• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.652-657
• /
• 2004

Korean High Speed Train (KHST) designed to operate at 350km/h has been tested on KyungBu high speed line since it was developed in 2002. The specification of the interior noise level for high speed train in Korea has been adopted through the contract between KHRC and Korea TGV consortium, not a national specification. But it can not be adopted to KHST designed at 350km/h because this has involved up to 300Km/h. Therefor, in this paper, the interior noise level at 350km/h are predicted in passenger car using the results at 300Km/h and these results show that the KHST's interior noise levels are good up to 300Km/h but need to be reduced at 350Km/h in the view point of limit value at 300Km/h of the contract between KHRC and Korea TGV consortium. Also it proposed to make a national specification for the interior noise level to evaluate it in detail at 350Km/h.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.105-108
• /
• 2005

The radiated noise from the automotive intake system should be predicted at the design stage. To this end, the precise measurement of in-duct acoustic source parameters of the intake system, i.e., the source strength and source impedance, is essential. Most of previous works on the measurement of acoustic source parameters were performed under a fixed engine speed condition. However, the requirement of vehicle manufacturer is the noise radiation pattern as a function of engine speed. In this study, the direct method was employed to measure the source parameters of engine intake system under a fixed engine speed and engine run-up condition. It was noted that the frequency spectra of source impedance hardly changes with varying the engine speed. Thus, it is reasonable to calculate the source strength under the engine run-up condition by assuming that source impedance is invariant with engine speed. Measured and conventional source models, i.e., constant pressure source, constant velocity source, and non-reflective source, were utilized to predict insertion loss and radiated sound pressure level. A reasonable prediction accuracy of radiated sound pressure level spectra from the intake system was given in the test vehicle when using the measured source characteristics which were acquired under the operating condition.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.61-69
• /
• 1988

Recently the automization of wood manufacturing and the development of CNC machine tools becomes the center of interest. Cutting mechanism, tool wear and the roughness of machined surface have been studied. In the studies about wood for special uses, concrete data of cutting is desired. While Pinus densiflora is characterized that heartwood develops as age increases, Chunyang District has the characteristic of strength, red color, relatively regular chap and high heartwood - percentage. But there is no data about cutting this wood, Chunyang District. In this study face milling by sintered carbide tool was excuted to Chunyang District. Cutting force, Surface roughness and states were investigated with regard to cutting speed. Example results were as follows; 1) Mean cutting resistance against lateral component force and longitudinal component force decreased rapidly up to cutting speed of 155 m/min, and remains constant above this speed. 2) The surface roughness of cutting surface lowered as cutting speed increased, regardless of fiber formation. Radial rougness of fiber is larger than lineal surface roughness. 3) Increase in Cutting speed made machining mark restrained. Down-milling showed larger marks than up-milling.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.478-482
• /
• 2002

Recently, the demand for the optical cable is rapidly glowing because the number of internet user increases and high speed internet data transmission is required. To meet this demand, it is necessary to have a sufficient manufacturing capability for mass and high-quality production. But the present optical cable winding system has some serious problems such that the optical cable of radius (6 mm -40 mm) is often piled up and collapsed usually at the edge of the bobbin in the process of the cable winding. It is often necessary to have an additional operator in order to adjust the cable, which causes the productivity decrease. In order to improve a performance of cable winding system which deals with relatively thick cable( radius : 6 mm -40 mm ), we developed a new guiding system for a high-speed self-align cable winding. First of all, the winding mechanism was analyzed. Synchronization logics for the motions of winding, traversing, and the guiding were created and implemented by using the PLC and guiding system controller in a prototype cable winding system manufactured in the CILS( Computer Integrated Large scale System ) lab. An experimental verification was carried out to validate the logic. Results showed that the winding system with the developed guiding system outperformed in reducing pile-up and collapse in the high-speed winding(up to 300 mm/s) compared with the system without the guiding system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.9-15
• /
• 2006

Experiments are conducted to compare fuel economy of FTP-75 mode on two different lock-up conditions; (A) Lock-up on at engine speed of 1,200(rpm) and above for 3rd & 4th gear, (B) Lock-up on at engine speed of 1400rpm and above for 4th gear only. As a result, case A had better fuel economy about 2.75(%) than case B for FTP-75 mode. Simulation(CRUISE, AVL) study is also carried out in order to estimate the effect of Lock-up control strategy for vehicle fuel economy. The fuel economy simulation result agrees with the measured fuel economy within error of 2(%). The improved Lock-up control strategy is proposed by simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.194-202
• /
• 1998

This paper describes a hardware implementation method of a Petri Net-based controller. A flexible and systematic implementation method, based on look-up tables, is suggested, which enables to build high speed Petri net-based controllers. The suggested method overcomes the inherent speed limit that arises from the microprocessors by using of matrix-based look-up tables. Based on the matrix framework, this paper suggests various specific data path structures as well as a basic data path structure, accompanied by evolution algorithms, for sub-class Petri nets. A new sub-class Petri net, named Biarced Petri Net, resolves memory explosion problem that usually comes with matrix-based look-up tables. The suggested matrix-based method based on the Biarced Petri net has as good efficiency and expendability as the list-based methods. This paper shows the usefulness of the suggested method, evaluating the size of the look-up tables and introducing an architecture of the signal processing unit of a programmable controller. The suggested implementation method is supported by an automatic design support program.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2306-2309
• /
• 2011

With the opening of 1st phase and 2nd phase in Gyeongbu High Speed Line, KTX(The Korea Train Express) and Sancheon(2nd generation of High Speed Train) are operating commercially on entire line. Gyeongbu High Speed Line can be separated as several sections. In this entire line, a few types of train has operating by it's own pattern. However, commercial speed of the line compared with the maximum speed of Train is rather slow. Through this study, I found the reason of the slow speed on the Catenary system and suggested a solution.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.1971-1973
• /
• 1997

Space Vector control of linear induction motor without speed sensor is one of the most up-to-date researching subjects to the engineers in the fields of power electronics and control theory. A conveyance SLIM (Single-sided Linear Induction Motor) has required a stable speed and a soft start/stop when the goods convey. So, the close loop control method to use a speed sensor have been adopted and as the speed sensor, a linear encorder has been used. But when the speed sensor used, the application boundary is limited and the confidence of system is diminished because it is sensitive to external environment variations and its cost is very expensive. So, to solve these problems, this paper deals with speed control of the conveyance SLIM using space vector without speed sensorless.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.574-579
• /
• 2011

3-Roll coating process as a key application technology for manufacturing automotive pre-painted metal-sheets has been studied. The 3-Roll coating system for this study consists of pick-up roll for picking up and distributing coating liquid from the reservoir, metering roll to properly meter coating liquid in metering gap regime, and applicator roll for directly transferring liquid into metal-sheet surface. Flow dynamics and operable coating windows of a polymeric paint (primer) with shear-thinning rheological property have been correlated with processing parameters such as speed ratio and metering gap between pick-up and metering rolls. In the uniform coating regime, dry coating thickness increased with increasing metering gap or decreasing speed ratio. Ribbing and cascade instabilities were observed in low speed and high speed ratio conditions, respectively. It is revealed that lower speed ratio makes severity and wavelength of the ribbing increase, aggravating flow instability in coating systems.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.983-988
• /
• 2009

When the railway vehicle passing through curves & transitions, the running speed must improve by proposing the practical standard about maximum running possibility speed of each section on existing line considering running safety. In this paper, when the railway vehicle passing through curves of actual track conditions (Namsunghyun-Chungdo up & down lines), the effect that has influence on running safety is examined to devise the high speed of vehicle which passing through curves which risk of derailment is high. The running safety analysis is performed that running speed by curve radius improves 5-20% compared with existing speed under actual track conditions. In result of the running safety analysis, in case the speed condition is fewer than 15% compared with existing speed, the derailment coefficient and unloading ratio are within acceptable level. so we could confirm possibility of speed improvement on the whole Namsunghyun-Chungdo up & down lines.