss Constant)는 각각 2.77 B.M., 0.9593K, 그리고 -19.02K 이다. 측정 결과로부터 얻은 유효 자기 모멘트는 spin-only $Ni^{2+}d^8$(2.83 B.M.)계의 결과와 일치한다.

  • PDF

중합체 겔 선량측정법을 위한 최적의 자기공명영상 변수에 관한 연구 (A Study of Optimized MRI Parameters for Polymer Gel Dosimetry)

  • 조삼주;정영립;이상훈;허현도;최진호;박성일;심수정;권수일
    • 한국의학물리학회지:의학물리
    • /
    • 제23권2호
    • /
    • pp.71-80
    • /
    • 2012
  • 최신 방사선 치료 및 수술 기법에는 복잡한 3차원적 선량분포를 정확히 측정하는 실용적 선량분석 기기 및 기술이 필요하다. 본 연구에서는 실험실에서 제작한 겔을 방사선 치료 영역에서 선량계로 활용하기 위해 최적화된 자기공명영상 변수 조건에 대해 연구하였다. 이를 위해 각 자기공명영상 획득 조건에서 TE 시간 TR 시간, 영상 두께, 코일 등을 달리하여 조건 별로 획득한 영상을 이용하여 비교 평가하였고, 선량불확도 및 선량 분해능을 도입하여 본 연구에서 찾은 조건에 대해 평가하였다. 8% 젤라틴(300 bloom, Sigma-Aldrich, USA), 8% MAA (Metaacrylic acid, Sigma-Aldrich, USA), 10 mM THPC (tetrakis hydroxymethyl phosphonium, Sigma-Aldrich, USA), 그리고 0.05 mM HQ (Hydroquinone, Sigma-Aldrich, USA) 농도의 조성비를 가진 정상산소 중합체 겔을 실험실에서 합성하였다. 방사선 선량 전달은 Co-60 감마선 조사기 (Theratron-780; AECL, Ottawa, Canada)를 사용하였고 고체 팬텀을 사용하여 중합체 겔에 각각 0, 2, 4, 6, 8, 10, 12, 14 Gy의 선량을 전달하였다. 자기공명영상 장치의 특성상 T2 시간을 얻기 위해서는 fast spin echo 파형을 사용하였다. 일반적으로 Head Coil이 SNR이 Body coil 보다 낮아 선량 불확도가 우수할 것으로 예측하였으나, 일부 문헌에서는 Body coil이 영상 균일도가 우수하다고 하였다. 하지만 본 연구에서는 Head coil이 선량 불확도 및 선량 분해능이 모든 선량 영역에서 Body coil 보다 우수한 것을 확인하였다. TR 시간 연구에서 TR 1,500 ms와 TR 2,000 ms 간의 차이는 선량분해능에서 모두 큰 차이가 없으나 TR 1,500 ms가 조금 낮은 선량 불확도 값을 갖는 것을 보았다. MR 영상 두께가 2.5 mm일 경우 모든 TE 시간에 대해 4 Gy에서 가장 낮은 선량 불확도 값을 가졌다. 특히 TE 12 ms 경우 4 Gy 이후에는 가장 낮은값의 결과를 얻었다. 선량 불확도의 경우 6 Gy까지는 TE 시간에 따른 차이는 없으나 이후에는 TE 12 ms가 가장 나은 결과를 얻었다. 선량 불확도의 겨우 6 Gy까지는 모든 TE 시간에 대해 차이가 미미하나 8 Gy 이상에는 20 ms가 가장 우수한 선량 분해능 값을 가졌다. 선량 분해능 값 역시 NEX 3에서 가장 우수한 값을 가졌고 2 NEX일 때 가장 높은 분해능 값을 가졌다. 본 연구 결과 영상 두께와 NEX의 결과는 영상 두께가 얇은 경우 NEX가 높을수록 우수한 결과를 얻었고 영상 두께가 두꺼워 질수록 NEX가 낮아야 함을 확인했다.

다양한 두개강내 질환의 확산강조 자기공명영상 : 임상적 유용성 (Diffusion-Weighted MR Imaging of Various Intracranial Diseases : Clinical Utility)

  • 김영준
    • Investigative Magnetic Resonance Imaging
    • /
    • 제2권1호
    • /
    • pp.104-112
    • /
    • 1998
  • 목적 : 다양한 두개강내 질환을 가진 환자들을 대상으로 확산강조영상을 시행하여 병변의 신호강도를 분석함으로써 확산강조영상의 임상적 유용성을 알아보고자 하였다. 대상 및 방법 : 전향적으로 무작위 추출하여 확산강조영상을 시행한 70명의 환자(급성 뇌경색 20명, 만성 뇌경색 또는 소혈관 질환 21명, 두개강내 원발성 종양 14명, 뇌전이 3명, 뇌종양 5명, 뇌혈종 5명, 퇴행중의 유구낭미충 1명, 유피낭종 1명)를 대상으로 하였다. 확산강조영상은 1.5T 장치를 사용하여, single shot spin echo EPI 기법을 사용하여, 6500ms TR, 107ms TE, $128{\times}128$ matrix, 1 number of excitation, $24{\times}24{\;}cm$ field of view, 5-7mm slice thickness, 2-3 mm inter-slice gap으로, x, y, z 세방향으로 확산경사자기($b=1000s{\;}/{\;}textrm{mm}^2$)를 가하여 얻었다. 병변의 신호강도의 평가는 정성적인 분석에서는 병변의 신호강도를 임의의 5단계로 구분하여 분석하였고, 정량적 분석에서는 ROI(region of interest)를 이요하여 병변의 신호강도를 측정하여, 반대쪽 정상 뇌실질에서 얻은 신호강도와의 상대적 신호강도비를 구하였다. 결과 : 정성적 분석에서 매우 높은 신호강도를 보인 병변은 모든 예의 급성 뇌경색, 뇌농양, 유피낭종, 그리고 퇴행성 유구낭미충의 낭성 병변이었다. 뇌혈종은 모든 예에서 병변내에 매우 높은 신호강도와 낮은 신호강도가 혼재되어 있었다. 1명의 종양환자에서는 고형성 부분에 국소적인 매우 높은 신호강도가 보였다. 이들 병변 각각의 뇌실질에 대한 평균 신호 강도비는 모두 2.5 이상이엇다. 정성적 분석에서 죄실질과 같은 정도의 신호강도를 보인 경우는 실경교증(71%), 뇌종양의 고형성 부분(64%), 뇌전이 (100%), 혈관성 부종(67%)이었으며, 이들 병변의 뇌실질에 대한 평균 신호강도비는 1.15에서 1.28로 서로간에 의미있는 차이는 없었다.(p>0.1). 매우 낮거나 약간 낮은 신호강도를 보인 경우는 낭성 뇌연화증과 종양내 괴사로서, 평균 신호강도비는 각각 0.45와 0.42였다. 결론 : 급성 뇌경색, 뇌농양, 유피낭종, 퇴행중의 유구낭미충은 확산강조영상에서 매우 높은 신호강도를 보여, 다른 실환과의 감별 진단에 유용할 것으로 생각되며, 특히 뇌농양과 괴사나 낭성 부분을 포함한 뇌종양과의 감별에 많은 도움이 될 것으로 기대된다.

  • PDF

Fabrication of Schottky Device Using Lead Sulfide Colloidal Quantum Dot

  • Kim, Jun-Kwan;Song, Jung-Hoon;An, Hye-Jin;Choi, Hye-Kyoung;Jeong, So-Hee
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.189-189
    • /
    • 2012
  • Lead sulfide (PbS) nanocrystal quantum dots (NQDs) are promising materials for various optoelectronic devices, especially solar cells, because of their tunability of the optical band-gap controlled by adjusting the diameter of NQDs. PbS is a IV-VI semiconductor enabling infrared-absorption and it can be synthesized using solution process methods. A wide choice of the diameter of PbS NQDs is also a benefit to achieve the quantum confinement regime due to its large Bohr exciton radius (20 nm). To exploit these desirable properties, many research groups have intensively studied to apply for the photovoltaic devices. There are several essential requirements to fabricate the efficient NQDs-based solar cell. First of all, highly confined PbS QDs should be synthesized resulting in a narrow peak with a small full width-half maximum value at the first exciton transition observed in UV-Vis absorbance and photoluminescence spectra. In other words, the size-uniformity of NQDs ought to secure under 5%. Second, PbS NQDs should be assembled carefully in order to enhance the electronic coupling between adjacent NQDs by controlling the inter-QDs distance. Finally, appropriate structure for the photovoltaic device is the key issue to extract the photo-generated carriers from light-absorbing layer in solar cell. In this step, workfunction and Fermi energy difference could be precisely considered for Schottky and hetero junction device, respectively. In this presentation, we introduce the strategy to obtain high performance solar cell fabricated using PbS NQDs below the size of the Bohr radius. The PbS NQDs with various diameters were synthesized using methods established by Hines with a few modifications. PbS NQDs solids were assembled using layer-by-layer spin-coating method. Subsequent ligand-exchange was carried out using 1,2-ethanedithiol (EDT) to reduce inter-NQDs distance. Finally, Schottky junction solar cells were fabricated on ITO-coated glass and 150 nm-thick Al was deposited on the top of PbS NQDs solids as a top electrode using thermal evaporation technique. To evaluate the solar cell performance, current-voltage (I-V) measurement were performed under AM 1.5G solar spectrum at 1 sun intensity. As a result, we could achieve the power conversion efficiency of 3.33% at Schottky junction solar cell. This result indicates that high performance solar cell is successfully fabricated by optimizing the all steps as mentioned above in this work.

  • PDF

RF코일로 사용된 구리선 코팅재질이 자기공명영상에서의 신호대잡음비에 미치는 영향 (The Effect of Coating Material of Copper-wire RF Coil on the Signal-to-Noise Ratio in MR Images)

  • 이현승;문혜영;장용민;홍관수
    • Investigative Magnetic Resonance Imaging
    • /
    • 제13권2호
    • /
    • pp.171-176
    • /
    • 2009
  • 목적 : 자기공명영상 장비에서 신호를 주고 받는 주요 부분인 RF 코일의 성능 특성인 Q 값 (quality factor)과 신호대잡음비 (SNR, signal-to-noise ratio) 값에 미치는 코일 구리선 코팅 재질의 영향을 조사하고자 하였다. 대상 및 방법 : 폴리에스테르 (polyester), 폴리우레탄 (polyurethane), 폴리이미드 (polyimide), 폴리아마이드이미드 (polyamideimide), 폴리에스테르이미드 (polyester-imide)가 코팅된 직경 0.4 mm 구리선을 사용하여, 내경이 1.7mm인 RF 코일을 솔레노이드 형태로 제작한 후 network analyzer로 Q 값을 측정하였다. 또한 제작된 RF 코일을 600 MHz MRI (14.1 T, Bruker DMX600) 장비를 이용하여 표준시료를 이용한 자기공명영상 실험을 수행하였으며, 5개의 다른 코팅 재질과 코팅이 없는 경우에 대하여 영상에서의 신호대잡음비를 비교하였다. 결과 : 코팅 피복을 벗겨내고 측정한 신호대잡음비는 오차 범위에서 유사하였으며, 코팅되어 있는 경우에는 그 재질에 따라 Q 값 및 신호대잡음비가 다르고, 폴리에스테르의 경우를 제외하면 코팅 피복이 없는 경우와 비교하여 큰 값을 보였다. 폴리우레탄 코팅 구리선을 사용하였을 때 Q 값 및 신호대잡음비가 가장 크게 나타났으며, 가장 작은 값을 보인 폴리에스테르 코팅재질인 경우와 비교할 때 신호대잡음비가 34% 정도 큰 값을 보였다. 결론 : 1.2 mm 이하의 작은 생체시료에 적합한 솔레노이드형 RF 코일을 상용 프로브에 장착하여 사용할 수 있도록 손쉽게 제작하였으며, 폴리우레탄으로 코팅된 구리선으로 만들어진 코일의 경우 신호대잡음비가 30% 이상으로 가장 우수한 결과를 보였고, 따라서 코팅 재질의 선택이 자기공명영상의 결과에 중요하게 작용함을 확인할 수 있었다.

  • PDF

강자성층 사이에 초연자성 NiFeCuMo 중간층을 삽입한 3층 박막구조의 자기적 특성 (Magnetic Properties of Three-layered Ferromagnetic Films with a NiFeCuMo Intermediately Super-soft Magnetic Layer)

  • 최종구;이상석
    • 한국자기학회지
    • /
    • 제20권4호
    • /
    • pp.129-133
    • /
    • 2010
  • 초연자성을 띠는 코네틱(Conetic; NiFeCuMo) 박막을 상호 중간층으로 강자성체인 CoFe 또는 NiFe 박막 사이에 삽입한 코닝 유리(Corning glass)/Ta(5 nm)/[CoFe or NiFe(5 nm-t/2)]/NiFeCuMo(t = 0, 4, 6, 8, 10 nm)/[CoFe or NiFe(5 nm-t/2)]/Ta(5 nm) 3층 박막구조에 대한 자기적 특성을 조사하였다. CoFe와 NiFe 박막의 자기적 특성은 박막의 두께에 따라 크게 결정되므로 자화 곤란축과 자화 용이축으로 측정된 이방성 자기저항 곡선으로부터 얻은 보자력과 자화율을 각각 비교하였다. 특히 3층 박막구조에서 NiFe 박막 사이에 자유층으로 NiFeCuMo 박막을 삽입하면 높은 자기저항비를 유지하면서 향상된 자장감응도를 유지하는 고감도 바이오센서용 거대자기저항-스핀밸브(giant magnetoresistive-spin valves; GMR-SV) 및 자기터널접합(magnetic tunnel junction; MTJ) 소자로 활용할 수 있다.

Effects of Al2O3 Coating on BiVO4 and Mo-doped BiVO4 Film for Solar Water Oxidation

  • Arunachalam, Maheswari;Yun, Gun;Lee, Hyo Seok;Ahn, Kwang-Soon;Heo, Jaeyeong;Kang, Soon Hyung
    • Journal of Electrochemical Science and Technology
    • /
    • 제10권4호
    • /
    • pp.424-432
    • /
    • 2019
  • Planar BiVO4 and 3 wt% Mo-doped BiVO4 (abbreviated as Mo:BiVO4) film were prepared by the facile spin-coating method on fluorine doped SnO2(FTO) substrate in the same precursor solution including the Mo precursor in Mo:BiVO4 film. After annealing at a high temperature of 450℃ for 30 min to improve crystallinity, the films exhibited the monoclinic crystalline phase and nanoporous architecture. Both films showed no remarkably discrepancy in crystalline or morphological properties. To investigate the effect of surface passivation exploring the Al2O3 layer, the ultra-thin Al2O3 layer with a thickness of approximately 2 nm was deposited on BiVO4 film using the atomic layer deposition (ALD) method. No distinct morphological modification was observed for all prepared BiVO4 and Mo:BiVO4 films. Only slightly reduced nanopores were observed. Although both samples showed some reduction of light absorption in the visible wavelength after coating of Al2O3 layer, the Al2O3 coated BiVO4 (Al2O3/BiVO4) film exhibited enhanced photoelectrochemical performance in 0.5 M Na2SO4 solution (pH 6.5), having higher photocurrent density (0.91 mA/㎠ at 1.23 V vs. reversible hydrogen electrode (RHE), briefly abbreviated as VRHE) than BiVO4 film (0.12 mA/㎠ at 1.23 VRHE). Moreover, Al2O3 coating on the Mo:BiVO4 film exhibited more enhanced photocurrent density (1.5 mA/㎠ at 1.23 VRHE) than the Mo:BiVO4 film (0.86 mA/㎠ at 1.23 VRHE). To examine the reasons, capacitance measurement and Mott-Schottky analysis were conducted, revealing that the significant degradation of capacitance value was observed in both BiVO4 film and Al2O3/Mo:BiVO4 film, probably due to degraded capacitance by surface passivation. Furthermore, the flat-band potential (VFB) was negatively shifted to about 200 mV while the electronic conductivities were enhanced by Al2O3 coating in both samples, contributing to the advancement of PEC performance by ultra-thin Al2O3 layer.