• 방사성폐기물학회지
• /
• 제20권2호
• /
• pp.231-241
• /
• 2022

Several countries, including Korea, are considering the direct disposal of spent nuclear fuels. The radiological safety assessment results published after a geological repository closure indicate that the instant release is the main radiation source rather than the congruent release. Three Safety Case reports recently published were reviewed and the IRF values of seven long-lived radionuclides, including relevant experimental results, were compared. According to the literature review, the IRF values of both the CANDU and low burnup PWR spent fuel have been experimentally measured and used reasonably. In particular, the IRF values of volatile long-lived nuclides, such as ¹²⁹I and ¹³⁵Cs, were estimated from the FGR value. Because experimental leaching data regarding high burnup spent nuclear fuels are extremely scarce, a mathematical modelling approach proposed by Johnson and McGinnes was successfully applied to the domestic high burnup PWR spent nuclear fuel to derive the IRF values of iodine and cesium. The best estimate of the IRF was 5.5% at a discharge burnup of 55 GWd tHM^-1.

• 한국전산구조공학회논문집
• /
• 제20권4호
• /
• pp.427-433
• /
• 2007

가압경수로(PWR)에서 배출되는 고준위폐기물을 지하 500m의 화강암 암반의 처분장에 장기간(약 10,000년 동안) 처분하기 위하여 여러 구조적 안전성 평가 수행을 통하여 처분용기모델이 개발되었다. 기존에 설계된 가압경수로용 처분용기 모델은 구조적 안전성은 문제가 없으나 너무 무거운 단점이 지적되었다. 따라서 구조적 안전성을 유지하면서 좀 더 경량화 된 처분용기모델을 개발하는 것이 요구된다. 기존의 처분용기모델이 무거워진 한가지 이유는 처분용기 개발 시 적용된 외력조건 및 안전계수 등에 대한 조건들을 너무 엄격하게 적용했기 때문이라고 사료되기 때문에 이런 조건들을 완화하여 처분용기의 재원들을 조정하여 구조해석을 다시 수행하는 것이 요구된다. 따라서 본 논문에서는 설계 완성된 기존의 처분용기에 대하여 외력 조건 및 용기의 재원(두께 등) 들을 변화시키면서 구조해석을 재 수행하여 구조적 안전성 평가를 보완하였다. 이를 바탕으로 외력 조건에 따른 처분용기의 재원 등을 재 산출한다. 보완 해석 결과 기존의 122cm의 처분용기의 직경을 102cm까지 줄여 경량화 시킬 수 있음이 확인되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1636-1639
• /
• 2005

The process equipment and remote handling for the deep geological disposal of high-level radioactive waste(HLW) should be checked prior to the operation in view of reliability and operability. In this study, the concept of virtual environment workcell is implemented to analyze and define the feasible disposal process instead of real mock-up, which is very expensive and time consuming. To do this, the parts of process equipment for the disposal and maintenance will be modeled in 3-D graphics, assembled, and kinematics will be assigned. Also, the virtual workcell for the encapsulation and disposal process of spent fuel will be implemented in the graphical environment, which is the same as the real environment. This virtual workcell will have the several functions for verification such as analyses for the equipment's work space, the collision detection, the path planning and graphic simulation of the processes etc. This graphic virtual workcell of the HLW disposal process can be effectively used in designing of the processes for the hot cell equipment and enhance the reliability of the spent fuel management.

• 방사성폐기물학회지
• /
• 제17권4호
• /
• pp.405-418
• /
• 2019

국내 원자력발전소에서 발생하는 사용후핵연료의 제원 및 방출시점 등 특성과 현재의 고준위 방사성폐기물 기본계획에 근거한 처분시나리오를 도출하여 기존 심층 처분시스템을 바탕으로 처분효율과 경제성을 향상시킨 개선된 처분시스템을 제안하였다. 이를 위하여 국내 원자력발전소에서 발생하는 사용후핵연료의 길이에 따라 2종류의 처분용기 개념을 도출하고, 사용후핵연료 발생 년도와 현재의 기본계획에 근거한 처분 시나리오 설정에 따른 처분시점에서의 냉각기간을 고려하여 처분용기내 수용 가능한 붕괴열 량을 결정하였다. 그리고 2종류의 처분용기에 대한 처분시스템과 결정된 붕괴열을 바탕으로 열적 안정성 분석을 통하여 제안된 처분시스템의 설계요건에 대한 적합성 여부를 확인하고, 처분효율을 평가하였다. 개선된 처분시스템은 기존 처분시스템에 비하여 처분면적은 약 20% 감소되고 처분밀도는 약 20% 향상됨을 확인하였고, 처분용기와 완충재 재료도 상당량 절감됨을 확인하였다. 본 연구의 결과는 향후 사용후핵연료 관리정책 수립 및 실제 사업을 위한 처분시스템 설계를 위한 자료로 활용될 수 있다.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1540-1554
• /
• 2023

To use nuclear energy sustainably, spent nuclear fuel, classified as high-level radioactive waste and inevitably discharged after electricity generation by nuclear power plants, must be managed safely and isolated from the human environment. In Korea, the land area is limited and the amount of high-level radioactive waste, including spent nuclear fuels to be disposed, is relatively large. Thus, it is particularly necessary to maximize disposal efficiency. In this study, a high-efficiency deep geological repository concept was developed to enhance disposal efficiency. To this end, design strategies and requirements for a high-efficiency deep geological repository system were established, and engineered barrier modules with a disposal canister for pressurized water reactor (PWR)-type and pressurized heavy water reactor type Canada deuterium uranium (CANDU) plants were developed. Thermal and structural stability assessments were conducted for the repository system; it was confirmed that the system was suitable for the established strategies and requirements. In addition, the results of the nuclear safety assessment showed that the radiological safety of the new system met the Korean safety standards for disposal of high-level radioactive waste in terms of radiological dose. To evaluate disposal efficiency in terms of the disposal area, the layout of the developed disposal areas was assessed in terms of thermal limits. The estimated disposal areas were 2.51 km² and 1.82 km² (existing repository system: 4.57 km²) and the excavated host rock volumes were 2.7 Mm³ and 2.0 Mm³ (existing repository system: 4.5 Mm³) for thermal limits of 100 ℃ and 130 ℃, respectively. These results indicated that the area and the excavated volume of the new repository system were reduced by 40-60% compared to the existing repository system. In addition, methods to further improve the efficiency were derived for the disposal area for deep geological disposal of spent nuclear fuel. The results of this study are expected to be useful in establishing a national high-level radioactive waste management policy, and for the design of a commercial deep geological repository system for spent nuclear fuels.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2062-2066
• /
• 2022

Nuclear energy sources are indispensable in cost effectively achieving carbon neutral economy, where public opinion is critical to adoption as the consequences of nuclear accident can be catastrophic. In this context, discussion on spent nuclear fuel is a prerequisite to expanding nuclear energy, as it leads to the issue of radioactive waste disposal. Given the dearth of study on spent nuclear fuel public acceptance, we use text mining and big data analysis on the news article and public comments data on Naver news portal to identify the Korean public opinion on spent nuclear fuel. We identify that the Korean public is more interested in the nuclear energy policy than spent nuclear fuel itself and that the alternative energy sources affect the position towards spent nuclear fuel. We recommend relating spent nuclear fuel issue with nuclear energy policy and environmental issues of alternative energy sources to further promote spent nuclear fuel.

• 방사성폐기물학회지
• /
• 제20권3호
• /
• pp.365-369
• /
• 2022

Operating and decommissioning nuclear power plants generates radioactive waste. This radioactive waste can be categorized into several different levels, for example, low, intermediate, and high, according to the regulations. Currently, low and intermediate-level waste are stored in conventional 200-liter drums to be disposed. However, in Korea, the disposal of intermediate-level radioactive waste is virtually impossible as there are no available facilities. Furthermore, large-sized intermediate-level radioactive waste, such as reactor internals from decommissioning, need to be segmented into smaller sizes so they can be adequately stored in the conventional drums. This segmentation process requires additional costs and also produces secondary waste. Therefore, this paper suggests repurposing the no-longer-used spent nuclear fuel casks. The casks are larger in size than the conventional drums, thus requiring less segmentation of waste. Furthermore, the safety requirements of the spent nuclear fuel casks are severer than those of the drums. Hence, repurposed spent nuclear fuel casks could better address potential risks such as dropping, submerging, or a fire. In addition, the spent nuclear fuel casks need to be disposed in compliance with the regulations for low level radioactive waste. This cost may be avoided by repurposing the casks.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2288-2297
• /
• 2023

Current designs of both large reactor units and small modular reactors utilize a nuclear fuel with increasing enrichment. This increasing demand for better nuclear fuel utilization is a challenge for nuclear fuel handling facilities. The operation with higher enriched fuels leads to reduced reserves to legislative and safety criticality limits of spent fuel transport, storage and final disposal facilities. Design changes in these facilities are restricted due to a boron content in steel and aluminum alloys that are limited by rolling, extrusion, welding and other manufacturing processes. One possible solution for spent fuel pools and casks is the burnup credit method that allows decreasing very high safety margins associated with the fresh fuel assumption in spent fuel facilities. This solution can be supplemented or replaced by an alternative solution based on placing the neutron absorber material directly into the fuel assembly, where its efficiency is higher than between fuel assemblies. A neutron absorber permanently fixed in guide tubes decreases system reactivity more efficiently than absorber sheets between the fuel assemblies. The paper summarizes possibilities of fixed neutron absorbers for various nuclear fuel and fuel handling facilities. Moreover, an absorber material was optimized to propose alternative options to boron. Multiple effective absorbers that do not require steel or aluminum alloy compatibility are discussed because fixed absorbers are placed inside zirconium or steel cladding.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.327-330
• /
• 2003

In this paper, a viscoelastic structural analysis for the spent pressurized water reactor(PWR) nuclear fuel disposal canister is carried out to predict the collapse of the canister while the canister is stored in a deep repository for long time. There may exist some subterranean heat in a deep repository while the nuclear fuel disposal canister is stored for long time. Then, a time-dependent viscoelastic structural deformation may occur in the canister due to the subterrnean heat Hence, the viscoelastic stress variation according to time should be computed to predict the structural strength of the canister. A viscoelastic material model is adopted. Analysis results show that even though some subterrnean heat may exist for quite a long time, the canister structure still endures stresses below the yield strength of the canister. Hence, some subterranean heat cannot seriously affect the structural strength of the canister.

• 한국전산구조공학회논문집
• /
• 제26권5호
• /
• pp.359-371
• /
• 2013

본 논문은 두 편으로 구성된 사고로 지면에 추락낙하 충돌하는 고준위폐기물 처분용기에 대한 기구동역학 해석 논문 중 첫 번째 논문으로 기구동역학 해석에 대한 일반 이론연구를 수행하였다. 이를 통하여 고준위폐기물 처분용기의 구조 안전성 설계에 요구되는 처분용기 처분 시 사고로 추락낙하 하여 지면과 충돌하는 경우 처분용기에 가해지는 충격력을 이론적으로 구하고자 하였다. 이론 연구의 주된 내용은 다물체 동역학의 운동방정식에 관한 것이며 이를 토대로 다물체간 충돌 시 발생하는 충격력을 구하는 문제를 이론적으로 다루었다. 이렇게 이론적으로 구한 충격력을 처분장에서 처분용기 운송 시 운반차량에서 사고로 추락낙하 하여 지면과 충돌하는 처분용기에 발생하는 충격력을 구하는 문제에의 적용을 검토하였다.