• Restorative Dentistry and Endodontics
• /
• v.26 no.4
• /
• pp.263-272
• /
• 2001

The aim of this study was to investigate the influence of four different light curing modes on the marginal leakage of Class V composite resin restoration. Eighty extracted human premolars were used. Wedge-shaped class Y cavities were prepared on the buccal surface of the tooth with high-speed diamond bur without bevel. The cavities were positioned half of the cavity above and half beyond the cemento-enamel junction. The depth, height, and width of the cavity were 2 mm, 3 mm and 2 mm respectively. The specimens were divided into 4 groups of 20 teeth each. All the specimen cavities were treated with Prime & Bond$^{R}$ NT dental adhesive system (Dentsply DeTrey GmbH, Germany) according to the manufacturer's instructions and cured for 10 seconds except group VI which were cured for 3 seconds. All the cavities were restored with resin composite Spectrum$^{TM}$ TPH A2 (Dentsply DeTrey GmbH, Germany) in a bulk. Resin composites were light-cured under 4 different modes. A regular intensity group (600 mW/${cm}^2$, group I) was irradiated for 30 s, a low intensity group (300 mW/${cm}^2$, group II) for 60 s and a ultra-high intensity group (1930 mW/${cm}^2$, group IV) for 3 s. A pulse-delay group (group III) was irradiated with 400 mW/${cm}^2$ for 2 s followed by 800 mW/${cm}^2$ for 10 s after 5 minutes delay. The Spectrum$^{TM}$ 800 (Dentsply DeTrey GmbH, Germany) light-curing units were used for groups I, II and III and Apollo 95E (DMD, U.S.A.) was used for group IV. The composite resin specimens were finished and polished immediately after light curing except group III which were finished and polished during delaying time. Specimens were stored in a physiologic saline solution at 37$^{\circ}C$ for 24 hours. After thermocycling (500$\times$, 5-55$^{\circ}C$), all teeth were covered with nail varnish up to 0.5 mm from the margins of the restorations, immersed in 37$^{\circ}C$, 2% methylene blue solution for 24 hours, and rinsed with tap water for 24 hours. After embedding in clear resin, the specimens were sectioned with a water-cooled diamond saw (Isomet$^{TM}$, Buehler Co., Lake Bluff, IL, U.S.A.) along the longitudinal axis of the tooth so as to pass the center of the restorations. The cut surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan) at ${\times}$25 magnification, and the images were captured with a CCD camera (GP-KR222, Panasonic, Japan) and stored in a computer with Studio Grabber program. Dye penetration depth at the restoration/dentin and the restoration/enamel interfaces was measured as a rate of the entire depth of the restoration using a software (Scion image, Scion Corp., U.S.A.) The data were analysed statistically using One-way ANOVA and Tukey's method. The results were as follows : 1. Pulse-Delay group did not show any significant difference in dye penetration rate from other groups at enamel and dentin margins (p>0.05) 2. At dentin margin, ultra-high intensity group showed significantly higher dye penetration rate than both regular intensity group and low intensity group (p<0.05). 3. At enamel margin, there were no statistically significant difference among four groups (p>0.05). 4. Dentin margin showed significantly higher dye penetration rate than enamel margin in all groups (p<0.05).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.26-32
• /
• 2017

Enlargement and speed-up of a ship and diversification of ship's type have served to greatly increase the importance of marine transport means. It's reported that accident occurrence frequency of collision is high next to engine damage among the ship accident types, and that the accident ratio according to human factors is also high. In addition, ship accidents come to occur caused by complex cause factors rather than a sole cause factor, it is necessary to investigate the cause factors through the written verdict. This study proposed the cause factors of collision ship accident on the basis of human factors in collision ship accident among the written verdicts provided by the Korean Maritime Safety Tribunal, and inquired into the cause factor and effect through the correlation analysis of accident occurrence factors. Also, this study predicted the collision accident through analyzed the major cause factor of the occurrence at the zero minute when collision on the basis of the time taken from the time point of detecting collision of ships to the time point of collision occurrence. This study used commercial software-Statistical Package for Social Sciences (SPSS Ver21.0) to do correlation analysis. For time analysis, this study analyzed the cause factor and time by analyzing the time taken from the time point of detected ships to the time point of collision occurrence on the basis of the written verdicts. The study analysis showed that there were many cases of collision ship accidents occurrence caused by more than two sorts of cause factors, and that the case (zero minute) where there is no time to spare for collision avoidance accounted for 36.1 %, and negligence in guard or surveillance of the other ship, and sailing while drowsy, or drinking was a contributor to an accident. Poor watch keeping is very strong relationship with pool ready for sail.

• Progress in Medical Physics
• /
• v.26 no.2
• /
• pp.87-92
• /
• 2015

The gated RapidArc may produce a dosimetric error due to the stop-and-go motion of heavy gantry which can misalign the gantry restart position and reduce the accuracy of important factors in RapidArc delivery such as MLC movement and gantry speed. In this study, the effect of stop-and-go motion in gated RapidArc was analyzed with varying gating window time, which determines the total number of stop-and-go motions. Total 10 RapidArc plans for treatment of liver cancer were prepared. The RPM gating system and the moving phantom were used to set up the accurate gating window time. Two different delivery quality assurance (DQA) plans were created for each RapidArc plan. One is the portal dosimetry plan and the other is MapCHECK2 plan. The respiratory cycle was set to 4 sec and DQA plans were delivered with three different gating conditions: no gating, 1-sec gating window, and 2-sec gating window. The error between calculated dose and measured dose was evaluated based on the pass rate calculated using the gamma evaluation method with 3%/3 mm criteria. The average pass rates in the portal dosimetry plans were $98.72{\pm}0.82%$, $94.91{\pm}1.64%$, and $98.23{\pm}0.97%$ for no gating, 1-sec gating, and 2-sec gating, respectively. The average pass rates in MapCHECK2 plans were $97.80{\pm}0.91%$, $95.38{\pm}1.31%$, and $97.50{\pm}0.96%$ for no gating, 1-sec gating, and 2-sec gating, respectively. We verified that the dosimetric accuracy of gated RapidArc increases as gating window time increases and efforts should be made to increase gating window time during the RapidArc treatment process.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.209-216
• /
• 1998

The results of the study of diving the 21st century's Korea fashion market into consumer market, fashion market, and a new marketing strategy are as follows. The 21st consumer market is First, a fashion democracy phenomenon. As many people try to leave unconditional fashion following, consumer show a phenomenon to choose and create their own fashion by subjective judgements. Second, a phenomenon of total fashion pursuit. Consumer in the future are likely to put their goals not in differentiating small item products, but considering various fashion elements based on their individuality and sense of value. Third, world quality-oriented. With the improvement of life level, it accomplishes to emphasize consumers' fashion mind on the world wide popular use of materials, quality, design and brand image. Fourth, with the entrance of neo-rationalism, consumers show increasing trends to emphasize wisdom, solidity in goods strategy pursuing high quality fashion and to demand resonable prices. Fifth, concept-oriented. Consumers are changing into pursuing concept appropriate to individual life scene. Prospecting the composition of the 21st century's fashion market, First, sportive casual zone will draw attention more than any other zone. This is because interest in sports will grow according to the increase of leisure time and the expasion of time and space in the 21st century, and also ecology will become the important issue of sports sense because of human beings's natural habit toward nature. Second, the down aging phenomenon will accelerate its speed as a big trend. Third, a retro phenomenon, a concept contrary to digital and high-tech, will become another big trend for its remake, antique, and classic concept in fashion market with ecology trend. New marketing strategy to cope with changing fashion market is as follows. First, with the trend of borderless concept, borders between apparels are becoming vague, for example, they offer custom-made products to consumers. Second, as more enterprises take the way of gorilla and guerrilla where guerrillas who aim at niche market show up will develop. Basically, they think highly of individual creative study, and pursue the scene adherence with high sensitiveness. However this polarization becomes mutually-supplementing relationship showing gorilla's guerilla movement, and guerilla's gorilla high-tech. Third with the development of value retailing, enterprises pursuing mass merchandising of groups called category killers are expanded and amplified to new product fields, and expand business' share. Fourth, using outsourcing, the trend to use exterior function leaving each enterprise's strength by inspecting its own work is gradually strong. Fifth, with the expansion of none store sale, the entrance of the internet and the CD-ROM sales added to communication sales such as catalogues are specified. An eminent American think tank expect that 5-5% of the total sale of clothes and home goods in 2010 will be done by none store sale. Accordingly, to overcome the problems, First international, global level marketing, Second, the improvement of technology, Third, knowledge-creating marketing are needed.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.91-118
• /
• 2009

In the Republic of Korea, Regional Airlines from Jeju Air and Hansung Airlines have recently entered the domestic market to compete with the existing Legacy Airlines. In addition many of newly established regional low cost carriers like Air Busan, JeanAir, Easter Airline, are preparing to enter the jungle market. These circumstantial changes have come about as transportation competitiveness are getting weak in the market due to simultaneous expansion of surface modes such as a new opening of high-speed rail and extension of highways. The jumbled market entry by regional low cost carriers makes an enormous influence not only in managing transport network of existing carriers but also for the domestic policy of aviation authorities. It is too early to judge whether they would succeed or not. It is necessary to analyze the network operation of these regional carriers launching domestic routes and preparing to launch short distance international routes under the rapid changing market circumstances such as introduction of KTX or decrease in domestic routes by Legacy Airlines. Many regional airlines are to launch the routes connecting Korea-China-Japan, if they could ensure long-haul international routes successfully, it would follow that the difference between Legacy Airlines and Regional Airlines would decrease more and more, which would result in appearance of the $3^{rd}$or $4^{th}$Legacy Airlines The purpose of this study is to analyze the introduction of low cost carriers by regions and economic regional carrier network for non-scheduled air transportation market by taking a look at the regional airlines transportation network in the early stage of the domestic air transport market. For this purpose, cost and profit structure and management effect of transportation cost will be analyzed by comparing the presently operated routes of regional airlines with those of Legacy Airlines. And also demonstrative analysis demanded by the actual market will be achieved through surveys from experts, the actual airlines and travel agencies to build up transportation network.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.53-62
• /
• 2018

Follofwing the accelerating speed-up of trains and rising demand for large-volume transfer capacity, not only in Korea, but also around the world, track structures for trains have been improving consistently. Precast concrete slab track (PST), a concrete structure track, was developed as a system that can fulfil new safety and economic requirements for railroad traffic. The purpose of this study is to provide the information required for the development and design of the system in the future, by analyzing the behavior of each structural member of the PST system. The stress distribution result for different combinations of appropriate loads according to the KRL-2012 train load and KRC code was analyzed by conducting a three-dimensional finite element analysis, while the result for different thicknesses of the grouting layer is also presented. Among the structural members, the largest stress took place on the grouting layer. The stress changed sensitively following the thickness and the combination of loads. When compared with a case of applying only a vertical KRL-2012 load, the stress increased by 3.3 times and 14.1 times on a concrete panel and HSB, respectively, from the starting load and temperature load. When the thickness of the grouting layer increased from 20 mm to 80 mm, the stress generated on the concrete panel decreased by 4%, while the stress increased by 24% on the grouting layer. As for the cracking condition, tension cracking was caused locally on the grouting layer. Such a result indicates that more attention should be paid to the flexure and tension behavior from horizontal loads rather than from vertical loads when developing PST systems. In addition, the safety of each structural member must be ensured by maintaining the thickness of the grouting layer at 40 mm or more.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.73-80
• /
• 2006

The main purpose of this study is to help develop the productional system of the three dimensional digital animation domestically. Many 30 digital animation projects are being developed and finished with foreign computer graphics technology. However, the 3D animation market in Korea is not as good as the ones in other countries. One of the most significant problems is the lack of a program of study in Korea concerning productional systems used to create 3D animation. We previously imported an advanced productional system from the U.S., which was adaptable to big projects, and consequently, expanded the international digital animation market. Now, we need to develop a new production system which is fully adaptable to the Korean market. A non-sequential system of 3D digital animation tailored for small projects is more adaptable to domestic industry than the sequential system known as the 'Pipeline system.' A non-sequential system is good for small productions that are trying to create animation on a limited budget. The workers in this system can learn to make animation fast and effectively. They can also learn how to discuss with the others in order to avoid duplication of action. In contrast, in the Pipeline System, many workers repeat confirmation steps during the process for the same animations. The benefit of the non-sequential system is that the worker's interest and education can speed up production, because he/she can quickly learn every step of the animation process instead of just doing a particular job which does not allow him/her to observe the other steps involved. The 'animatic' step is the most important in the non-sequential system. The final animation is produced from the animatic. It is developed from scratch through to the final product but only after the agreement of all the workers, including a director.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.401-410
• /
• 2005

A series of studies involving formulation processes, bubbling activity test, diffusibility test and biological efficacy test was undertaken to develop Jumbo herbicide formulations in paddy rice field. Gas evolution speed from the tablets prepared by different organic acids was in the order of oxalic acid, malonic acid, citric acid, and tartaric acid. The total volume of evolved gas from the tablet and diffusibility of the active ingredient in the submerged water were increased with increase of water temperature; the volume from 1 g of tablet at 10, 15, 25 and $30^{\circ}C$ for 5 minutes after immersion into water was 20, 25, 28, 45, 57 mL, respectively. The concentration of halosulfuron-methyl and pyriminobac-methyl in submerged water at 5, 15, 20 and $30^{\circ}C$ at the 2.4 m distance from the applied spot of the tablet was 20, 48, 85, and 97% of the concentration of treated spot, respectively. The evolved gas volume from the tablets was not affected by pH of submerged water. The concentration of halosulfuron-methyl in different sizes of submerged water within 24 hours after treatment of the tablet was maintained 0.16 ppm, which is ideal concentration at standard dosage regardless of the submerged water area. The concentration of pyriminobac-methyl was also uniformly dispersed in the water within 24 hours after applying it into the submerged water. The wind velocity of 5 m $sec^{-1}$ on concentration distribution of halosulfuron-methyl and pyriminobac-methyl in the submerged water 24 hours after treatment was not influenced; an equal concentration in the up the wind and down the wind from the applied spot was maintained. Spot treatments of one tablet formulations(5 g) including 4 times higher dosage at 4 different spots resulted in even concentration distribution of active ingredient in the water 24 hours after applying it into the submerged water.

• Journal of KIISE:Databases
• /
• v.30 no.4
• /
• pp.381-396
• /
• 2003

Subsequence matching is an operation that finds subsequences whose changing patterns are similar to a given query sequence from time-series databases. This paper points out the performance bottleneck in subsequence matching, and then proposes an effective method that improves the performance of entire subsequence matching significantly by resolving the performance bottleneck. First, we analyze the disk access and CPU processing times required during the index searching and post processing steps through preliminary experiments. Based on their results, we show that the post processing step is the main performance bottleneck in subsequence matching, and them claim that its optimization is a crucial issue overlooked in previous approaches. In order to resolve the performance bottleneck, we propose a simple but quite effective method that processes the post processing step in the optimal way. By rearranging the order of candidate subsequences to be compared with a query sequence, our method completely eliminates the redundancy of disk accesses and CPU processing occurred in the post processing step. We formally prove that our method is optimal and also does not incur any false dismissal. We show the effectiveness of our method by extensive experiments. The results show that our method achieves significant speed-up in the post processing step 3.91 to 9.42 times when using a data set of real-world stock sequences and 4.97 to 5.61 times when using data sets of a large volume of synthetic sequences. Also, the results show that our method reduces the weight of the post processing step in entire subsequence matching from about 90% to less than 70%. This implies that our method successfully resolves th performance bottleneck in subsequence matching. As a result, our method provides excellent performance in entire subsequence matching. The experimental results reveal that it is 3.05 to 5.60 times faster when using a data set of real-world stock sequences and 3.68 to 4.21 times faster when using data sets of a large volume of synthetic sequences compared with the previous one.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.60-61
• /
• 2003

A new approach to reduce the computation time of genetic algorithm (GA) for making binary phase holograms is described. Synthesized holograms having diffraction efficiency of 75.8% and uniformity of 5.8% are proven in computer simulation and experimentally demonstrated. Recently, computer-generated holograms (CGHs) having high diffraction efficiency and flexibility of design have been widely developed in many applications such as optical information processing, optical computing, optical interconnection, etc. Among proposed optimization methods, GA has become popular due to its capability of reaching nearly global. However, there exits a drawback to consider when we use the genetic algorithm. It is the large amount of computation time to construct desired holograms. One of the major reasons that the GA' s operation may be time intensive results from the expense of computing the cost function that must Fourier transform the parameters encoded on the hologram into the fitness value. In trying to remedy this drawback, Artificial Neural Network (ANN) has been put forward, allowing CGHs to be created easily and quickly (1), but the quality of reconstructed images is not high enough to use in applications of high preciseness. For that, we are in attempt to find a new approach of combiningthe good properties and performance of both the GA and ANN to make CGHs of high diffraction efficiency in a short time. The optimization of CGH using the genetic algorithm is merely a process of iteration, including selection, crossover, and mutation operators [2]. It is worth noting that the evaluation of the cost function with the aim of selecting better holograms plays an important role in the implementation of the GA. However, this evaluation process wastes much time for Fourier transforming the encoded parameters on the hologram into the value to be solved. Depending on the speed of computer, this process can even last up to ten minutes. It will be more effective if instead of merely generating random holograms in the initial process, a set of approximately desired holograms is employed. By doing so, the initial population will contain less trial holograms equivalent to the reduction of the computation time of GA's. Accordingly, a hybrid algorithm that utilizes a trained neural network to initiate the GA's procedure is proposed. Consequently, the initial population contains less random holograms and is compensated by approximately desired holograms. Figure 1 is the flowchart of the hybrid algorithm in comparison with the classical GA. The procedure of synthesizing a hologram on computer is divided into two steps. First the simulation of holograms based on ANN method [1] to acquire approximately desired holograms is carried. With a teaching data set of 9 characters obtained from the classical GA, the number of layer is 3, the number of hidden node is 100, learning rate is 0.3, and momentum is 0.5, the artificial neural network trained enables us to attain the approximately desired holograms, which are fairly good agreement with what we suggested in the theory. The second step, effect of several parameters on the operation of the hybrid algorithm is investigated. In principle, the operation of the hybrid algorithm and GA are the same except the modification of the initial step. Hence, the verified results in Ref [2] of the parameters such as the probability of crossover and mutation, the tournament size, and the crossover block size are remained unchanged, beside of the reduced population size. The reconstructed image of 76.4% diffraction efficiency and 5.4% uniformity is achieved when the population size is 30, the iteration number is 2000, the probability of crossover is 0.75, and the probability of mutation is 0.001. A comparison between the hybrid algorithm and GA in term of diffraction efficiency and computation time is also evaluated as shown in Fig. 2. With a 66.7% reduction in computation time and a 2% increase in diffraction efficiency compared to the GA method, the hybrid algorithm demonstrates its efficient performance. In the optical experiment, the phase holograms were displayed on a programmable phase modulator (model XGA). Figures 3 are pictures of diffracted patterns of the letter "0" from the holograms generated using the hybrid algorithm. Diffraction efficiency of 75.8% and uniformity of 5.8% are measured. We see that the simulation and experiment results are fairly good agreement with each other. In this paper, Genetic Algorithm and Neural Network have been successfully combined in designing CGHs. This method gives a significant reduction in computation time compared to the GA method while still allowing holograms of high diffraction efficiency and uniformity to be achieved. This work was supported by No.mOl-2001-000-00324-0 (2002)) from the Korea Science & Engineering Foundation.