• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.529-531
• /
• 1990

Because Filters do both the sampling or Sampled-and-Hold(S/H) operations, it result in the replication of the spectrum of input signal and (unless Nyquist's criterion is satisfied) induce aliasing distortion. In this paper, therefore, we designed AAF(Analog Anti-aliasing Filers) so as to remove high-frequency components from input signal for aliasing distortion prevention before input signal had been processed frequency seletion by filters. and then, researched characteristics of it.

• Speech Sciences
• /
• v.4 no.2
• /
• pp.5-15
• /
• 1998

This paper proposes a speech state-dependent spectral subtraction method to regulate the blind spectral subtraction for improved enhancement. In the proposed method, a modified subtraction rule is applied over the speech selectively contingent to the speech state being voiced or unvoiced, in an effort to incorporate the acoustic characteristics of phonemes. In particular, the objective of the proposed method is to remedy the subtraction induced signal distortion attained by two state-dependent procedures, spectrum sharpening and minimum spectral bound. In order to remove the residual noise, the proposed method employs a procedure utilizing the masking effect. Proposed spectral subtraction including state-dependent subtraction and residual noise reduction using the masking threshold shows effectiveness in compensation of spectral distortion in the unvoiced region and residual noise reduction.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.2
• /
• pp.50-55
• /
• 2000

This paper presents the feature extraction of fault currents related to the multi-shot reclosing scheme in the power distribution system. In order to get the fault current waveform, we have measured the fault currents by the fault recorders which have been installed at the secondary side of 154/22.9[kV] substation transformer. These waveforms are classified into temporary and permanent fault. For the classified waveforms, Fourier transform is used to extract the feature of the fault current waveforms. After the waveforms are analyzed by using Fourier transform, the magnitude spectrum and the relative variation of THD (Total Harmonic Distortion) are calculated. And then the relative variation of THD is great in the temporary faults, and is small in the permanent faults.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.6
• /
• pp.740-743
• /
• 1993

By considering both electron-electron and electron-lattice interactions, the effect of charge transfer on the bond structure and electronic states of $C_{60}$ is studied without configuration limitation. The results show that the electron-electron interaction does not eliminate the layer structure of the bond distortion and the self-trapping of transferred electrons. For charged ${C_{60}}^{2-}$, there exist two localized electronic states, which possess laminar wave functions, and four nonequivalent groups of carbon atoms, which induce a fine-structure in the NMR spectrum line.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.38-44
• /
• 2022

Speech enhancement is performed to improve intelligibility and quality of the noise-corrupted speech. In this paper, speech enhancement performance was compared using different loss functions in time and frequency domains. This study proposes a combination of loss functions to utilize advantage of each domain by considering both the details of spectrum and the speech waveform. In our study, Scale Invariant-Source to Noise Ratio (SI-SNR) is used for the time domain loss function, and Mean Squared Error (MSE) is used for the frequency domain, which is calculated over the complex-valued spectrum and magnitude spectrum. The phase loss is obtained using the sin function. Speech enhancement result is evaluated using Source-to-Distortion Ratio (SDR), Perceptual Evaluation of Speech Quality (PESQ), and Short-Time Objective Intelligibility (STOI). In order to confirm the result of speech enhancement, resulting spectrograms are also compared. The experimental results over the TIMIT database show the highest performance when using combination of SI-SNR and magnitude loss functions.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.174-181
• /
• 1999

This paper describes the effect of the stylus tip size on the shape error in surface topography measurement. To analyze the distortional effect of an actual surface geometry origination from the finite stylus size, the surface is modeled as a sinusoid and the stylus tip as a circle. The magnitude of this distortion is defined as the ration of standard deviation, and this is expressed as an analytic function of the stylus tip radius and the geometrical parameter of a sinusoid. In this paper, the spectrum analysis of the profile is applied to investigate the distortional effect due to the mechanical filtering of the stylus in the frequency domain. and, the cumulative power spectrum is proposed to assess the shape error of measured data according to the various stylus tip sizes. From these results, a new method to select proper stylus tip radius is proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.10
• /
• pp.2634-2644
• /
• 1996

Two different low rate speech coders using one of four types of lattice vector quantizers(LVQ's) with fairly low complexity were investigated for an application to mobile communications. More specifically, two-stage vector quantizer-lattic vector quantizer(VQ-LVQ) systems and vector differenctial pulse code modulation(VDPCM)systems with lattice vector quantizers simulated to encode the line spectrum frequencies of various sentences at the rate 22 to 39 bits per 20 msec frame. The simulation results showed that the VDPCM system with the lattice VQ can save up to 10 bits/fram compared to the quantization scheme used in QCELP system. For the VQ-LVQ system, the spherical quasi-uniform LVQ below 36 bits/frame outperformed the other 3 types of LVQ's and the pyramidal quasi-uniform LVQ at 37 bits/frame outperformed the other 3 types of LVQ's with the spectral distortion 0.97.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.181-182
• /
• 2007

Wireless home theater and speaker system was designed. That has 20W output per channel, 0.1% THD (Total Harmonic Distortion) and automatic algorithm avoiding noise. The 3D stereophonic sound was realized through the wireless 5.1channel speaker system designed. That could be secured 0.4% improvement effect of THD compared with wire speaker systems. Specially in transfer sound with wireless, Frequency Hopping Spread Spectrum was superior than Direct Sequence Spread Spectrum in household electric appliances and wireless internet environment that radiated noise similar with ISM Band using 2.4GHz.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.1009-1014
• /
• 1994

This paper improves the previously proposed spectral mapping method for supervised speaker adaptation in which a mapped spectrum is interpolated from speaker difference vectors at typical spectra based on a minimized distortion criterion. In estimating these difference vectors, it is important to find an appropriate number of typical points. The previous method empirically adjusts the number of typical points, while the present method optimizes the effective number by rank reduction of normal equation. This algorithm was applied to a supervised speaker adaptation for Korean word recognition using the templates form a prototype male speaker. The result showed that the rank reduction technique not only can automatically determine an optimal number of code vectors, but also slightly improves the recognition scores compared with those obtained by the previous method.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.1015-1020
• /
• 1994

This paper presents the Korean digit recognition method under noise environment using the spectral mapping training based on static supervised adaptation algorithm. In the presented recognition method, as a result of spectral mapping from one space of noisy speech spectrum to another space of speech spectrum without noise, spectral distortion of noisy speech is improved, and the recognition rate is higher than that of the conventional method using VQ and DTW without noise processing, and even when SNR level is 0 dB, the recognition rate is 10 times of that using the conventional method. It has been confirmed that the spectral mapping training has an ability to improve the recognition performance for speech in noise environment.